Home> Products> water management procedures

{ "products": [ { "_id": "64dd17a3635f2700010a84f5", "fptag": "EDUCAREADV", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "Bentley OpenFlows SewerGEMS Virtuosity- Unlimited Pipes Annual Subscription License", "description": "Home> Products> Bentley OpenFlows SewerGEMS Virtuosity- 10000 Pipes Annual Subscription License\nBentley OpenFlows SewerGEMS Virtuosity- 10000 Pipes Annual Subscription License\nHome> Products> Bentley OpenFlows SewerGEMS Virtuosity- 10000 Pipes Annual Subscription License\n18000 18000\nDescriptionWastewat\nDescription\nDescription\nBentley Software by Bentley\nBentley OpenFlows SewerGEMS Virtuosity- 10000 Pipes Annual Subscription License\nINR 632269 INR 650269\nYou Save: INR 18000 (2.77%)\nCHECK ONSEND ENQUIRY\nShare this on : \nDescription\nDescription\nWastewater and stormwater management software\nAdvanced tools for sanitary and combined sewer models\nSewerGEMS is an easy-to-use advanced engineering software for you to analyze, design, and operate sanitary and combined sewer systems. You can decrease decision risks by ensuring that the model uses the best available data, built-in hydraulic and hydrology capabilities, and a variety of wet-weather calibration methods. Easily create what-if scenarios to gain a better understanding of wastewater systems to make smarter decisions, and you can improve your response times. SCADA integration provides you with reliable model results, improves capacity and limits sewer overflows. This enables you to comply with sewer regulations set by regulatory agencies. Better understand surface flood depth and velocity, flood hazard, and inundation times with the new user-friendly 1D/2D hydraulic analysis capability.\n\n\n#Interoperability, Interface, and Graphical Editing\nRuns from within four compatible platforms:\nStand-alone Windows\nArcGIS (ArcMap license required)\nMicroStation (MicroStation license required)\nAutoCAD (AutoCAD license required)\nUnlimited undo and redo\nElement morphing, splitting, and reconnection\nMerge nodes in close proximity tool\nAutomatic element labeling\nScaled, schematic, and hybrid environments\nElement prototypes\nAerial view and dynamic zooming\nNamed views library\nMultiple background-layer support\nSeamless compatibility with WaterCAD and HAMMER\n\n\n#Hydraulics, Operations, and Water Quality\nSteady-state and extended-period simulations\nConstituent-concentration analysis\nMulti-species water quality analysis\nTank-mixing analysis\nWater-age analysis\nWater quality batch run\nCriticality analysis\nFire-flow analysis\nRule-based or logical controls\nVariable-speed pumping, with option to use APEX (Automatic Parameter Estimation eXtension)\nNPSH analysis\nSystem head curves\nLeakage and sprinkler modeling\nWater loss analysis\nPressure-dependent demands\nConventional and unidirectional flushing simulations\nSource tracing\nValve modeling\nAir release valve element\nTop fill tank element\nCombination pump curves\nCarbon emission calculation\nOptimization of pipe renewal with Pipe Renewal Planner\nOverride of pump and valve controls using historical SCADA data\nEmergency response simulations for pipe breaks, power outages, fires, and pipe shutdowns\nReal time modeling\nPressure Zone management\nSupport Districted Metered Areas (DMA) design\n\n\n#Model Building and Data Connection\nDGN, DXF, spreadsheet, database, and ODBC connections\nShapefile, geodatabase*, Geometric Network*, and SDE* connections (*when running from within ArcMap)\nOracle Spatial support\nGIS-ID property to maintain associations between records in the data source / GIS and elements in the model\nSCADAConnect unlimited-signal pack for live data connections (to and from SCADA systems)\nGraphical SCADA element\nCustomer Meter element\nLateral link (no need to split pipes) Automatic demand allocation from geospatial data\nGeospatial demand allocation from customer meters\nDemand allocation from lump-sum geospatial data\nGeospatial-based water consumption projection\nDaily, weekly, monthly, and superimposed patterns\nUnaccounted for water and leakage estimation\nComposite demands global edition\nArea, count, discharge, and population-based loading\nPipe-length-based demand loading\nElevation extraction from DEM, TIN, and shapefiles\nElevation extraction from CAD drawings and surfaces\nSeries, parallel, branch-trimming, multi-criteria automated skeletonization of pipes\nSkeletonization support for isolation valves\nUser-data extension, including formula based\nBing Maps support\nModel sync In/Out, update a model or sync out to an external file\n\n#Model Management\nUnlimited scenarios and alternatives\nComprehensive scenario management\nGlobal attribute tabular edition\nAutomated model skeletonization\nPersonalizable engineering libraries\nSorting and persistent filtering on tabular reports\nStatistical analysis from tabular reports\nDynamic and static selection sets\nLocal and global engineering-units management\nSub-model management\nDrawing review tools for connectivity consistency\nAutomatic topology review\nOrphaned nodes and dead-end pipes queries\nChange tracking\n#Results Presentation\nThematic mapping with property-based color-coding, symbology, and annotations\nDynamic, multi-parameter, and multi-scenario graphing\nScenario and element comparison\nShapefile contouring\nAdvance profiling\nAdvanced tabular reporting with FlexTables\nCreation of Google Earth (KML) files\nPublishing of i-models in 2D or 3D, including to Bentley Map® Mobile\nVideo recording of result animation\nCustomizable reports\n\n#Optimization (using Genetic Algorithm)\nAutomated model calibration with Darwin Calibrator\nIdentify leaks locations with Darwin Calibrator\nOptimized design and rehabilitation with Darwin Designer\nOptimized pump scheduling with Darwin Scheduler\n\n#Energy and Capital-cost Management\nEnergy cost analysis\nCapital cost analysis\nPump and turbine energy analysis", "price": 869773.0, "discountamount": 43000.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": null, "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 56, "imageuri": "https://productimages.withfloats.com/actual/64dd17a9a673410001642e2f.png", "tileimageuri": "https://productimages.withfloats.com/tile/64dd17a9a673410001642e2f.png", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2023-08-16T18:38:27.407Z", "updatedon": "2024-04-01T12:07:18.04Z", "buyonlinelink": null, "producturl": "http://WWW.ADVEDUCARE.COM/products/bentley-openflows-sewergems-virtuosity-unlimited-pipes-annual-subscription-license/56", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "Bentley", "category": "Bentley Software", "tags": [ "SewerGEMS", "watergems", "Bentley software", "bentley systems" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "UniquePaymentUrl", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "64dd131f7191e90001251b6f", "fptag": "EDUCAREADV", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "Bentley OpenFlows SewerGEMS Virtuosity- 10000 Pipes Annual Subscription License", "description": "Description\nWastewater and stormwater management software\nAdvanced tools for sanitary and combined sewer models\nSewerGEMS is an easy-to-use advanced engineering software for you to analyze, design, and operate sanitary and combined sewer systems. You can decrease decision risks by ensuring that the model uses the best available data, built-in hydraulic and hydrology capabilities, and a variety of wet-weather calibration methods. Easily create what-if scenarios to gain a better understanding of wastewater systems to make smarter decisions, and you can improve your response times. SCADA integration provides you with reliable model results, improves capacity and limits sewer overflows. This enables you to comply with sewer regulations set by regulatory agencies. Better understand surface flood depth and velocity, flood hazard, and inundation times with the new user-friendly 1D/2D hydraulic analysis capability.