Home> Products> faster technique

{ "products": [ { "_id": "64dcfe3d635f2700010a8435", "fptag": "EDUCAREADV", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "PLAXIS 3D Ultimate Virtuosity Anual Subscription", "description": "PLAXIS 3D Ultimate\nExtend the capabilities of PLAXIS 3D Advanced, to analyze the effects of vibrations in the soil, like earthquakes and moving traffic loads. You can also simulate complex hydrological conditions through time-dependent variations of water levels or flow functions on model boundaries, as well as soil boundaries.\n\nDescription\nPLAXIS 3D Ultimate\nPLAXIS 3D Advanced includes everything that is included in PLAXIS 3D, plus enhances your geotechnical design capabilities with more advanced features and material models. You can consider creep or flow-deformation coupling through consolidation analysis. Additionally, you can solve your problems faster than PLAXIS 3D, by leveraging the multicore solver.\n\nFEATURES COVERED IN PLAXIS 3D Advanced\n\n#PROJECT AND MODEL PROPERTIES\nSelection of imperial and SI units for length, force, etc.\nGEOMETRY CREATION\nCreate Borehole Tool\nSelect, Move, Rotate and Array Tools\nCreate Point, Line, Nurbs Curve and Surface Tools\nPolycurve Designer\nIntersect, Combine, Extrude, Revolve Around Axis, Loft Polycurve and Blend Surfaces Tools\nCreate Point, Line and Surface Load Tools\nCreate Point, Line and Surface Prescribed Displacement Tools\nCreate Embedded Beam, Plate, Geogrid, Fixed-End Anchor, Node-To-Node Anchor, Interface Tools\nCreate Surface Contraction Tool\nCreate Well, Line Drain, Surface Drain and Surface Groundwater Flow Boundary Condition Tools\nCreate Added Mass Tool\nCreate Moving Point and Line Load Tools\nTunnel Designer\nReinforcement (Rockbolts and Umbrella Arches) Definition in the Tunnel Designer\n\nGirder/beam Definition in the Tunnel Designer\n\nTunnel Splitting Tool\n\nDefinition of Excavation Sequence in the Tunnel Designer\n\nAutomatic Generation of Staged Construction Phases for Tunnels\n\n\n#SOIL MATERIAL MODELS\nLinear elastic\nMohr-Coulomb\nHardening Soil\nHardening Soil Small Strain Stiffness\nModified cam-clay\nJointed Rock model\nNGI-ADP\nHoek-Brown, with Parameter guide\nSoft soil\nSoft Soil creep\nSekiguchi Ohta (Viscid)\nSekiguchi Ohta (Inviscid)\nUDCAM-S and Cyclic Accumulation tool\nConcrete\nUser Defined Soil Models\n\nUBC3D-PLM (liquefaction)\n\n#SOIL MATERIAL DRAINAGE TYPES\nDrained\nUndrained A\nUndrained B\nUndrained C\nNon-porous\n\n\n#STRUCTURAL ELEMENT MATERIAL TYPES\nElastic & elastoplastic Plates\nElastic, elastoplastic, elastoplastic (N-Epsilon) & viscoelastic Geogrids\nElastic & elastoplastic Beam\nElastic & elastoplastic Embedded beam\nElastic, elastoplastic & elastoplastic with residual strength Fixed-end and Node-to-node Anchors\n\n\n#DYNAMIC, GROUNDWATER AND THERMAL FLOW MATERIAL PROPERTIES\nGroundwater properties, incl. soil classification systems (Hypres, USDA, etc.) and predefined data sets for (approximate) Van Genuchten models for soil materials\nRayleigh damping for soil and structural elements\n\n#INITIAL CALCULATION TYPES\nK₀ procedure\nGravity loading\nField stress\nGround water flow only\n\n\n#DEFORMATION CALCULATION TYPES\nPlastic\nSafety\nConsolidation\nDynamic\nDynamic with consolidation\nFully coupled flow-deformation\n\n\n#PORE PRESSURE CALCULATION TYPES\nPhreatic level\nUse pore pressures from previous phase\nSteady state groundwater flow\nTransient groundwater flow\n\n\n#MISCELLANEOUS FEATURES, TOOLS AND INTEROPABILITY\nCreate cluster field stress\nStaged construction & automatic regeneration of construction stages\nMulticore and parallel calculation\nPseudostatic analysis\nGenerate Stratigraphy from imported CPT Logs\nSoilTest and parameter optimization tool\nCalculation Manager\nCAD Import (incl. IFC, point clouds, water levels, borehole top and bottom) and Export\nCommand line input (Input, Output & SoilTest)\nCommand line autocomplete (Input, Output & SoilTest)\nCommands runner (Input, Output & SoilTest)\nMacro library and running macros (Input, Output & SoilTest)\nRemote scripting for Input, Output and SoilTest\nScripting reference\nProjectWise integration, loading from and saving to ProjectWise server\nBentley Cloud Services: personal & project portal, project association\nImport of and export to ISM\nPLAXIS 3D Coupling tool for STAAD.Pro\n\n\n#TIME DEPENDENT FUNCTIONS\nTime dependent groundwater flow components for water levels, groundwater flow boundary conditions and soil clusters\nDefinition of groundwater flow functions to specify time dependent changes in head or prescribed discharge, etc.\nDynamic components in x and y direction for point and line loads or displacements\nDefinition of Dynamic multipliers to create vibration and earthquake signals\nScaling tools, Fourier, response spectra & Arias intensity plots and drift correction for input earthquake signals\nDefinition of Movement functions to specify time dependent changes in velocity\nDYNAMIC BOUNDARY CONDITIONS\nViscous\nCompliant base and free field boundaries\nAll nodes fixity\nPOSTPROCESSING & RESULTS\nVarious ways to display forces, displacements, stresses and strains in contour, vector, and iso-surface plots\nTables of results with copy, sorting and filter options\nCurve manager to plot graphs of various results across a selection of calculation phases\nLoad-Displacement curves\nCross-section tools and cross-section curves\nAutomatic and manual centerline extraction for structural forces plots of volumes piles\nResulting forces view\nPlot annotations\nAnimations\nReport generator\nPrinting and saving plots & curves\nPlots & Curves of accelerations, velocities, structural forces envelopes for Dynamic phases\nCurve plots of Pseudo Spectral Acceleration, relative displacements and switching between time & frequency representations\nPlots and curves of pore pressures for phreatic level calculations\nPlots and curves of pore pressures, saturation, suction, and Darcy flux for steady state groundwater flow calculations\nPlots and curves of pore pressures, saturation, suction, and Darcy flux for transient groundwater flow or fully coupled flow deformation calculations\nExport of results to Paraview", "price": 1224935.0, "discountamount": 50000.