Home> Products> documentation center

{ "products": [ { "_id": "64dd05287191e90001251afb", "fptag": "EDUCAREADV", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "PLAXIS 2D Ultimate Virtuosity Annual Subscription", "description": "Description\nPLAXIS 2D- (Complete Features ) Check For individual features from site\nPLAXIS 2D includes all the essential functionalities to perform everyday deformation and safety analysis for soil and rock that do not require the consideration of creep, steady state groundwater or thermal flow, consolidation analysis, or any time-dependent effects.\n\nFeatures PLAXIS 2D, PLAXIS 2D Advanced & Ultimate \n \n\n#PROJECT AND MODEL PROPERTIES\nSelection of imperial and SI units for length, force, etc.\nSelect between plane strain and axi-symmetric models\nSelect between 6-noded and 15-noded element types\nConstants tab in Project properties\n\n\n#GEOMETRY CREATION\nCreate Borehole Tool\nSelect, Move and Array Tools\nCreate Soil Polygon, Soil Rectangle Tools\nCreate Point & Line Load Tools\nCreate Point & Line Prescribed Displacement Tools\nCreate Embedded Beam Row, Plate, Geogrid, Fixed-End Anchor, Node-to-node Anchor, Interface Tools\nCreate Line Contraction Tool\nCreate Well, Drain and Groundwater Flow Boundary Conditions Tools\nCreate Thermal Flow Boundary Condition Tool\nCreate Added Mass Tool\nTunnel Designer\nReinforcement (Rockbolts) Definition in Tunnel Designer\n\n\n#SOIL MATERIAL MODELS\nLinear elastic\nMohr-Coulomb\nHardening Soil\nHardening Soil Small Strain Stiffness\nModified cam-clay\nJointed Rock model\nNGI-ADP\nHoek-Brown, with Parameter guide\nSoft soil\nSoft Soil creep\nSekiguchi Ohta (Viscid)\nSekiguchi Ohta (Inviscid)\nUDCAM-S and Cyclic Accumulation tool\nConcrete\nUser Defined Soil Models\nUBC3D-PLM (liquefaction)\n\n\n#SOIL MATERIAL DRAINAGE TYPES\nDrained\nUndrained A\nUndrained B\nUndrained C\nNon-porous\n\n\n#STRUCTURAL ELEMENT MATERIAL TYPES\nElastic, elastoplastic & elastoplastic (M-Kappa) Plates\nElastic, elastoplastic, elastoplastic (N-Epsilon) & viscoelastic Geogrids\nElastic, elastoplastic & elastoplastic (M-Kappa) Embedded beam rows\nElastic, elastoplastic & elastoplastic with residual strength Fixed-end and Node-to-node Anchors\n\n#DYNAMIC, GROUNDWATER AND THERMAL FLOW MATERIAL PROPERTIES\nGroundwater properties, incl. soil classification systems (Hypres, USDA etc) and predefined data sets for (Approximate) Van Genuchten models for soil materials\nThermal properties for soil and structural elements (excl. embedded beam row)\nRayleigh damping for soil and structural elements\n\n\n#INITIAL CALCULATION TYPES\nK₀ procedure\nGravity loading\nField stress\nGround water flow only\n\n#DEFORMATION CALCULATION TYPES\nPlastic\nSafety\nConsolidation\nDynamic\nDynamic with consolidation\nFully coupled flow-deformation\n\n#PORE PRESSURE CALCULATION TYPES\nPhreatic level\nUse pore pressures from previous phase\nSteady state groundwater flow\nTransient groundwater flow\n\n#THERMAL CALCULATION TYPES\nIgnore temperature\nEarth gradient\nSteady state thermal flow\nUse temperatures from previous phase\nTransient thermal flow\n\n#MISCELLANEOUS FEATURES, TOOLS AND INTEROPABILITY\nSpatial variation of preconsolidation\nTunnel deconfinement\nCreate cluster field stress\nStaged construction & automatic regeneration of construction stages\nMulticore and parallel calculation\nDesign Approaches\nPseudostatic analysis\nGenerate Stratigraphy from imported CPT Logs\nSoilTest and parameter optimization tool\nSensitivity analysis and Parameter variation\nPLAXIS 2D Classic to PLAXIS 2D CONNECT Edition project converter\nPLAXIS 2D LE model import\nPLAXIS 2D to 3D Converter\nCalculation Manager\nCAD Import and Export\nCommand line input (Input, Output & SoilTest)\nCommand line autocomplete (Input, Output & SoilTest)\nCommands runner (Input, Output & SoilTest)\nMacro library and running macros (Input, Output & SoilTest)\nRemote scripting for Input, Output and SoilTest\nScripting reference\n1D Site response analysis tool\nProjectWise integration, loading from and saving to ProjectWise server\nBentley Cloud Services: personal & project portal, project association\n\n\n#TIME DEPENDENT FUNCTIONS\nTime dependent groundwater flow components for water levels, groundwater flow boundary conditions and soil clusters\nDefinition of groundwater flow functions to specify time dependent changes in head or discharge, etc.