\n\n\n#Interoperability, Interface, and Graphical Editing\nRuns from within four compatible platforms:\nStand-alone Windows\nArcGIS (ArcMap license required)\nMicroStation (MicroStation license required)\nAutoCAD (AutoCAD license required)\nUnlimited undo and redo\nElement morphing, splitting, and reconnection\nMerge nodes in close proximity tool\nAutomatic element labeling\nScaled, schematic, and hybrid environments\nElement prototypes\nAerial view and dynamic zooming\nNamed views library\nMultiple background-layer support\nSeamless compatibility with WaterCAD and HAMMER\n\n\n#Hydraulics, Operations, and Water Quality\nSteady-state and extended-period simulations\nConstituent-concentration analysis\nMulti-species water quality analysis\nTank-mixing analysis\nWater-age analysis\nWater quality batch run\nCriticality analysis\nFire-flow analysis\nRule-based or logical controls\nVariable-speed pumping, with option to use APEX (Automatic Parameter Estimation eXtension)\nNPSH analysis\nSystem head curves\nLeakage and sprinkler modeling\nWater loss analysis\nPressure-dependent demands\nConventional and unidirectional flushing simulations\nSource tracing\nValve modeling\nAir release valve element\nTop fill tank element\nCombination pump curves\nCarbon emission calculation\nOptimization of pipe renewal with Pipe Renewal Planner\nOverride of pump and valve controls using historical SCADA data\nEmergency response simulations for pipe breaks, power outages, fires, and pipe shutdowns\nReal time modeling\nPressure Zone management\nSupport Districted Metered Areas (DMA) design\n\n\n#Model Building and Data Connection\nDGN, DXF, spreadsheet, database, and ODBC connections\nShapefile, geodatabase*, Geometric Network*, and SDE* connections (*when running from within ArcMap)\nOracle Spatial support\nGIS-ID property to maintain associations between records in the data source / GIS and elements in the model\nSCADAConnect unlimited-signal pack for live data connections (to and from SCADA systems)\nGraphical SCADA element\nCustomer Meter element\nLateral link (no need to split pipes) Automatic demand allocation from geospatial data\nGeospatial demand allocation from customer meters\nDemand allocation from lump-sum geospatial data\nGeospatial-based water consumption projection\nDaily, weekly, monthly, and superimposed patterns\nUnaccounted for water and leakage estimation\nComposite demands global edition\nArea, count, discharge, and population-based loading\nPipe-length-based demand loading\nElevation extraction from DEM, TIN, and shapefiles\nElevation extraction from CAD drawings and surfaces\nSeries, parallel, branch-trimming, multi-criteria automated skeletonization of pipes\nSkeletonization support for isolation valves\nUser-data extension, including formula based\nBing Maps support\nModel sync In/Out, update a model or sync out to an external file\n\n#Model Management\nUnlimited scenarios and alternatives\nComprehensive scenario management\nGlobal attribute tabular edition\nAutomated model skeletonization\nPersonalizable engineering libraries\nSorting and persistent filtering on tabular reports\nStatistical analysis from tabular reports\nDynamic and static selection sets\nLocal and global engineering-units management\nSub-model management\nDrawing review tools for connectivity consistency\nAutomatic topology review\nOrphaned nodes and dead-end pipes queries\nChange tracking\n#Results Presentation\nThematic mapping with property-based color-coding, symbology, and annotations\nDynamic, multi-parameter, and multi-scenario graphing\nScenario and element comparison\nShapefile contouring\nAdvance profiling\nAdvanced tabular reporting with FlexTables\nCreation of Google Earth (KML) files\nPublishing of i-models in 2D or 3D, including to Bentley Map® Mobile\nVideo recording of result animation\nCustomizable reports\n\n#Optimization (using Genetic Algorithm)\nAutomated model calibration with Darwin Calibrator\nIdentify leaks locations with Darwin Calibrator\nOptimized design and rehabilitation with Darwin Designer\nOptimized pump scheduling with Darwin Scheduler\n\n#Energy and Capital-cost Management\nEnergy cost analysis\nCapital cost analysis\nPump and turbine energy analysis", "price": 695788.0, "discountamount": 34000.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "3D", "DMA", "DGN", "DXF", "redo", "APEX", "fires", "Local", "count", "ArcGIS", "HAMMER", "option", "weekly", "records", "variety", "formula", "monthly", "Override", "elements", "sanitary", "database", "WaterCAD", "i-models", "capacity", "Creation", "velocity", "schematic", "discharge", "Interface", "symbology", "splitting", "Rule-based", "Operations", "Hydraulics", "shapefiles", "FlexTables", "data source", "Aerial view", "Merge nodes", "Description", "spreadsheet", "pipe breaks", "review tools", "Lateral link", "CAD drawings", "flood hazard", "Google Earth", "Optimization", "Steady-state", "Conventional", "alternatives", "associations", "reconnection", "external file", "views library", "power outages", "SCADA systems", "understanding", "Advanced tools", "Valve modeling", "valve controls", "Unlimited undo", "decision risks", "global edition", "response times", "Orphaned nodes", "rehabilitation", "ArcMap license", "pipe shutdowns", "sewer overflows", "pump scheduling", "leaks locations", "Darwin Designer", "dynamic zooming", "surfaces Series", "AutoCAD license", "Change tracking", "Video recording", "tabular reports", "customer meters", "logical controls", "inundation times", "isolation valves", "Thematic mapping", "Darwin Scheduler", "ODBC connections", "result animation", "Interoperability", "SDE* connections", "Composite demands", "Graphical Editing", "sewer regulations", "SCADA integration", "Bentley OpenFlows", "model calibration", "Darwin Calibrator", "Genetic Algorithm", "smarter decisions", "Advance profiling", "Bing Maps support", "Geometric Network", "leakage estimation", "Real time modeling", "element comparison", "Water-age analysis", "wastewater systems", "sprinkler modeling", "Fire-flow analysis", "Bentley Map® Mobile", "User-data extension", "Unlimited scenarios", "Water loss analysis", "regulatory agencies", "surface flood depth", "best available data", "Shapefile contouring", "MicroStation license", "Customizable reports", "Energy cost analysis", "persistent filtering", "Pipe Renewal Planner", "Sub-model management", "Tank-mixing analysis", "Statistical analysis", "Elevation extraction", "Criticality analysis", "close proximity tool", "static selection sets", "Capital cost analysis", "historical SCADA data", "combined sewer models", "model skeletonization", "KML) files Publishing", "live data connections", "superimposed patterns", "hydrology capabilities", "combined sewer systems", "Customer Meter element", "Oracle Spatial support", "dead-end pipes queries", "Variable-speed pumping", "Seamless compatibility", "reliable model results", "Skeletonization support", "Graphical SCADA element", "multi-scenario graphing", "Water quality batch run", "Capital-cost Management", "turbine energy analysis", "Pressure Zone management", "population-based loading", "lump-sum geospatial data", "connectivity consistency", "Air release valve element", "Automatic topology review", "four compatible platforms", "Pressure-dependent demands", "Automatic element labeling", "Advanced tabular reporting", "Automatic demand allocation", "Carbon emission calculation", "property-based color-coding", "extended-period simulations", "Geospatial demand allocation", "advanced engineering software", "Emergency response simulations", "stormwater management software", "wet-weather calibration methods", "Pipe-length-based demand loading", "Global attribute tabular edition", "NPSH analysis System head curves", "Support Districted Metered Areas", "Comprehensive scenario management", "Multiple background-layer support", "SCADAConnect unlimited-signal pack", "Constituent-concentration analysis", "global engineering-units management", "Personalizable engineering libraries", "Multi-species water quality analysis", "annotations Dynamic, multi-parameter", "hybrid environments Element prototypes", "Automatic Parameter Estimation eXtension", "Top fill tank element Combination pump curves", "unidirectional flushing simulations Source tracing", "Geospatial-based water consumption projection Daily", "new user-friendly 1D/2D hydraulic analysis capability", "SewerGEMS Virtuosity- 10000 Pipes Annual Subscription License", "parallel, branch-trimming, multi-criteria automated skeletonization" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 55, "imageuri": "https://productimages.withfloats.com/actual/64dd1321f3aede0001adbdfb.png", "tileimageuri": "https://productimages.withfloats.com/tile/64dd1321f3aede0001adbdfb.png", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2023-08-16T18:19:11.158Z", "updatedon": "2024-04-01T12:08:29.492Z", "buyonlinelink": null, "producturl": "http://WWW.ADVEDUCARE.COM/products/bentley-openflows-sewergems-virtuosity-10000-pipes-annual-subscription-license/55", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "Bentley", "category": "Bentley Software", "tags": [ "watergems", "Bentley software", "bentley systems", "SewerGEMS" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "UniquePaymentUrl", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "64dd119918b1700001ed9938", "fptag": "EDUCAREADV", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "Bentley OpenFlows SewerGEMS Virtuosity- 5000 Pipes Annual Subscription License", "description": "Description\nWastewater and stormwater management software\nAdvanced tools for sanitary and combined sewer models\nSewerGEMS is an easy-to-use advanced engineering software for you to analyze, design, and operate sanitary and combined sewer systems. You can decrease decision risks by ensuring that the model uses the best available data, built-in hydraulic and hydrology capabilities, and a variety of wet-weather calibration methods. Easily create what-if scenarios to gain a better understanding of wastewater systems to make smarter decisions, and you can improve your response times. SCADA integration provides you with reliable model results, improves capacity and limits sewer overflows. This enables you to comply with sewer regulations set by regulatory agencies. Better understand surface flood depth and velocity, flood hazard, and inundation times with the new user-friendly 1D/2D hydraulic analysis capability.