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": null, "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 48, "imageuri": "https://productimages.withfloats.com/actual/64dcfe3fa673410001642930.jpeg", "tileimageuri": "https://productimages.withfloats.com/tile/64dcfe3fa673410001642930.jpeg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2023-08-16T16:50:05.605Z", "updatedon": "2024-04-01T12:15:17.078Z", "buyonlinelink": null, "producturl": "http://WWW.ADVEDUCARE.COM/products/plaxis-3d-ultimate-virtuosity-anual-subscription/48", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "Bentley", "category": "Bentley Software", "tags": [ "plaxis 2d", "plaxis 3d", "Plaxis Software", "Bentley software", "Geotechnical Software" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "UniquePaymentUrl", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "64dcc9b39b00660001a67036", "fptag": "EDUCAREADV", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "PLAXIS 3D Advanced Virtuosity Anual Subscription ", "description": "PLAXIS 3D Advanced\nPLAXIS 3D Advanced includes everything that is included in PLAXIS 3D, plus enhances your geotechnical design capabilities with more advanced features and material models. You can consider creep or flow-deformation coupling through consolidation analysis. Additionally, you can solve your problems faster than PLAXIS 3D, by leveraging the multicore solver.\n\nFEATURES COVERED IN PLAXIS 3D Advanced\n\n#PROJECT AND MODEL PROPERTIES\nSelection of imperial and SI units for length, force, etc.\nGEOMETRY CREATION\nCreate Borehole Tool\nSelect, Move, Rotate and Array Tools\nCreate Point, Line, Nurbs Curve and Surface Tools\nPolycurve Designer\nIntersect, Combine, Extrude, Revolve Around Axis, Loft Polycurve and Blend Surfaces Tools\nCreate Point, Line and Surface Load Tools\nCreate Point, Line and Surface Prescribed Displacement Tools\nCreate Embedded Beam, Plate, Geogrid, Fixed-End Anchor, Node-To-Node Anchor, Interface Tools\nCreate Surface Contraction Tool\nCreate Well, Line Drain, Surface Drain and Surface Groundwater Flow Boundary Condition Tools\nCreate Added Mass Tool\nCreate Moving Point and Line Load Tools\nTunnel Designer\nReinforcement (Rockbolts and Umbrella Arches) Definition in the Tunnel Designer\n\nGirder/beam Definition in the Tunnel Designer\n\nTunnel Splitting Tool\n\nDefinition of Excavation Sequence in the Tunnel Designer\n\nAutomatic Generation of Staged Construction Phases for Tunnels\n\n\n#SOIL MATERIAL MODELS\nLinear elastic\nMohr-Coulomb\nHardening Soil\nHardening Soil Small Strain Stiffness\nModified cam-clay\nJointed Rock model\nNGI-ADP\nHoek-Brown, with Parameter guide\nSoft soil\nSoft Soil creep\nSekiguchi Ohta (Viscid)\nSekiguchi Ohta (Inviscid)\nUDCAM-S and Cyclic Accumulation tool\nConcrete\nUser Defined Soil Models", "price": 999149.0, "discountamount": 45000.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "Plate", "length", "Viscid", "Combine", "Extrude", "PROJECT", "Tunnels", "Geogrid", "imperial", "problems", "Concrete", "SI units", "Rockbolts", "Intersect", "Selection", "Mass Tool", "Line Drain", "everything", "Node Anchor", "Nurbs Curve", "Array Tools", "Create Point", "Mohr-Coulomb", "Moving Point", "Borehole Tool", "Embedded Beam", "Surface Drain", "Surface Tools", "Sekiguchi Ohta", "Loft Polycurve", "Umbrella Arches", "Soft Soil creep", "Interface Tools", "material models", "Parameter guide", "flow-deformation", "Fixed-End Anchor", "MODEL PROPERTIES", "multicore solver", "advanced features", "GEOMETRY CREATION", "Surface Load Tools", "Polycurve Designer", "NGI-ADP Hoek-Brown", "Excavation Sequence", "Blend Surfaces Tools", "Automatic Generation", "consolidation analysis", "Girder/beam Definition", "Surface Contraction Tool", "Cyclic Accumulation tool", "User Defined Soil Models", "Staged Construction Phases", "cam-clay Jointed Rock model", "geotechnical design capabilities", "Surface Prescribed Displacement Tools", "Tunnel Designer Tunnel Splitting Tool", "Hardening Soil Small Strain Stiffness", "Line Load Tools Tunnel Designer Reinforcement", "PLAXIS 3D Advanced Virtuosity Anual Subscription", "Surface Groundwater Flow Boundary Condition Tools" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 47, "imageuri": "https://productimages.withfloats.com/actual/64dcc9bc5fd983000138bb55.jpeg", "tileimageuri": "https://productimages.withfloats.com/tile/64dcc9bc5fd983000138bb55.jpeg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2023-08-16T13:05:55.539Z", "updatedon": "2024-04-01T12:16:53.077Z", "buyonlinelink": null, "producturl": "http://WWW.ADVEDUCARE.COM/products/plaxis-3d-advanced-virtuosity-anual-subscription-/47", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "Bentley ", "category": "Bentley Software", "tags": [ "plaxis 2d", "plaxis 3d", "Plaxis Software", "Plaxis 3d", "Bentley software", "BENTLEY STAAD PRO" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "UniquePaymentUrl", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "64dcc66c18b1700001ed979a", "fptag": "EDUCAREADV", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "MicroStation Virtuosity Annual Subscription", "description": "MicroStation is the instrument professionals rely on to design, model, and manage infrastructure.\nIt’s more sophisticated than a tool, it’s an accessible instrument that offers power, control, efficiency, and security. It enables users to deliver innovative designs and creative visualizations and consolidates critical project elements in a single environment for effective, secure project deliverables.\n\nWith MicroStation, you can:\n\nModel anything, anywhere with geospatial context\nCreate conceptual and detailed drafting, drawing, and modeling for any industry\nDesign, communicate, and deliver your infrastructure projects in a single platform\n\n\n#Develop better design, faster\nDraft in 2D: Develop precise drawings using a comprehensive set of drafting tools to efficiently create 2D geometry. Rapidly progress your designs from concept to completion using persistent constraints to maintain your design intent.\n\nModel in 3D: Develop models in real context with a wide range of 3D modeling tools. Build and edit curve, surface, mesh, feature, and solids models. Build functional and parametric components with predefined variations to simplify managing and finding many similar components.\n\nDevelop Comprehensive Model Documentation: Present documentation and related design information within the spatial context of the 3D model to significantly improve their clarity. Embed links to related Microsoft Office documents and websites. Easily navigate from content in one file or model to others.