\nTime dependent thermal components for thermal flow boundary conditions and soil clusters\nDefinition of thermal flow functions to specify time dependent changes in temperature or heat flux, etc.\nDynamic components in x and y direction for point and line loads or prescribed displacements\nDefinition of Dynamic multipliers to create vibration and earthquake signals\nScaling tools, Fourier, response spectra & Arias intensity plots and drift correction for input earthquake signals\n\n#DYNAMIC BOUNDARY CONDITIONS\nViscous\nTied degrees of freedom\nCompliant base and free field boundaries\nAll nodes fixity\n\n#POSTPROCESSING & RESULTS\nVarious ways to display forces, displacements, stresses and strains in contour, vector, and iso-surface plots\nTables of results with copy, sorting and filter options\nCurve manager to plot graphs of various results across a selection of calculation phases\nLoad-Displacement curves\nCross-section tools and cross-section curves\nAutomatic and manual centerline extraction for structural forces plots of volume plates\nResulting forces view\nPlot annotations\nAnimations\nReport generator\nPrinting and saving plots & curves\nPlots & Curves of accelerations, velocities, structural forces envelopes for Dynamic phases\nCurve plots of Pseudo Spectral Acceleration, relative displacements and switching between time & frequency representations\nPlots and curves of pore pressures for phreatic level calculations\nPlots and curves of pore pressures, saturation, suction, and Darcy flux for steady state groundwater flow calculations\nPlots and curves of pore pressures, saturation, suction, and Darcy flux for transient groundwater flow or fully coupled flow deformation calculations\nPlots and curves of temperature, ice saturation and heat flux for steady state thermal flow calculations\nPlots and curves of temperature, ice saturation and heat flux for transient thermal flow or full thermo-hydro-mechanical coupled calculations\nExport of results to Paraview", "price": 506686.0, "discountamount": 25000.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": null, "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 51, "imageuri": "https://productimages.withfloats.com/actual/64dd052a5b2f8700019e19e4.png", "tileimageuri": "https://productimages.withfloats.com/tile/64dd052a5b2f8700019e19e4.png", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2023-08-16T17:19:36.337Z", "updatedon": "2024-04-01T12:12:00.117Z", "buyonlinelink": null, "producturl": "http://WWW.ADVEDUCARE.COM/products/plaxis-2d-ultimate-virtuosity-annual-subscription/51", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "Bentley", "category": "Bentley Software", "tags": [ "plaxis 2d", "Plaxis 3d", "Plaxis Software", "Geotechnical Software", "Bentley software", "BENTLEY STAAD PRO", "bentley systems" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "UniquePaymentUrl", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "64dd042630ccad00013c8c7e", "fptag": "EDUCAREADV", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "Bentley PLAXIS 2D Advanced Virtuosity Annual Subscription", "description": "Description\nPLAXIS 2D- (Complete Features ) Check For individual features from site\nPLAXIS 2D includes all the essential functionalities to perform everyday deformation and safety analysis for soil and rock that do not require the consideration of creep, steady state groundwater or thermal flow, consolidation analysis, or any time-dependent effects.\n\nFeatures PLAXIS 2D, PLAXIS 2D Advanced & Ultimate \n \n\n#PROJECT AND MODEL PROPERTIES\nSelection of imperial and SI units for length, force, etc.