\n\n\n#Interoperability, Interface, and Graphical Editing\nRuns from within four compatible platforms:\nStand-alone Windows\nArcGIS (ArcMap license required)\nMicroStation (MicroStation license required)\nAutoCAD (AutoCAD license required)\nUnlimited undo and redo\nElement morphing, splitting, and reconnection\nMerge nodes in close proximity tool\nAutomatic element labeling\nScaled, schematic, and hybrid environments\nElement prototypes\nAerial view and dynamic zooming\nNamed views library\nMultiple background-layer support\nSeamless compatibility with WaterCAD and HAMMER\n\n\n#Hydraulics, Operations, and Water Quality\nSteady-state and extended-period simulations\nConstituent-concentration analysis\nMulti-species water quality analysis\nTank-mixing analysis\nWater-age analysis\nWater quality batch run\nCriticality analysis\nFire-flow analysis\nRule-based or logical controls\nVariable-speed pumping, with option to use APEX (Automatic Parameter Estimation eXtension)\nNPSH analysis\nSystem head curves\nLeakage and sprinkler modeling\nWater loss analysis\nPressure-dependent demands\nConventional and unidirectional flushing simulations\nSource tracing\nValve modeling\nAir release valve element\nTop fill tank element\nCombination pump curves\nCarbon emission calculation\nOptimization of pipe renewal with Pipe Renewal Planner\nOverride of pump and valve controls using historical SCADA data\nEmergency response simulations for pipe breaks, power outages, fires, and pipe shutdowns\nReal time modeling\nPressure Zone management\nSupport Districted Metered Areas (DMA) design\n\n\n#Model Building and Data Connection\nDGN, DXF, spreadsheet, database, and ODBC connections\nShapefile, geodatabase*, Geometric Network*, and SDE* connections (*when running from within ArcMap)\nOracle Spatial support\nGIS-ID property to maintain associations between records in the data source / GIS and elements in the model\nSCADAConnect unlimited-signal pack for live data connections (to and from SCADA systems)\nGraphical SCADA element\nCustomer Meter element\nLateral link (no need to split pipes) Automatic demand allocation from geospatial data\nGeospatial demand allocation from customer meters\nDemand allocation from lump-sum geospatial data\nGeospatial-based water consumption projection\nDaily, weekly, monthly, and superimposed patterns\nUnaccounted for water and leakage estimation\nComposite demands global edition\nArea, count, discharge, and population-based loading\nPipe-length-based demand loading\nElevation extraction from DEM, TIN, and shapefiles\nElevation extraction from CAD drawings and surfaces\nSeries, parallel, branch-trimming, multi-criteria automated skeletonization of pipes\nSkeletonization support for isolation valves\nUser-data extension, including formula based\nBing Maps support\nModel sync In/Out, update a model or sync out to an external file\n\n#Model Management\nUnlimited scenarios and alternatives\nComprehensive scenario management\nGlobal attribute tabular edition\nAutomated model skeletonization\nPersonalizable engineering libraries\nSorting and persistent filtering on tabular reports\nStatistical analysis from tabular reports\nDynamic and static selection sets\nLocal and global engineering-units management\nSub-model management\nDrawing review tools for connectivity consistency\nAutomatic topology review\nOrphaned nodes and dead-end pipes queries\nChange tracking\n#Results Presentation\nThematic mapping with property-based color-coding, symbology, and annotations\nDynamic, multi-parameter, and multi-scenario graphing\nScenario and element comparison\nShapefile contouring\nAdvance profiling\nAdvanced tabular reporting with FlexTables\nCreation of Google Earth (KML) files\nPublishing of i-models in 2D or 3D, including to Bentley Map® Mobile\nVideo recording of result animation\nCustomizable reports\n\n#Optimization (using Genetic Algorithm)\nAutomated model calibration with Darwin Calibrator\nIdentify leaks locations with Darwin Calibrator\nOptimized design and rehabilitation with Darwin Designer\nOptimized pump scheduling with Darwin Scheduler\n\n#Energy and Capital-cost Management\nEnergy cost analysis\nCapital cost analysis\nPump and turbine energy analysis", "price": 521795.0, "discountamount": 26000.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": null, "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 54, "imageuri": "https://productimages.withfloats.com/actual/64dd16357e90100001193e7e.png", "tileimageuri": "https://productimages.withfloats.com/tile/64dd16357e90100001193e7e.png", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2023-08-16T18:12:41.218Z", "updatedon": "2024-04-01T12:09:32.057Z", "buyonlinelink": null, "producturl": "http://WWW.ADVEDUCARE.COM//bentley-openflows-sewergems-virtuosity-5000-pipes-annual-subscription-license/54", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "Bentley", "category": "Bentley Software", "tags": [ "SewerGEMS", "watergems", "water distribution", "Bentley software", "bentley systems" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "UniquePaymentUrl", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "64dd0f859b00660001a671f5", "fptag": "EDUCAREADV", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": " Bentley OpenFlows SewerGEMS Virtuosity- 2000 Pipes Annual Subscription License", "description": "Description\nWastewater and stormwater management software\nAdvanced tools for sanitary and combined sewer models\nSewerGEMS is an easy-to-use advanced engineering software for you to analyze, design, and operate sanitary and combined sewer systems. You can decrease decision risks by ensuring that the model uses the best available data, built-in hydraulic and hydrology capabilities, and a variety of wet-weather calibration methods. Easily create what-if scenarios to gain a better understanding of wastewater systems to make smarter decisions, and you can improve your response times. SCADA integration provides you with reliable model results, improves capacity and limits sewer overflows. This enables you to comply with sewer regulations set by regulatory agencies. Better understand surface flood depth and velocity, flood hazard, and inundation times with the new user-friendly 1D/2D hydraulic analysis capability.\n\n\n#Interoperability, Interface, and Graphical Editing\nRuns from within four compatible platforms:\nStand-alone Windows\nArcGIS (ArcMap license required)\nMicroStation (MicroStation license required)\nAutoCAD (AutoCAD license required)\nUnlimited undo and redo\nElement morphing, splitting, and reconnection\nMerge nodes in close proximity tool\nAutomatic element labeling\nScaled, schematic, and hybrid environments\nElement prototypes\nAerial view and dynamic zooming\nNamed views library\nMultiple background-layer support\nSeamless compatibility with WaterCAD and HAMMER\n\n\n#Hydraulics, Operations, and Water Quality\nSteady-state and extended-period simulations\nConstituent-concentration analysis\nMulti-species water quality analysis\nTank-mixing analysis\nWater-age analysis\nWater quality batch run\nCriticality analysis\nFire-flow analysis\nRule-based or logical controls\nVariable-speed pumping, with option to use APEX (Automatic Parameter Estimation eXtension)\nNPSH analysis\nSystem head curves\nLeakage and sprinkler modeling\nWater loss analysis\nPressure-dependent demands\nConventional and unidirectional flushing simulations\nSource tracing\nValve modeling\nAir release valve element\nTop fill tank element\nCombination pump curves\nCarbon emission calculation\nOptimization of pipe renewal with Pipe Renewal Planner\nOverride of pump and valve controls using historical SCADA data\nEmergency response simulations for pipe breaks, power outages, fires, and pipe shutdowns\nReal time modeling\nPressure Zone management\nSupport Districted Metered Areas (DMA) design\n\n\n#Model Building and Data Connection\nDGN, DXF, spreadsheet, database, and ODBC