\n\nAnalyze and Visualize Models: Analyze and visualize models based on their geometry or attributes. Detect and resolve clashes; perform analysis of real-world solar exposure and shading. Apply real-time display styles to visualize models based on each object’s height, slope, aspect angle, and other embedded properties.\n\nAccelerate Workflows: Speed design tasks and related workflows with intelligent interactive snapping. Improve productivity with the AccuDraw tool for dynamic data entry with heads-up display. Customize and group tools and tasks and reduce keystrokes with keyboard position mapping and the ability to customize cursor menus.\n\nSecure your Data: Ensure that only certain individuals can view and/or edit files. You can ensure the integrity of your documents using digital signatures and control the digital rights to view, edit, print, and copy file contents, including a pre-defined expiration date when the file can be accessed\n\n#Better Inform Teams\nCreate Animations Produce realistic movies and simulations from design, construction, and operational models with the built-in VUE rendering engine. Choose from keyframe and time-based animation. Get the results you want, faster, using live on-screen animation previews and distributed network processing.\n\nCreate Lifelike Renderings Create lifelike visualizations using a built-in VUE Rendering engine. Use online and delivered libraries of physically correct materials, lighting, and rich photorealistic content (RPC). Get results faster with distributed network rendering.\n\nGenerate Intelligent Documentation Generate consistent, high-quality paper and digital deliverables such as paper plots, reports, 2D/3D PDFs, and 3D physical models. Automate and speed annotation, display styles, and reports by generating them directly from the embedded properties of objects. This automates and speeds annotation display styles, and visual reports, and gives you confidence that they will always remain in sync with the model during work in progress.\n\nCreate Your Digital Twin Easily start synchronizing your existing designs with an iModel to take advantage of a Digital Twin. Share the Digital Twin with your project team to see the latest revisions and changes to the project.\n\nReview Designs Collaboratively Work in real-time with your project team members reviewing/tracking/ resolving with the Issue Resolution Service. Identify, assign, and review the progress of revisions and changes for any type of issue that arises in the model.\n\nMaintain and Enforce Standards Ensure the proper application of organizational and project specific standards. Apply templates to control geometry and data standards such as styles for dimensions, text, lines, detail symbols, and more. Once designs are complete, use automated tools to check drawings for standards compliance.\n\n#Freedom to focus on design\nGeospatially Locate Projects Integrate geospatial information from hundreds of supported coordinate systems into your designs. Access data from OGC Web Map Servers, use realtime GPS data, Microsoft Bing maps, and create and reference geospatial PDFs.\n\nIncorporate Common Design Formats Easily read, share, and consume precise data in key industry formats such as Autodesk®’s RealDWG™ (share and consume), IFC (read), Esri SHP (read), and more. Aggregate and assemble multiple file formats including PDF, U3D, 3DS, Rhino 3DM, IGES, Parasolid, ACIS SAT, CGM, STEP AP203/AP214, STL, OBJ, VRMLWorld, SketchUp SKP, and Collada.\n\nIncorporate Referenced Design Content View and work with design information from others in real-time using live referencing of 2D/3D DGN, DWG, and large image files, refreshed on demand. You can even natively reference PDF files into your designs.\n\nIntegrate Point Clouds Easily incorporate a wide range and scale of point-cloud data into the design environment. “Visualize, render, and measure point-cloud data to better understand existing conditions and speed dimensioning and modeling.\n\nIntegrate Raster Imagery Easily incorporate raster imagery of all types, including aerial and satellite imagery, and scanned documents. Choose from dozens of supported file formats including CALS, BMP, TIF, GeoTIFF, JPG, and many more.\n\nIntegrate Reality Meshes Incorporate realistic, photo-textured 3D models or reality meshes into your designs. These highly realistic models can be used directly in the design environment as the basis for your design and construction modeling for faster and better-quality models.\n\nManage Design Changes Track and easily understand changes made to design files, even at the component level, throughout their lifecycle. View, plot, and selectively roll back any individual changes made throughout the history of a file.\n\nWork in a Personalized Environment Confidently work in the right context for each project because the required settings and standards are automatically applied. Take advantage of personalized recommendations to help you get the most from your use of the software.\n\nExtend and Customize Workflows Streamline your workflow and integrate with enterprise systems using a wide range of available tools to customize the user interface. Develop solutions using Microsoft (VBA), .NET, C++, C# as well as user-defined macros.\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\nVIRTUOSO SUBSCRIPTION\nStay nimble and lower costs\n", "price": 108077.0, "discountamount": 5000.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": null, "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 45, "imageuri": "https://productimages.withfloats.com/actual/64dcc66f08869d0001dac4aa.png", "tileimageuri": "https://productimages.withfloats.com/tile/64dcc66f08869d0001dac4aa.png", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2023-08-16T12:51:56.922Z", "updatedon": "2024-04-01T12:14:26.481Z", "buyonlinelink": null, "producturl": "http://WWW.ADVEDUCARE.COM/products/microstation-virtuosity-annual-subscription/45", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "Bentley System", "category": "Bentley Software", "tags": [ "Microstation", "lidar software", "CAD SOFTWARE" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "UniquePaymentUrl", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "60ceeda10f1ecb0001228fcb", "fptag": "EDUCAREADV", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "OpenBridge Designer-Make your Bridge Design Easy!", "description": "THE APPLICATION CONSOLIDATES THE MODELING CAPABILITIES OF OPENBRIDGE MODELER AND THE ANALYSIS AND DESIGN FEATURES OF LEAP BRIDGE CONCRETE, LEAP BRIDGE STEEL, RM BRIDGE, RM BRIDGE ADVANCED AND RM BRIDGE ENTERPRISE TO MEET THE DESIGN AND CONSTRUCTION NEEDS OF ALL TYPES OF BRIDGES. OPENBRIDGE DESIGNER-MAKE YOUR BRIDGE DESIGN EASY!\n\nWith OpenBridge Designer, you have the advantage of using a single comprehensive package from beginning to end of any bridge design project. You can use one product to create an interoperable physical and analytical model for both steel and concrete bridges that can be utilized throughout the lifecycle of the bridge. OpenBridge Designer uses bridge information modelling (BrIM), the advanced methodology for the bridge design and construction industry.\n\n\nWe are pleased to announce the consolidation of Bentley’s bridge software, forming the new OpenBridge Designer CONNECT Edition. The application consolidates the modeling capabilities of OpenBridge Modeler and the analysis and design features of LEAP Bridge Concrete, LEAP Bridge Steel, RM Bridge, RM Bridge Advanced and RM Bridge Enterprise to meet the design and construction needs of all types of bridges.\n\nWith OpenBridge Designer, you have the advantage of using a single comprehensive package from beginning to end of any bridge design project. You can use one product to create an interoperable physical and analytical model for both steel and concrete bridges that can be utilized throughout the lifecycle of the bridge. OpenBridge Designer uses bridge information modelling (BrIM), the advanced methodology for the bridge design and construction industry.\n\n\nCAPABILITIES\n\n\nANALYZE, DESIGN, AND RATE BRIDGES\nStreamline bridge modeling, analysis, and load-rating for both existing and new bridges with an integrated toolset. Leverage various international design code specifications and rating methodologies for verification.\nCAPTURE ROADWAY GEOMETRY AND TOPOGRAPHY\nReuse civil data obtained directly from Bentley road products such as GEOPAK, Bentley InRoads, or MXROAD, and import roadway information and ground data from LandXML files.\nCOORDINATE MULTI-DISCIPLINE BRIDGE TEAMS\nExchange project information including bridge geometry, materials, loads, prestressing strand pattern, and shear reinforcement to improve decision making. Streamline engineering content management with real-time collaboration and share, reuse, and repurpose data throughout the bridge lifecycle to minimize risk of design error and construction issues.\nDESIGN AND ANALYZE CONCRETE BRIDGES\nIntelligently manage your data and streamline the process of modeling, analysis, design code checking, detailed design reports, and automated drawings. Support everyday concrete bridges of all types, including precast and cast-in-place, reinforced, pre-tensioned, and post-tensioned. Support multiple design codes, including US AASHTO LRFD and LFD, Canadian CHBDC, and Indian IRC Working Stress and Limit States Design.\nDESIGN AND ANALYZE STEEL BRIDGES\nModel, design, analyze, and load-rate and optimize steel I-girder and tub-girder bridges using powerful analysis techniques such as Finite Element Modeling (FEM) and Response Spectrum Analysis, according to AASHTO LRFD Bridge Design specifications.\nGENERATE BRIDGE PROJECT DELIVERABLES\nGenerate detailed reports. Create 3D models and 2D drawings for sections, elevations, and framing plans.\nInteroperate with detailing applications\nDevelop detailed rebar designs, including bar marks, schedules, quantities, and drawings by connecting to ProStructures.\nMANAGE BRIDGE PROJECT CHANGES\nRespond to project changes by effortlessly updating the intelligent bridge model and leveraging built-in parametric relationships between bridge components.\nPERFORM BRIDGE CLASH DETECTION\nMitigate risk by performing conflict analysis of the bridge structure with existing infrastructure to save time, eliminate building errors, and reduce project costs. View clashes in 3D or in table format. Detect clashes with reinforcing steel and other embedments. Check for required minimum clearances between adjacent structures and roadways.\nPUBLISH I-MODELS\n​Exchange project models and information using i-models. With i-models, you can implement unique and powerful workflows for information sharing, distribution, and design review. These workflows can be further enhanced using ProjectWise and other products and services that leverage the power of i-models.\nSEQUENCE CONSTRUCTION AND PHASING\nInvestigate the different stages in stage-wise construction – comparing results, detecting the relevant states, and producing result envelopes for proof checking. Account for creep, shrinkage, and relaxation and solve problems before construction begins.\nVISUALIZE BRIDGE DESIGNS\nExperience instantaneous 3D visualization of the bridge superstructure and substructure. Visualize designs and rapidly verify modeling input as you work. View in-profile, elevation, and cross-section views with solid and transparent view options to help explore areas with complex geometry.", "price": 1037167.0, "discountamount": 103717.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": null, "isarchived": false, "isavailable": false, "applicationid": null, "productindex": 33, "imageuri": "https://productimages.withfloats.com/actual/60ceeda349b34500012df7b4.jpg", "tileimageuri": "https://productimages.withfloats.com/tile/60ceeda349b34500012df7b4.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2021-06-20T07:26:25.512Z", "updatedon": "2023-04-12T07:05:58.3Z", "buyonlinelink": null, "producturl": "http://WWW.ADVEDUCARE.COM/products/openbridge-designer-make-your-bridge-design-easy-/33", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "Bentley Systems", "category": "Bentley Software", "tags": [ "Open Bridge Designer", "OpenBridge", "Bentley system" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "None", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "60ceec31f83dd80001112cbf", "fptag": "EDUCAREADV", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "STAAD Foundation Advanced- A powerful Foundation Design Software", "description": "COMPREHENSIVE FOUNDATION DESIGN SOFTWARE\nFoundation Advanced provides you with a streamlined workflow through its integration with STAAD.Pro or as a stand-alone application for any type of foundation.