connections\nShapefile, geodatabase*, Geometric Network*, and SDE* connections (*when running from within ArcMap)\nOracle Spatial support\nGIS-ID property to maintain associations between records in the data source / GIS and elements in the model\nSCADAConnect unlimited-signal pack for live data connections (to and from SCADA systems)\nGraphical SCADA element\nCustomer Meter element\nLateral link (no need to split pipes) Automatic demand allocation from geospatial data\nGeospatial demand allocation from customer meters\nDemand allocation from lump-sum geospatial data\nGeospatial-based water consumption projection\nDaily, weekly, monthly, and superimposed patterns\nUnaccounted for water and leakage estimation\nComposite demands global edition\nArea, count, discharge, and population-based loading\nPipe-length-based demand loading\nElevation extraction from DEM, TIN, and shapefiles\nElevation extraction from CAD drawings and surfaces\nSeries, parallel, branch-trimming, multi-criteria automated skeletonization of pipes\nSkeletonization support for isolation valves\nUser-data extension, including formula based\nBing Maps support\nModel sync In/Out, update a model or sync out to an external file\n\n#Model Management\nUnlimited scenarios and alternatives\nComprehensive scenario management\nGlobal attribute tabular edition\nAutomated model skeletonization\nPersonalizable engineering libraries\nSorting and persistent filtering on tabular reports\nStatistical analysis from tabular reports\nDynamic and static selection sets\nLocal and global engineering-units management\nSub-model management\nDrawing review tools for connectivity consistency\nAutomatic topology review\nOrphaned nodes and dead-end pipes queries\nChange tracking\n#Results Presentation\nThematic mapping with property-based color-coding, symbology, and annotations\nDynamic, multi-parameter, and multi-scenario graphing\nScenario and element comparison\nShapefile contouring\nAdvance profiling\nAdvanced tabular reporting with FlexTables\nCreation of Google Earth (KML) files\nPublishing of i-models in 2D or 3D, including to Bentley Map® Mobile\nVideo recording of result animation\nCustomizable reports\n\n#Optimization (using Genetic Algorithm)\nAutomated model calibration with Darwin Calibrator\nIdentify leaks locations with Darwin Calibrator\nOptimized design and rehabilitation with Darwin Designer\nOptimized pump scheduling with Darwin Scheduler\n\n#Energy and Capital-cost Management\nEnergy cost analysis\nCapital cost analysis\nPump and turbine energy analysis", "price": 452201.0, "discountamount": 22000.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "3D", "DXF", "DMA", "DGN", "redo", "APEX", "Local", "count", "fires", "ArcGIS", "weekly", "HAMMER", "option", "monthly", "records", "variety", "formula", "Override", "i-models", "capacity", "WaterCAD", "sanitary", "velocity", "Creation", "database", "elements", "Interface", "schematic", "splitting", "discharge", "symbology", "FlexTables", "Rule-based", "Operations", "Hydraulics", "shapefiles", "Description", "Aerial view", "Merge nodes", "pipe breaks", "spreadsheet", "data source", "Steady-state", "flood hazard", "Conventional", "Google Earth", "CAD drawings", "Lateral link", "associations", "alternatives", "review tools", "reconnection", "Optimization", "external file", "SCADA systems", "power outages", "understanding", "views library", "response times", "pipe shutdowns", "valve controls", "Advanced tools", "decision risks", "Unlimited undo", "Valve modeling", "global edition", "ArcMap license", "Orphaned nodes", "rehabilitation", "Darwin Designer", "sewer overflows", "leaks locations", "Change tracking", "pump scheduling", "AutoCAD license", "Video recording", "customer meters", "dynamic zooming", "tabular reports", "surfaces Series", "result animation", "Thematic mapping", "SDE* connections", "ODBC connections", "inundation times", "logical controls", "isolation valves", "Interoperability", "Darwin Scheduler", "Graphical Editing", "sewer regulations", "SCADA integration", "Composite demands", "Geometric Network", "Darwin Calibrator", "model calibration", "Advance profiling", "Genetic Algorithm", "smarter decisions", "Bing Maps support", "element comparison", "Water-age analysis", "Real time modeling", "leakage estimation", "wastewater systems", "sprinkler modeling", "Fire-flow analysis", "User-data extension", "best available data", "Bentley Map® Mobile", "regulatory agencies", "surface flood depth", "Unlimited scenarios", "Water loss analysis", "Energy cost analysis", "Shapefile contouring", "close proximity tool", "persistent filtering", "Customizable reports", "Pipe Renewal Planner", "MicroStation license", "Elevation extraction", "Tank-mixing analysis", "Criticality analysis", "Statistical analysis", "Sub-model management", "KML) files Publishing", "static selection sets", "combined sewer models", "live data connections", "Capital cost analysis", "historical SCADA data", "model skeletonization", "superimposed patterns", "combined sewer systems", "Customer Meter element", "dead-end pipes queries", "Seamless compatibility", "Variable-speed pumping", "Oracle Spatial support", "hydrology capabilities", "reliable model results", "Graphical SCADA element", "Skeletonization support", "turbine energy analysis", "Water quality batch run", "Capital-cost Management", "multi-scenario graphing", "Pressure Zone management", "connectivity consistency", "population-based loading", "lump-sum geospatial data", "four compatible platforms", "Air release valve element", "Automatic topology review", "Automatic element labeling", "Advanced tabular reporting", "Pressure-dependent demands", "extended-period simulations", "Carbon emission calculation", "Automatic demand allocation", "property-based color-coding", "Geospatial demand allocation", "advanced engineering software", "Emergency response simulations", "stormwater management software", "wet-weather calibration methods", "Support Districted Metered Areas", "Pipe-length-based demand loading", "Global attribute tabular edition", "NPSH analysis System head curves", "Multiple background-layer support", "Comprehensive scenario management", "Constituent-concentration analysis", "SCADAConnect unlimited-signal pack", "global engineering-units management", "Multi-species water quality analysis", "Personalizable engineering libraries", "annotations Dynamic, multi-parameter", "hybrid environments Element prototypes", "Automatic Parameter Estimation eXtension", "Top fill tank element Combination pump curves", "unidirectional flushing simulations Source tracing", "Geospatial-based water consumption projection Daily", "new user-friendly 1D/2D hydraulic analysis capability", "parallel, branch-trimming, multi-criteria automated skeletonization", "DBentley OpenFlows SewerGEMS Virtuosity- 2000 Pipes Annual Subscription License" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 53, "imageuri": "https://productimages.withfloats.com/actual/64dd1606642e540001179c22.png", "tileimageuri": "https://productimages.withfloats.com/tile/64dd1606642e540001179c22.png", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2023-08-16T18:03:49.744Z", "updatedon": "2024-04-01T12:10:14.886Z", "buyonlinelink": null, "producturl": "http://WWW.ADVEDUCARE.COM//-bentley-openflows-sewergems-virtuosity-2000-pipes-annual-subscription-license/53", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "Bentley", "category": "Bentley Software", "tags": [ "SewerGEMS", "watergems", "Bentley software", "bentley systems" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "UniquePaymentUrl", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "64dd0e429b00660001a671e3", "fptag": "EDUCAREADV", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "OpenFlows SewerGEMS Virtuosity- 1000 Pipes Annual Subscription License", "description": "Description\nWastewater and stormwater management software\nAdvanced tools for sanitary and combined sewer models\nSewerGEMS is an easy-to-use advanced engineering software for you to analyze, design, and operate sanitary and combined sewer systems. You can decrease decision risks by ensuring that the model uses the best available data, built-in hydraulic and hydrology capabilities, and a variety of wet-weather calibration methods. Easily create what-if scenarios to gain a better understanding of wastewater systems to make smarter decisions, and you can improve your response times. SCADA integration provides you with reliable model results, improves capacity and limits sewer overflows. This enables you to comply with sewer regulations set by regulatory agencies. Better understand surface flood depth and velocity, flood hazard, and inundation times with the new user-friendly 1D/2D hydraulic analysis capability.