\nGet efficient foundation design and documentation using plant-specific design tools, multiple design codes with U.S. and metric bar sizes, design optimization, and automatic drawing generation. STAAD Foundation Advanced provides you with a streamlined workflow through its integration with STAAD.Pro or as a stand-alone application. You can design virtually any type of foundation, from basic to the most complex. \nEasily model complex or simple footings, such as plant foundations supporting vertical vessels, horizontal vessels, tanks and other footings\nQuickly model common foundations such as isolated, combined, strip, pile caps, and many more \nSimplify challenging scenarios such as vibrating machine foundation, lateral analysis of piers, or mat design using FEA\nEfficiently use your structural model with the foundation model through integration with STAAD.Pro, including automatically synced changes in both models\n\nCAPABILITIES\n\n\nANALYZE GRAVITY AND LATERAL LOAD\nDesign and analyze simple or complex structures for a wide range of loading conditions, including conditions induced by gravity like dead and live loads, such as skip conditions and tilt-up walls, in combination with lateral loads like wind and seismic.\n\nANALYZE MACHINE VIBRATION AND SETTLEMENT\nAnalyze machine block foundation for dynamic loading. Leverage wizard-based input for faster FEA solids model creation, including rotating and reciprocating machines, various loading, and soil spring options. Perform in-depth analysis review using dynamic graphs and detailed formulae in reports.\n \nANALYZE STEADY STATE DYNAMIC PERFORMANCE\nIncrease performance up to 2,000 times faster with STAAD’s advanced stiffness matrix solving application. Tackle large geometric models with multiple load cases without compromising analysis quality. Achieve top-notch performance for dynamic analysis.\n\nCALCULATE PUNCHING SHEAR\nCalculate and design concrete slab/column connections for punching shear, including the effects of unbalanced joint moments.\n\nCOMPLY WITH SEISMIC REQUIREMENTS\nDesign and detail seismic force-resisting systems, generating seismic loads according to the relevant building code. Consider these forces in the design of elements and, where applicable, the design of frames and the larger structural system. Enforce the ductility requirements of the selected design code in element proportioning and detailing.\n\nDESIGN FOUNDATIONS TO INTERNATIONAL STANDARDS\nDesign a wide variety of foundations, from simple spread footings to complicated mats and specialized machinery pads. Complete your designs with confidence thanks to extensive support of international standards.\n\nDETAIL AND SCHEDULE CONCRETE REINFORCING\nProduce rebar placing drawings, including sections, plans, details, bar bending schedules, material take-offs and beam/column/footing schedules, all based on the 3D model. All schedules and drawings can be customized to adhere to your company’s standards for concrete projects.\n\nGENERATE DESIGN LOADS AND LOAD COMBINATIONS\nApply code-prescribed wind and seismic loads to the structure using built-in load generators. Calculate relevant loading parameters automatically based on the structural geometry, mass, and selected building code provisions without the need for separate hand calculations. Combine these lateral load cases with gravity and other types of loads using load combination generators.\n\nPRODUCE STRUCTURAL DESIGN DOCUMENTATION\nGenerate structural design documents including necessary plans and elevations that are used to convey the design intent. Changes made to the 3D model are automatically updated in the documentation.\nProduce structural details\nProduce detailed 2D drawings directly from design results established in the structural model. Customize the style and format of the drawings using settings offered within the software.", "price": 150077.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": null, "isarchived": false, "isavailable": false, "applicationid": null, "productindex": 32, "imageuri": "https://productimages.withfloats.com/actual/60ceec36a203ce0001cb6ea7.png", "tileimageuri": "https://productimages.withfloats.com/tile/60ceec36a203ce0001cb6ea7.png", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2021-06-20T07:20:17.951Z", "updatedon": "2023-04-12T08:00:14.599Z", "buyonlinelink": null, "producturl": "http://WWW.ADVEDUCARE.COM/products/staad-foundation-advanced-a-powerful-foundation-design-software/32", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "Bentley Systems", "category": "Bentley Software", "tags": [ "staad.pro", "STAAD FOUNDATION ADVANCED", "STRUCTURAL DESIGN SOFTWARE" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "None", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "60ce23098b30250001357faa", "fptag": "EDUCAREADV", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "STAAD.Pro Connect Edition ( Basic)-Perpetual License", "description": "Perform comprehensive analysis and design for any size or type of structure faster than ever before using the new STAAD.Pro CONNECT Edition. Simplify your BIM workflow by using a physical model in STAAD.Pro that is automatically converted into the analytical model for your structural analysis. Share synchronized models with confidence for multi-discipline team collaboration and, most importantly, deliver safe, cost-effective designs. STAAD - Powerful Structural Analysis and Design Software!\n\nBecause every firm has different needs, there are three flexible STAAD.Pro options:\n\n\n\n1. STAAD.Pro – The most basic STAAD option including FEM analysis and physical modeling.\n\n2. STAAD.Pro Advanced – Adds faster, more advanced and complex analysis.\n\n3. Structural WorkSuite – The most popular structural applications in a single a cost-effective license.\nCAPABILITIES\nANALYZE GRAVITY AND LATERAL LOAD\nDesign and analyze simple or complex structures for a wide range of loading conditions, including conditions induced by gravity like dead and live loads, such as skip conditions and tilt-up walls, in combination with lateral loads like wind and seismic.\n\nCOMPLY WITH SEISMIC REQUIREMENTS\nDesign and detail seismic force-resisting systems, generating seismic loads according to the relevant building code. Consider these forces in the design of elements and, where applicable, the design of frames and the larger structural system. Enforce the ductility requirements of the selected design code in element proportioning and detailing.\n\nDESIGN AND ANALYZE STRUCTURAL MODELS\nQuickly model your entire structure, including decks, slabs, slab edges and openings, beams, columns, walls, braces, spread and continuous footings, and pile caps. Efficiently automate many of your time-consuming design and analysis tasks and produce practical system and component designs that are document ready.\n\nDESIGN AND ANALYZE WITH FINITE ELEMENTS\nComplete building analysis, design, and drafting for the entire structure accurately and efficiently using our state-of-the-art finite element analysis. Reduce or eliminate the time spent waiting for results using our fast solvers.\n\nDESIGN BEAMS, COLUMNS AND WALLS\nOptimize or analyze beams, columns, and walls for gravity and lateral loads to quickly obtain safe and economical designs. Confidently produce designs in compliance with global design specifications and building codes.\n\nDESIGN COLD-FORMED STEEL MEMBERS\nDesign light gauge steel members using a comprehensive cold-formed sections library without needing to use a separate special-purpose application.\n\nDESIGN LATERAL RESISTING FRAMES\nPerform extensive building-code checks for seismic and wind forces on braced frames and moment frames. Quickly obtain safe and reliable designs for all of your structural projects.\n\nDESIGN TO INTERNATIONAL STANDARDS\nExtend the reach of your business practice and take advantage of global design opportunities by using a wide range of international standards and specifications in our design products. Complete your designs with confidence thanks to extensive support of international standards.\n\nGENERATE DESIGN LOADS AND LOAD COMBINATIONS\nApply code-prescribed wind and seismic loads to the structure using built-in load generators. Calculate relevant loading parameters automatically based on the structural geometry, mass, and selected building code provisions without the need for separate hand calculations. Combine these lateral load cases with gravity and other types of loads using load combination generators.\n\nIMPORT SECTION SHAPES CREATED IN DXF\nQuickly import metric or imperial custom-defined section profiles detailed in DXF drawings. Alternatively define regular shapes with simple key dimensions or pick from a range of standard libraries.\n\nINTEGRATE SLAB AND FOUNDATION DESIGNS\nDesign slabs and foundations using specialized applications that are integrated within the master analysis model. Create design calculations and reinforcing drawings. Add the design information in BIM models by using ISM.\n\nINTEGRATE STEEL CONNECTION DESIGNS\nDesign structural steel connections within a single integrated environment. Transfer joint geometry, member sizes, and joint forces from the 3D analysis directly to the steel connection design application. This allows for efficient reuse of information and reduces the amount of rework required when the structure changes.\n\nPRODUCE SECTION PROPERTY REPORTS\nQuickly calculate section properties and easily produce detailed reports on your custom section profiles.\n\nPRODUCE STRUCTURAL DESIGN DOCUMENTATION\nGenerate structural design documents including necessary plans and elevations that are used to convey the design intent. Changes made to the 3D model are automatically updated in the documentation.\n\nSHARE STRUCTURAL MODELS\nTransfer structural model geometry and design results from one application to another and synchronize changes over time. Quickly share the structural model, drawings, and information with the entire team for review.\n\nUTILIZE INTERNATIONAL SECTION PROFILES\nComplete your structural model using a vast array of international section profile databases, which are included at no extra charge. Take advantage of global design opportunities around the world.", "price": 200345.0, "discountamount": 5345.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": null, "isarchived": false, "isavailable": false, "applicationid": null, "productindex": 25, "imageuri": "https://productimages.withfloats.com/actual/60ce230a3c43ca0001f62a26.jpeg", "tileimageuri": "https://productimages.withfloats.com/tile/60ce230a3c43ca0001f62a26.jpeg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2021-06-19T17:02:01.805Z", "updatedon": "2023-08-16T07:44:37.694Z", "buyonlinelink": null, "producturl": "http://WWW.ADVEDUCARE.COM/products/staad-pro-connect-edition-basic-perpetual-license/25", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "Bentley Systems", "category": "Bentley Software", "tags": [ "STAAD PRO", "Structural design", "SEL", "Bnetley Systems" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "None", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "60ce16598cf4610001575e3c", "fptag": "EDUCAREADV", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "Bentley ContextCapture Software", "description": "CREATE 3D MODELS FROM SIMPLE PHOTOGRAPHS AND/OR POINT CLOUDS\n\nBentley ContextCapture can quickly produce most challenging 3D models of existing conditions for infrastructure projects. \nYou can use simple photographs or point clouds data for any projects. \nMoreover hybrid processing in ContextCapture enables the creation of engineering-ready reality meshes that incorporate the best of both worlds. The high-resolution photography supplemented, where needed, by additional accuracy of point clouds from laser scanning.\nExtend your capabilities to extract value from reality modeling data with ContextCapture Editor. The editor is a 3D CAD module for editing and analyzing reality data, included with ContextCapture.\n\nCAPABILITIES\n\n\nCONSUME IMAGERY FROM MANY CAMERAS AND SENSOR TYPES\nUtilize a wide variety of cameras, from smartphones to highly-specialized airborne or terrestrial multidirectional acquisition systems. Take advantage of any available image format and metadata to create 3D models.\n\nCONSUME LASERSCAN DATA\nImport static or mobile laserscan data. Combine it with photos to get very high accuracy reality meshes.\n\nCREATE ANIMATIONS, VIDEOS, AND FLY-THROUGHS\nProduce high-resolution orthographic and perspective images by rendering snapshots of any size. Set image size and scales using output rulers, scale, and positioning for accurate reuse. Take advantage of the intuitive time-based fly-through and object animation system for quick and easy movie production.