\n\n\n#Interoperability, Interface, and Graphical Editing\nRuns from within four compatible platforms:\nStand-alone Windows\nArcGIS (ArcMap license required)\nMicroStation (MicroStation license required)\nAutoCAD (AutoCAD license required)\nUnlimited undo and redo\nElement morphing, splitting, and reconnection\nMerge nodes in close proximity tool\nAutomatic element labeling\nScaled, schematic, and hybrid environments\nElement prototypes\nAerial view and dynamic zooming\nNamed views library\nMultiple background-layer support\nSeamless compatibility with WaterCAD and HAMMER\n\n\n#Hydraulics, Operations, and Water Quality\nSteady-state and extended-period simulations\nConstituent-concentration analysis\nMulti-species water quality analysis\nTank-mixing analysis\nWater-age analysis\nWater quality batch run\nCriticality analysis\nFire-flow analysis\nRule-based or logical controls\nVariable-speed pumping, with option to use APEX (Automatic Parameter Estimation eXtension)\nNPSH analysis\nSystem head curves\nLeakage and sprinkler modeling\nWater loss analysis\nPressure-dependent demands\nConventional and unidirectional flushing simulations\nSource tracing\nValve modeling\nAir release valve element\nTop fill tank element\nCombination pump curves\nCarbon emission calculation\nOptimization of pipe renewal with Pipe Renewal Planner\nOverride of pump and valve controls using historical SCADA data\nEmergency response simulations for pipe breaks, power outages, fires, and pipe shutdowns\nReal time modeling\nPressure Zone management\nSupport Districted Metered Areas (DMA) design\n\n\n#Model Building and Data Connection\nDGN, DXF, spreadsheet, database, and ODBC connections\nShapefile, geodatabase*, Geometric Network*, and SDE* connections (*when running from within ArcMap)\nOracle Spatial support\nGIS-ID property to maintain associations between records in the data source / GIS and elements in the model\nSCADAConnect unlimited-signal pack for live data connections (to and from SCADA systems)\nGraphical SCADA element\nCustomer Meter element\nLateral link (no need to split pipes) Automatic demand allocation from geospatial data\nGeospatial demand allocation from customer meters\nDemand allocation from lump-sum geospatial data\nGeospatial-based water consumption projection\nDaily, weekly, monthly, and superimposed patterns\nUnaccounted for water and leakage estimation\nComposite demands global edition\nArea, count, discharge, and population-based loading\nPipe-length-based demand loading\nElevation extraction from DEM, TIN, and shapefiles\nElevation extraction from CAD drawings and surfaces\nSeries, parallel, branch-trimming, multi-criteria automated skeletonization of pipes\nSkeletonization support for isolation valves\nUser-data extension, including formula based\nBing Maps support\nModel sync In/Out, update a model or sync out to an external file\n\n#Model Management\nUnlimited scenarios and alternatives\nComprehensive scenario management\nGlobal attribute tabular edition\nAutomated model skeletonization\nPersonalizable engineering libraries\nSorting and persistent filtering on tabular reports\nStatistical analysis from tabular reports\nDynamic and static selection sets\nLocal and global engineering-units management\nSub-model management\nDrawing review tools for connectivity consistency\nAutomatic topology review\nOrphaned nodes and dead-end pipes queries\nChange tracking\n#Results Presentation\nThematic mapping with property-based color-coding, symbology, and annotations\nDynamic, multi-parameter, and multi-scenario graphing\nScenario and element comparison\nShapefile contouring\nAdvance profiling\nAdvanced tabular reporting with FlexTables\nCreation of Google Earth (KML) files\nPublishing of i-models in 2D or 3D, including to Bentley Map® Mobile\nVideo recording of result animation\nCustomizable reports\n\n#Optimization (using Genetic Algorithm)\nAutomated model calibration with Darwin Calibrator\nIdentify leaks locations with Darwin Calibrator\nOptimized design and rehabilitation with Darwin Designer\nOptimized pump scheduling with Darwin Scheduler\n\n#Energy and Capital-cost Management\nEnergy cost analysis\nCapital cost analysis\nPump and turbine energy analysis", "price": 347805.0, "discountamount": 17000.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "3D", "DXF", "DMA", "DGN", "redo", "APEX", "Local", "fires", "count", "ArcGIS", "HAMMER", "weekly", "option", "records", "formula", "variety", "monthly", "capacity", "elements", "database", "i-models", "velocity", "Creation", "Override", "WaterCAD", "sanitary", "Interface", "splitting", "schematic", "discharge", "symbology", "OpenFlows", "FlexTables", "Rule-based", "Hydraulics", "shapefiles", "Operations", "Aerial view", "Merge nodes", "Description", "pipe breaks", "spreadsheet", "data source", "Steady-state", "flood hazard", "Conventional", "Google Earth", "CAD drawings", "Lateral link", "associations", "alternatives", "review tools", "reconnection", "Optimization", "external file", "power outages", "SCADA systems", "views library", "understanding", "ArcMap license", "valve controls", "Advanced tools", "rehabilitation", "Valve modeling", "pipe shutdowns", "Unlimited undo", "global edition", "Orphaned nodes", "decision risks", "response times", "sewer overflows", "leaks locations", "dynamic zooming", "Video recording", "Change tracking", "Darwin Designer", "AutoCAD license", "surfaces Series", "customer meters", "pump scheduling", "tabular reports", "Thematic mapping", "result animation", "Interoperability", "logical controls", "SDE* connections", "Darwin Scheduler", "inundation times", "isolation valves", "ODBC connections", "SCADA integration", "Darwin Calibrator", "Genetic Algorithm", "Geometric Network", "smarter decisions", "Bing Maps support", "Advance profiling", "Composite demands", "Graphical Editing", "sewer regulations", "model calibration", "Fire-flow analysis", "sprinkler modeling", "leakage estimation", "Water-age analysis", "element comparison", "wastewater systems", "Real time modeling", "Water loss analysis", "regulatory agencies", "best available data", "User-data extension", "surface flood depth", "Bentley Map® Mobile", "Unlimited scenarios", "Energy cost analysis", "Customizable reports", "close proximity tool", "Pipe Renewal Planner", "Shapefile contouring", "persistent filtering", "Criticality analysis", "Elevation extraction", "Tank-mixing analysis", "Sub-model management", "MicroStation license", "Statistical analysis", "model skeletonization", "static selection sets", "historical SCADA data", "combined sewer models", "KML) files Publishing", "Capital cost analysis", "superimposed patterns", "live data connections", "dead-end pipes queries", "Customer Meter element", "Oracle Spatial support", "combined sewer systems", "reliable model results", "hydrology capabilities", "Seamless compatibility", "Variable-speed pumping", "Capital-cost Management", "turbine energy analysis", "multi-scenario graphing", "Graphical SCADA element", "Skeletonization support", "Water quality batch run", "connectivity consistency", "Pressure Zone management", "lump-sum geospatial data", "population-based loading", "Automatic topology review", "Air release valve element", "four compatible platforms", "Pressure-dependent demands", "Automatic element labeling", "Advanced tabular reporting", "Carbon emission calculation", "Automatic demand allocation", "property-based color-coding", "extended-period simulations", "Geospatial demand allocation", "advanced engineering software", "Emergency response simulations", "stormwater management software", "wet-weather calibration methods", "Support Districted Metered Areas", "NPSH analysis System head curves", "Pipe-length-based demand loading", "Global attribute tabular edition", "Comprehensive scenario management", "Multiple background-layer support", "SCADAConnect unlimited-signal pack", "Constituent-concentration analysis", "global engineering-units management", "Multi-species water quality analysis", "Personalizable engineering libraries", "annotations Dynamic, multi-parameter", "hybrid environments Element prototypes", "Automatic Parameter Estimation eXtension", "Top fill tank element Combination pump curves", "unidirectional flushing simulations Source tracing", "Geospatial-based water consumption projection Daily", "new user-friendly 1D/2D hydraulic analysis capability", "SewerGEMS Virtuosity- 1000 Pipes Annual Subscription License", "parallel, branch-trimming, multi-criteria automated skeletonization" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 52, "imageuri": "https://productimages.withfloats.com/actual/64dd123b5fd983000138c92a.jpeg", "tileimageuri": "https://productimages.withfloats.com/tile/64dd123b5fd983000138c92a.jpeg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2023-08-16T17:58:26.748Z", "updatedon": "2024-04-01T12:10:57.129Z", "buyonlinelink": null, "producturl": "http://WWW.ADVEDUCARE.COM/products/openflows-sewergems-virtuosity-1000-pipes-annual-subscription-license/52", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "Bentley", "category": "Bentley Software", "tags": [ "SewerGEMS", "watergems", "Bentley software", "water distribution" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "UniquePaymentUrl", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "64dc84ce9b00660001a66ce4", "fptag": "EDUCAREADV", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "OpenFlows SewerGEMS Virtuosity- Annual Subscription license", "description": "Wastewater and stormwater management software\nAdvanced tools for sanitary and combined sewer models\nSewerGEMS is an easy-to-use advanced engineering software for you to analyze, design, and operate sanitary and combined sewer systems. You can decrease decision risks by ensuring that the model uses the best available data, built-in hydraulic and hydrology capabilities, and a variety of wet-weather calibration methods. Easily create what-if scenarios to gain a better understanding of wastewater systems to make smarter decisions, and you can improve your response times. SCADA integration provides you with reliable model results, improves capacity and limits sewer overflows. This enables you to comply with sewer regulations set by regulatory agencies. Better understand surface flood depth and velocity, flood hazard, and inundation times with the new user-friendly 1D/2D hydraulic analysis capability.\n\n\n#Interoperability, Interface, and Graphical Editing\nRuns from within four compatible platforms:\nStand-alone Windows\nArcGIS (ArcMap license required)\nMicroStation (MicroStation license required)\nAutoCAD (AutoCAD license required)\nUnlimited undo and redo\nElement morphing, splitting, and reconnection\nMerge nodes in close proximity tool\nAutomatic element labeling\nScaled, schematic, and hybrid environments\nElement prototypes\nAerial view and dynamic zooming\nNamed views library\nMultiple background-layer support\nSeamless compatibility with WaterCAD and HAMMER\n\n\n#Hydraulics, Operations, and Water Quality\nSteady-state and extended-period simulations\nConstituent-concentration analysis\nMulti-species water quality analysis\nTank-mixing analysis\nWater-age analysis\nWater quality batch run\nCriticality analysis\nFire-flow analysis\nRule-based or logical controls\nVariable-speed pumping, with option to use APEX (Automatic Parameter Estimation eXtension)\nNPSH analysis\nSystem head curves\nLeakage and sprinkler modeling\nWater loss analysis\nPressure-dependent demands\nConventional and unidirectional flushing simulations\nSource tracing\nValve modeling\nAir release valve element\nTop fill tank element\nCombination pump curves\nCarbon emission calculation\nOptimization of pipe renewal with Pipe Renewal Planner\nOverride of pump and valve controls using historical SCADA data\nEmergency response simulations for pipe breaks, power outages, fires, and pipe shutdowns\nReal time modeling\nPressure Zone management\nSupport Districted Metered Areas (DMA) design\n\n\n#Model Building and Data Connection\nDGN, DXF, spreadsheet, database, and ODBC connections\nShapefile, geodatabase*, Geometric Network*, and SDE* connections (*when running from within ArcMap)\nOracle Spatial support\nGIS-ID property to maintain associations between records in the data source / GIS and elements in the model\nSCADAConnect unlimited-signal pack for live data connections (to and from SCADA systems)\nGraphical SCADA element\nCustomer Meter element\nLateral link (no need to split pipes) Automatic demand allocation from geospatial data\nGeospatial demand allocation from customer meters\nDemand allocation from lump-sum geospatial data\nGeospatial-based water consumption projection\nDaily, weekly, monthly, and superimposed patterns\nUnaccounted for water and leakage estimation\nComposite demands global edition\nArea, count, discharge, and population-based loading\nPipe-length-based demand loading\nElevation extraction from DEM, TIN, and shapefiles\nElevation extraction from CAD drawings and surfaces\nSeries, parallel, branch-trimming, multi-criteria automated skeletonization of pipes\nSkeletonization support for isolation valves\nUser-data extension, including formula based\nBing Maps support\nModel sync In/Out, update a model or sync out to an external file\n\n#Model Management\nUnlimited scenarios and alternatives\nComprehensive scenario management\nGlobal attribute tabular edition\nAutomated model skeletonization\nPersonalizable engineering libraries\nSorting and persistent filtering on tabular reports\nStatistical analysis from tabular reports\nDynamic and static selection sets\nLocal and global engineering-units management\nSub-model management\nDrawing review tools for connectivity consistency\nAutomatic topology review\nOrphaned nodes and dead-end pipes queries\nChange tracking\n#Results Presentation\nThematic mapping with property-based color-coding, symbology, and annotations\nDynamic, multi-parameter, and multi-scenario graphing\nScenario and element comparison\nShapefile contouring\nAdvance profiling\nAdvanced tabular reporting with FlexTables\nCreation of Google Earth (KML) files\nPublishing of i-models in 2D or 3D, including to Bentley Map® Mobile\nVideo recording of result animation\nCustomizable reports\n\n#Optimization (using Genetic Algorithm)\nAutomated model calibration with Darwin Calibrator\nIdentify leaks locations with Darwin Calibrator\nOptimized design and rehabilitation with Darwin Designer\nOptimized pump scheduling with Darwin Scheduler\n\n#Energy and Capital-cost Management\nEnergy cost analysis\nCapital cost analysis\nPump and turbine energy analysis\n", "price": 325051.0, "discountamount": 10000.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "variety", "velocity", "sanitary", "capacity", "scenarios", "flood hazard", "understanding", "decision risks", "response times", "Advanced tools", "sewer overflows", "inundation times", "SCADA integration", "smarter decisions", "sewer regulations", "wastewater systems", "surface flood depth", "regulatory agencies", "best available data", "combined sewer models", "reliable model results", "combined sewer systems", "hydrology capabilities", "advanced engineering software", "stormwater management software", "wet-weather calibration methods", "new user-friendly 1D/2D hydraulic analysis capability", "OpenFlows SewerGEMS Virtuosity- Annual Subscription license" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 39, "imageuri": "https://productimages.withfloats.com/actual/64dd186729b11800012bed03.png", "tileimageuri": "https://productimages.withfloats.com/tile/64dd186729b11800012bed03.png", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2023-08-16T08:11:58.973Z", "updatedon": "2023-08-16T18:41:39.825Z", "buyonlinelink": null, "producturl": "http://WWW.ADVEDUCARE.COM/products/openflows-sewergems-virtuosity-annual-subscription-license/39", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "Bentley", "category": "Bentley Software", "tags": [], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "UniquePaymentUrl", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "64dc83c618b1700001ed943a", "fptag": "EDUCAREADV", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "OpenFlows WaterGEMS Virtuosity-Annual Subscription License", "description": "Water distribution design and analysis software\nAnalyze, design, and optimize your water distribution systems\nA hydraulic modeling application, WaterGEMS provides an easy-to-use environment for you to confidently analyze, design, and optimize your water distribution systems. With advanced interoperability, geospatial model building, optimization, and asset management capabilities, WaterGEMS supports your engineering workflows from fire flow and water quality analysis, to energy consumption and capital cost management. It ranges from 250 Pipes to Unlimited Number of Pipes\n\n#Interoperability, Interface, and Graphical Editing\nRuns from within four compatible platforms:\nStand-alone Windows\nArcGIS (ArcMap license required)\nMicroStation (MicroStation license required)\nAutoCAD (AutoCAD license required)\nUnlimited undo and redo\nElement morphing, splitting, and reconnection\nMerge nodes in close proximity tool\nAutomatic element labeling\nScaled, schematic, and hybrid environments\nElement prototypes\nAerial view and dynamic zooming\nNamed views library\nMultiple background-layer support\nSeamless compatibility with WaterCAD and HAMMER\n\n#Hydraulics, Operations, and Water Quality\nSteady-state and extended-period simulations\nConstituent-concentration analysis\nMulti-species water quality analysis\nTank-mixing analysis\nWater-age analysis\nWater