\n\nCREATE HIGH-FIDELITY IMAGES\nUse high-fidelity imaging tools to support precision mapping and engineering. Combine imagery in virtually any format and projection.\n\nCREATE SCALABLE TERRAIN MODELS\nUse and display very large terrain models to increase return on investment on large datasets. Display scalable terrain models in a variety of modes, such as smooth shading with shadows, aspect angle, elevation, slope, contours, and more. Synchronize terrain models with source data such as DGN files, point-cloud data, and more.\n\nEMPLOY PARALLEL COMPUTING POWER\nDramatically reduce processing time with the ability to run two ContextCapture instances in parallel on a single project.\n\nGENERATE 2D AND 3D GIS MODELS\nProduce accurate georeferenced 3D models using a full range of geospatial data types including true orthophotos, point clouds, raster digital elevation models and Esri I3S format. Includes an SRS database interface to ensure interoperability with your GIS solution of choice.\n\nINTEGRATE DATA FROM MANY SOURCES WITH REALITY MESHES\nEnrich reality meshes with additional data like geospatial information, by attaching it to specific parts of the mesh, providing the ability to subsequently search and visualize regions of a mesh based on the associated data.\n\nINTEGRATE POSITIONING DATA\nLeverage ground control points or GPS tags to precisely georeference models. This enables you to geocoordinate your project and accurately measure coordinates, distances, areas, and volumes.\n\nMEASURE AND ANALYZE MODEL DATA\nSave time getting accurate answers by performing precise measurements of distances, volumes, and surface areas directly within the 3D viewing interface.\n\nMODEL GEOMETRY FROM REALITY MODELING DATA\nExtract break lines, paint lines, surfaces, planes, cylinder, and cylinder center lines from reality models. Efficiently clip and section point cloud and reality meshes to streamline vector extraction.​\n\nPERFORM AUTOMATIC AEROTRIANGULATION AND 3D RECONSTRUCTION\nFully calibrate all images by automatically identifying the relative position and orientation of each photo. Employ automatic 3D reconstruction, texture mapping, and retexturing of ties and reconstruction constraints to ensure highly accurate models.\n\nPERFORM AUTOMATIC PHOTO BLOCK ALIGNMENT ON POINT CLOUDS\nDuring aerotriangulation process, automatically adjust the photo block to fit point clouds, resulting in precise calibration and alignment of the two data sources to create a high-fidelity reality mesh.\n\nPERFORM SIMULTANEOUS NAVIGATION AND VIEWING IN 2D IMAGES AND A 3D REALITY MESH\nTake advantage of photo navigation to analyze and perform quality assessment by clicking a point in the reality mesh to display full resolution photos and the synchronized 3D scene.\n\nPUBLISH AND VIEW WEB-READY MODELS\nProduce models of any size that are optimized for Web publishing and that can be viewed using a free plugin Web viewer. This enables instant sharing and visualization of 3D models on the Web.\n\nSCALABLE PRODUCTION SPEEDS WITH CLOUD ON-DEMAND\nMeet your most demanding deadlines with multi-engine cloud processing by switching to ContextCapture Cloud Processing Service directly from your ContextCapture desktop interface.\n\nVISUALIZE, ANALYZE, AND MEASURE REALITY MESHES PRIOR TO FINAL PRODUCTION\nTake advantage of the Splat display mode after aerotriangulation to view a draft of the reality mesh for faster insight to perform quality assessment, photo navigation, and measurement tasks.\n\nVISUALIZE, MANIPULATE AND EDIT REALITY MODELING DATA\nVisualize and edit point clouds with billions of points, changing their classification, color and removing or editing points. Manipulate reality meshes and scalable terrain models with hundreds of millions of triangles. Import, retouch, and export meshes in many formats.\nfurthermore may find more info by clicking the Link\nhttps://buystaad.in/p/2021/05/09/contextcapture/\n\n\n\n\n", "price": 327339.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": null, "isarchived": false, "isavailable": false, "applicationid": null, "productindex": 24, "imageuri": "https://productimages.withfloats.com/actual/60ce17f894a79600014ace2f.jpg", "tileimageuri": "https://productimages.withfloats.com/tile/60ce17f894a79600014ace2f.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2021-06-19T16:07:53.816Z", "updatedon": "2023-08-16T07:45:53.548Z", "buyonlinelink": null, "producturl": "http://WWW.ADVEDUCARE.COM/products/bentley-contextcapture-software/24", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "Bentley Systems", "category": "Bentley Software", "tags": [], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "None", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "60cdb6a38cf461000157593f", "fptag": "EDUCAREADV", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "BricsCAD Lite ( 2D) Perpetual License ", "description": "Familiar CAD\nLeverage what you already know with full command, script, macro and menu compatibility with the industry-standard CAD program. BricsCAD feels like home!\n\nBricsCAD Lite is highly compatible with AutoCAD® LT 2022\nThere’s no need to change your printers, templates, blocks or sheet set layouts to move to BricsCAD – they are 100% compatible. Command names, aliases, and system variables are the same in BricsCAD and AutoCAD®. BricsCAD is based on native DWG for the highest compatibility with other CAD users across all industries.\n\nCommand compatible\n\nMenu (.CUI, .CUIX) compatible\n\nMacro/script compatible\n\nSupport file (.PC3, .LIN, .PAT, .DWT, .SSM) compatible\n\nBased on latest DWG technology\n\n\nLISP Routines\nYou can run LISP routines developed in AutoCAD® and other CAD applications, and develop your own in the BricsCAD LISP Advanced Development Environment (BLADE). BricsCAD is based on OpenLISP, with modern memory management and great performance.\n\nWhy use Lisp?\nLisp routines are the easiest way to automate processes and workflows for bulk layer manipulations, changing entity properties, automate drawing and XREF relationships, standardize plotting and publishing workflows, etc.\n\nDynamic-Blocks\nUse your AutoCAD® Dynamic Blocks in BricsCAD\nYou can use the Dynamic Blocks that you created in AutoCAD® directly inside of BricsCAD. Control visibility states and stretch, flip, and rotate just as you would in AutoCAD®.