quality batch run\nCriticality analysis\nFire-flow analysis\nRule-based or logical controls\nVariable-speed pumping, with option to use APEX (Automatic Parameter Estimation eXtension)\nNPSH analysis\nSystem head curves\nLeakage and sprinkler modeling\nWater loss analysis\nPressure-dependent demands\nConventional and unidirectional flushing simulations\nSource tracing\nValve modeling\nAir release valve element\nTop fill tank element\nCombination pump curves\nCarbon emission calculation\nOptimization of pipe renewal with Pipe Renewal Planner\nOverride of pump and valve controls using historical SCADA data\nEmergency response simulations for pipe breaks, power outages, fires, and pipe shutdowns\nReal time modeling\nPressure Zone management\nSupport Districted Metered Areas (DMA) design\n\n#Model Building and Data Connection\nDGN, DXF, spreadsheet, database, and ODBC connections\nShapefile, geodatabase*, Geometric Network*, and SDE* connections (*when running from within ArcMap)\nOracle Spatial support\nGIS-ID property to maintain associations between records in the data source / GIS and elements in the model\nSCADAConnect unlimited-signal pack for live data connections (to and from SCADA systems)\nGraphical SCADA element\nCustomer Meter element\nLateral link (no need to split pipes) Automatic demand allocation from geospatial data\nGeospatial demand allocation from customer meters\nDemand allocation from lump-sum geospatial data\nGeospatial-based water consumption projection\nDaily, weekly, monthly, and superimposed patterns\nUnaccounted for water and leakage estimation\nComposite demands global edition\nArea, count, discharge, and population-based loading\nPipe-length-based demand loading\nElevation extraction from DEM, TIN, and shapefiles\nElevation extraction from CAD drawings and surfaces\nSeries, parallel, branch-trimming, multi-criteria automated skeletonization of pipes\nSkeletonization support for isolation valves\nUser-data extension, including formula based\nBing Maps support\nModel sync In/Out, update a model or sync out to an external file\n\n#Model Management\nUnlimited scenarios and alternatives\nComprehensive scenario management\nGlobal attribute tabular edition\nAutomated model skeletonization\nPersonalizable engineering libraries\nSorting and persistent filtering on tabular reports\nStatistical analysis from tabular reports\nDynamic and static selection sets\nLocal and global engineering-units management\nSub-model management\nDrawing review tools for connectivity consistency\nAutomatic topology review\nOrphaned nodes and dead-end pipes queries\nChange tracking\n\n#Results Presentation\nThematic mapping with property-based color-coding, symbology, and annotations\nDynamic, multi-parameter, and multi-scenario graphing\nScenario and element comparison\nShapefile contouring\nAdvance profiling\nAdvanced tabular reporting with FlexTables\nCreation of Google Earth (KML) files\nPublishing of i-models in 2D or 3D, including to Bentley Map® Mobile\nVideo recording of result animation\nCustomizable reports\n\n#Optimization (using Genetic Algorithm)\nAutomated model calibration with Darwin Calibrator\nIdentify leaks locations with Darwin Calibrator\nOptimized design and rehabilitation with Darwin Designer\nOptimized pump scheduling with Darwin Scheduler\n\n#Energy and Capital-cost Management\nEnergy cost analysis\nCapital cost analysis\nPump and turbine energy analysis\n\nWe’ve bundled a 12-month license for trusted Bentley software with customizable training from experts and call it our Virtuoso Subscription. With lower upfront costs and flexible support options, businesses of all sizes can now compete with the industry’s heavy hitters.", "price": 325051.0, "discountamount": 10000.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": null, "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 38, "imageuri": "https://productimages.withfloats.com/actual/64dc83c837d291000135f51f.png", "tileimageuri": "https://productimages.withfloats.com/tile/64dc83c837d291000135f51f.png", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2023-08-16T08:07:34.603Z", "updatedon": "2023-08-16T12:36:35.327Z", "buyonlinelink": null, "producturl": "http://WWW.ADVEDUCARE.COM/products/openflows-watergems-virtuosity-annual-subscription-license/38", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "Bentley", "category": "Bentley Software", "tags": [ "Hydraulic design", "watergems", "water distribution" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "UniquePaymentUrl", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "5b6b3a6d17b6bc0566d8a096", "fptag": "EDUCAREADV", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "SewerGems Perpetual License- 1000 Pipes", "description": "Modeling Software for Sanitary and Combined Sewers\n \nIf building and preparing your sewer models feels like a never-ending task, SewerGEMS software is for you.\n \nSewerGEMS streamlines the modeling process, so that you have more time for solving wastewater engineering problems, such as improving capacity and limiting sewer overflows, which ultimately enable utilities to comply with sewer regulations set by regulatory agencies.\n \nFor more than three decades, SewerGEMS has provided utilities and wastewater professionals like you with advanced engineering tools to plan, design, maintain, and operate sanitary and combined sewer systems, including:\n \nEngineering decision guidance tools: Leverage SewerGEMS’ what-if scenario management tools to gain a better understanding of the behavior of your wastewater system, improving decision making and response time.\nImproved model accuracy: A well calibrated model decreases the risks of making poor decisions by ensuring that the model uses the best available data. SewerGEMS calibration tools such as SCADA integration enable you to rely on your model results.\nIncreased information mobility: SewerGEMS’ full GIS, CAD, and SCADA interoperability enables the cost-effective sharing and flow of information between utilities’ design, engineering, GIS, and operation departments, and their consultants. You can leverage the data that the utility invested in once and reuse across departments.\nSewerGEMS is a superset of SewerCAD.\n \nCAPABILITIES\n \nAllocate and estimate sanitary loads\n \nApply hydrographs, patterned loads, and unit loads using a comprehensive and customizable engineering library. Use the LoadBuilder module to leverage consumption, flow monitoring, land use, or census data in your GIS to automatically estimate and import sanitary loads for your sewer model.\nAllocate and estimate stormwater loads\n \nLoad models with wet weather runoff flows derived from precipitation using the built-in rainfall distributions or user-defined rainfall events. Runoff flows are computed using the most appropriate runoff method for the project.\nAnalyze hydraulics and combined sewer overflows\n \nEasily switch among multiple solvers according to the type of system you are analyzing: Saint Venant equations, convex/gradually varied flow solver (steady-state analysis for extreme flow conditions and extended period simulations), and rational/gradually varied flow solver.\nAnalyze hydrogen sulfide formation\n \nIdentify areas in your network that are at risk of damage from hydrogen sulfide (H2S) formation, which can lead to potential collapses if not addressed. Produce average concentration runs, display result maps of the network, and compare H2S formation according to various conditions such as temperature.\nAnalyze inlet capacities\n \nCalculate the proportion of stormwater runoff that will enter an inlet versus the proportion that will be carried downstream in a gutter or pond on the road surface. Quickly confirm that the spread of flow in a gutter doesn’t exceed design requirements.\nBuild and manage hydraulic models\n \nJumpstart the model-building process and manage your model effectively, so that you can focus on making the best engineering decisions. Leverage and import virtually any external data format, which maximizes ROI on geospatial and engineering data, and automate terrain extraction and node allocation.\nDesign and analyze culverts\n \nSelect from a library of standard culvert shapes, materials, and entrance conditions, then compute culvert headwater and tailwater elevations using calculation methodologies outlined in Hydraulic Design Series Number 5 from the U.S. Federal Highway Administration.\nDesign and analyze low impact development controls\n \nModel the effect that low impact development controls have in retaining runoff before it enters the stormwater system.\nDesign and analyze pond and outlets\n \nLeverage PondMaker’s guiding process through the confusing maze of pond design steps by following the step-by-step process that provides constant feedback on how the design is progressing. Set the maximum outflow rate, estimate storage, and check the outlet design and final design.\nDesign sanitary sewers\n \nMinimize capital investments by simply entering your design restrictions: velocities, slopes, cover depths, and pipe and manhole matching offsets. SewerCAD/SewerGEMS recommends the most cost-effective pipe sizes and invert elevations, avoiding unnecessary pipe trench excavation, while meeting design restrictions.\nDesign stormwater systems\n \nMinimize capital investments by simply entering your design restrictions: velocities, slopes, cover depths, and pipe and inlet matching offsets. The software product recommends the most cost-effective pipe sizes and invert elevations, avoiding unnecessary pipe trench excavation, while meeting design restrictions.\nSimulate water quality\n \nSimulate the generation, inflow, and transportation and treatment of any number of user-defined pollutants, such as total suspended solids or heavy metals.", "price": 892507.0, "discountamount": 10000.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "pond design steps", "design restrictions", "import sanitary loads", "extreme flow conditions", "appropriate runoff method", "scenario management tools", "advanced engineering tools", "SewerGEMS calibration tools", "Produce average concentration", "analyze low impact development", "wastewater engineering problems", "low impact development controls", "customizable engineering library", "Hydraulic Design Series Number 5", "unnecessary pipe trench excavation" ], "isarchived": false, "isavailable": false, "applicationid": null, "productindex": 6, "imageuri": "https://productimages.withfloats.com/actual/5aaa54e0c9e1f50adc6038d1.jpg", "tileimageuri": "https://productimages.withfloats.com/tile/5aaa54e0c9e1f50adc6038d1.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2018-03-15T11:11:29.006Z", "updatedon": "2023-08-16T06:19:19.92Z", "buyonlinelink": null, "producturl": "http://WWW.ADVEDUCARE.COM/products/sewergems-perpetual-license-1000-pipes/6", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "Bentley Systems", "category": "Bentley Software", "tags": [ "openflow", "SewerGEMS" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "UniquePaymentUrl", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "64dd1f369b00660001a67261", "fptag": "EDUCAREADV", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "Bentley OpenFlows WaterGEMS Virtuosity Annual Subscription -Unlimited Pipes", "description": "Description\nDescription\nWaterGEMS is a hydraulic modeling software developed by Bentley Systems, designed for the analysis, design, and optimization of water distribution systems. It helps engineers and water professionals to simulate and analyze the behavior of water distribution networks. Here are some of the key features of WaterGEMS:\n\nHydraulic Analysis: WaterGEMS enables users to perform complex hydraulic analyses of water distribution networks. It models the flow of water, pressure variations, and other hydraulic characteristics throughout the system.\n\nNetwork Modeling: Users can create and manage detailed models of water distribution networks, including pipes, pumps, valves, tanks, reservoirs, and other components.\n\nDemand and Consumption Modeling: The software allows for the simulation of various water demand scenarios, helping to understand how changes in demand patterns impact the network's performance.\n\nLeak Detection and Management: WaterGEMS can assist in identifying and managing leaks within the distribution system by simulating pressure and flow data and comparing it to actual measurements.\n\nWater Quality Analysis: The software offers tools to model water quality aspects within the distribution network, including chlorine decay, contamination propagation, and disinfection processes.\n\nScenario Analysis: Users can evaluate different scenarios and strategies for network improvement, expansion, or maintenance to make informed decisions about system upgrades or changes.\n\nPressure Zone Management: WaterGEMS supports the creation and analysis of pressure zones within the distribution network, helping to optimize pressure levels and reduce energy consumption.\n\nPump Scheduling and Control: The software can optimize pump operation schedules and controls to minimize energy consumption and maintain desired pressure levels.\n\nIntegration with GIS: WaterGEMS can integrate with Geographic Information Systems (GIS) data, allowing users to import and utilize real-world geographical information for more accurate modeling.\n\nGraphical User Interface: The software provides an intuitive graphical interface that allows users to easily create, modify, and visualize their water distribution network models.\n\nReporting and Visualization: WaterGEMS offers tools for generating detailed reports, charts, and graphs to communicate analysis results and findings effectively.\n\nData Exchange: The software supports data exchange with other modeling and analysis tools, facilitating collaboration and integration into larger workflows.\n\nOptimization: Users can use WaterGEMS to optimize various aspects of the water distribution network, such as pipe sizing, pump placement, and valve settings to improve overall system efficiency and performance.\n\nModel Calibration: The software supports calibration of the model with real-world data to improve the accuracy of simulation results and better reflect the behavior of the actual distribution network.\n\nScenario Comparison: WaterGEMS allows users to compare the results of different scenarios side by side, aiding in the evaluation of different strategies and alternatives.\n\nOverall, WaterGEMS is a powerful tool that helps water engineers and professionals manage, analyze, and optimize water distribution systems to ensure efficient and reliable delivery of clean water to communities.", "price": 869773.0, "discountamount": 43500.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "side", "users", "tanks", "leaks", "pumps", "design", "charts", "valves", "graphs", "Control", "changes", "findings", "creation", "accuracy", "behavior", "Reporting", "GIS) data", "expansion", "efficient", "flow data", "evaluation", "reservoirs", "pipe sizing", "Description", "communities", "performance", "maintenance", "Integration", "clean water", "optimization", "key features", "alternatives", "powerful tool", "Visualization", "Data Exchange", "collaboration", "Leak Detection", "pressure zones", "pump placement", "analysis tools", "other modeling", "valve settings", "chlorine decay", "system upgrades", "real-world data", "various aspects", "Bentley Systems", "Pump Scheduling", "detailed models", "demand patterns", "water engineers", "Network Modeling", "other components", "analysis results", "detailed reports", "larger workflows", "Model Calibration", "reliable delivery", "Scenario Analysis", "accurate modeling", "energy consumption", "informed decisions", "simulation results", "Hydraulic Analysis", "actual measurements", "different scenarios", "Scenario Comparison", "water professionals", "pressure variations", "network improvement", "different strategies", "Consumption Modeling", "water quality aspects", "Water Quality Analysis", "disinfection processes", "desired pressure levels", "pump operation schedules", "Pressure Zone Management", "Graphical User Interface", "overall system efficiency", "contamination propagation", "water distribution systems", "complex hydraulic analyses", "actual distribution network", "hydraulic modeling software", "water distribution networks", "intuitive graphical interface", "Geographic Information Systems", "various water demand scenarios", "other hydraulic characteristics", "water distribution network models", "real-world geographical information", "Bentley SoftOpenFlows WaterGEMS Virtuosity Annual Subscription Unlimited Pipes" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 61, "imageuri": "https://productimages.withfloats.com/actual/64dd1f40b8fb930001d066cf.png", "tileimageuri": "https://productimages.withfloats.com/tile/64dd1f40b8fb930001d066cf.png", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2023-08-16T19:10:46.437Z", "updatedon": "2024-04-01T12:01:49.785Z", "buyonlinelink": null, "producturl": "http://WWW.ADVEDUCARE.COM/products/bentley-openflows-watergems-virtuosity-annual-subscription-unlimited-pipes/61", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "Bentley.com", "category": "Bentley Software", "tags": [ "watergems", "water distribution", "Bentley software", "bentley systems" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "UniquePaymentUrl", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false } ], "hasmoreitems": false, "isapirequest": false, "totalresults": 27, "query": null, "floatingpoint": null }