\n\nEfficient CAD\nBricsCAD offers unique tools to help you get more work done faster. Many of them are powered by advanced machine learning technologies to accelerate tasks that can take hours or more via manual methods.", "price": 29500.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": null, "isarchived": false, "isavailable": false, "applicationid": null, "productindex": 22, "imageuri": "https://productimages.withfloats.com/actual/62cd350d87622a000152bade.png", "tileimageuri": "https://productimages.withfloats.com/tile/62cd350d87622a000152bade.png", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2021-06-19T09:19:31.796Z", "updatedon": "2022-07-12T08:47:02.446Z", "buyonlinelink": null, "producturl": "http://WWW.ADVEDUCARE.COM/products/bricscad-lite-2d-perpetual-license-/22", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "Bricsys ", "category": "BricsCAD Software", "tags": [ "AutoCAD", "BricsCAD", "2d Drafting Software" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "UniquePaymentUrl", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "5c37324fcab9a8000140e6ae", "fptag": "EDUCAREADV", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "OpenBuildings Designer- Building Information Modelling Make Easy.", "description": "MULTIDISCIPLINE BUILDING DESIGN SOFTWARE\n\nOpenBuildings Designer- Building Information Modelling Make Easy. Effectively communicate design intent and bridge barriers between building disciplines and geographically distributed teams. \n\nOpenBuildings Designer (formerly AECOsim Building Designer) provides building information modeling (BIM) advancements so you can deliver buildings faster and with greater confidence – \n\n\n\nInteroperability: Integrate information you have from multiple formats and easily work on projects of any size \nInformation-rich deliverables: Clearly communicate your design intent with reliable deliverables that you can easily customize \nUnrestrictive design environment: Model anything with total freedom from buildings with simple to highly complex geometry and designs\nBuilding performance: Simulate buildings and predict real-world performance of the asset quickly and with precision to explore various options for iterative refinement\nDesign, analyze, document, and visualize buildings of any size, form, and complexity. Effectively communicate design intent and bridge barriers between building disciplines and geographically distributed teams. OpenBuildings Designer (formerly AECOsim Building Designer) provides building information modeling (BIM) advancements so you can deliver buildings faster and with greater confidence – confidence in your design, workflow, capabilities, and deliverables. \n\nCAPABILITIES\n\n\nANALYZE BUILDING SYSTEM PERFORMANCE\nSimulate real-world performance and evaluate building system performances so you can quickly discover the best design choices. Inform early design decisions with conceptual energy analysis that provides peak loads, annual energy calculations, energy consumptions, carbon emissions, and fuel costs.\n\nCOLLABORATE ACROSS MULTI-DISCIPLINE TEAMS\nIncludes capabilities for architectural, electrical, mechanical, and structural systems design in one application. Coordinate your designs better thanks to a common design environment and a streamlined workflow. Resolve clashes with built-in clash detection and share mark-ups of models and documentation across teams to reduce project errors.\n\nDESIGN BUILDINGS AND FACILITIES\nDevelop and design buildings and facilities of any size and complexity with comprehensive architectural tools. Produce coordinated architectural documentation directly from the building model. Create floor plans, sections, elevations, and schedules for any architectural component.\n\nDESIGN BUILDING STRUCTURES\nModel steel, concrete, and timber structures from walls, foundations, and columns to other structural components. Produce plans, framing layouts, sections, and elevations. Integrate with detailing applications including Bentley's ProStructures.\n\nDESIGN MEP SYSTEMS\nDesign complex mechanical, electrical, and plumbing (MEP) systems. Model fully parametric air-handling, piping, and plumbing systems. Design lighting, power, fire-detection, and other electrical subsystems.\n\nGENERATE BUILDING DOCUMENTATION AND REPORTS\nProduce high-quality and reliable documents directly from your intelligent building model. Ensure that drawings are up to date and accurately represent your design by publishing design model views. Link specifications, engineering calculations, and equipment documentation to models and drawings to support building operations.\n\nREFINE DESIGN ALTERNATIVES\nIterate designs quickly by dynamically modeling or manipulating geometry. Discover more possibilities and explore a broad range of \"what-if\" alternatives in less time. Design with freedom and model anything of any form, size, and complexity without restrictions and limitations.\n\nVISUALIZE BUILDING DESIGNS\nProduce visualizations of models and further refine potential designs. Generate images and animations with life-like detail and high-end photo-realistic renderings with no need for additional software.", "price": 380000.0, "discountamount": 5000.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": null, "isarchived": false, "isavailable": false, "applicationid": null, "productindex": 20, "imageuri": "https://productimages.withfloats.com/actual/60ce1bf5f44ada000174b037.jpeg", "tileimageuri": "https://productimages.withfloats.com/tile/60ce1bf5f44ada000174b037.jpeg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2019-01-10T11:53:51.002Z", "updatedon": "2021-06-19T16:31:45.187Z", "buyonlinelink": null, "producturl": "http://WWW.ADVEDUCARE.COM//openbuildings-designer-building-information-modelling-make-easy-/20", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "Bentley Systems", "category": "Bentley Software", "tags": [ "POWER RAIL TRACK", "BENTLEY", "MXROAD", "STAAD PRO", "OPENRAIL", "OPENROAD", "OPENRAIL DESIGNER", "MXRAIL", "RAIL TRACK", "RAIL TRACK SOFTWARE", "BENTLEY MXRAIL", "RAIL ALIGNMENT SOFTWARE", "DESIGN ANA ANALYSIS SOFTWARE", "OpenBuilding" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "UniquePaymentUrl", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false } ], "hasmoreitems": false, "isapirequest": false, "totalresults": 27, "query": null, "floatingpoint": null }