\nSelect between plane strain and axi-symmetric models\nSelect between 6-noded and 15-noded element types\nConstants tab in Project properties\n\n\n#GEOMETRY CREATION\nCreate Borehole Tool\nSelect, Move and Array Tools\nCreate Soil Polygon, Soil Rectangle Tools\nCreate Point & Line Load Tools\nCreate Point & Line Prescribed Displacement Tools\nCreate Embedded Beam Row, Plate, Geogrid, Fixed-End Anchor, Node-to-node Anchor, Interface Tools\nCreate Line Contraction Tool\nCreate Well, Drain and Groundwater Flow Boundary Conditions Tools\nCreate Thermal Flow Boundary Condition Tool\nCreate Added Mass Tool\nTunnel Designer\nReinforcement (Rockbolts) Definition in Tunnel Designer\n\n\n#SOIL MATERIAL MODELS\nLinear elastic\nMohr-Coulomb\nHardening Soil\nHardening Soil Small Strain Stiffness\nModified cam-clay\nJointed Rock model\nNGI-ADP\nHoek-Brown, with Parameter guide\nSoft soil\nSoft Soil creep\nSekiguchi Ohta (Viscid)\nSekiguchi Ohta (Inviscid)\nUDCAM-S and Cyclic Accumulation tool\nConcrete\nUser Defined Soil Models\nUBC3D-PLM (liquefaction)\n\n\n#SOIL MATERIAL DRAINAGE TYPES\nDrained\nUndrained A\nUndrained B\nUndrained C\nNon-porous\n\n\n#STRUCTURAL ELEMENT MATERIAL TYPES\nElastic, elastoplastic & elastoplastic (M-Kappa) Plates\nElastic, elastoplastic, elastoplastic (N-Epsilon) & viscoelastic Geogrids\nElastic, elastoplastic & elastoplastic (M-Kappa) Embedded beam rows\nElastic, elastoplastic & elastoplastic with residual strength Fixed-end and Node-to-node Anchors\n\n#DYNAMIC, GROUNDWATER AND THERMAL FLOW MATERIAL PROPERTIES\nGroundwater properties, incl. soil classification systems (Hypres, USDA etc) and predefined data sets for (Approximate) Van Genuchten models for soil materials\nThermal properties for soil and structural elements (excl. embedded beam row)\nRayleigh damping for soil and structural elements\n\n\n#INITIAL CALCULATION TYPES\nK₀ procedure\nGravity loading\nField stress\nGround water flow only\n\n#DEFORMATION CALCULATION TYPES\nPlastic\nSafety\nConsolidation\nDynamic\nDynamic with consolidation\nFully coupled flow-deformation\n\n#PORE PRESSURE CALCULATION TYPES\nPhreatic level\nUse pore pressures from previous phase\nSteady state groundwater flow\nTransient groundwater flow\n\n#THERMAL CALCULATION TYPES\nIgnore temperature\nEarth gradient\nSteady state thermal flow\nUse temperatures from previous phase\nTransient thermal flow\n\n#MISCELLANEOUS FEATURES, TOOLS AND INTEROPABILITY\nSpatial variation of preconsolidation\nTunnel deconfinement\nCreate cluster field stress\nStaged construction & automatic regeneration of construction stages\nMulticore and parallel calculation\nDesign Approaches\nPseudostatic analysis\nGenerate Stratigraphy from imported CPT Logs\nSoilTest and parameter optimization tool\nSensitivity analysis and Parameter variation\nPLAXIS 2D Classic to PLAXIS 2D CONNECT Edition project converter\nPLAXIS 2D LE model import\nPLAXIS 2D to 3D Converter\nCalculation Manager\nCAD Import and Export\nCommand line input (Input, Output & SoilTest)\nCommand line autocomplete (Input, Output & SoilTest)\nCommands runner (Input, Output & SoilTest)\nMacro library and running macros (Input, Output & SoilTest)\nRemote scripting for Input, Output and SoilTest\nScripting reference\n1D Site response analysis tool\nProjectWise integration, loading from and saving to ProjectWise server\nBentley Cloud Services: personal & project portal, project association\n\n\n#TIME DEPENDENT FUNCTIONS\nTime dependent groundwater flow components for water levels, groundwater flow boundary conditions and soil clusters\nDefinition of groundwater flow functions to specify time dependent changes in head or discharge, etc.\nTime dependent thermal components for thermal flow boundary conditions and soil clusters\nDefinition of thermal flow functions to specify time dependent changes in temperature or heat flux, etc.\nDynamic components in x and y direction for point and line loads or prescribed displacements\nDefinition of Dynamic multipliers to create vibration and earthquake signals\nScaling tools, Fourier, response spectra & Arias intensity plots and drift correction for input earthquake signals\n\n#DYNAMIC BOUNDARY CONDITIONS\nViscous\nTied degrees of freedom\nCompliant base and free field boundaries\nAll nodes fixity\n\n#POSTPROCESSING & RESULTS\nVarious ways to display forces, displacements, stresses and strains in contour, vector, and iso-surface plots\nTables of results with copy, sorting and filter options\nCurve manager to plot graphs of various results across a selection of calculation phases\nLoad-Displacement curves\nCross-section tools and cross-section curves\nAutomatic and manual centerline extraction for structural forces plots of volume plates\nResulting forces view\nPlot annotations\nAnimations\nReport generator\nPrinting and saving plots & curves\nPlots & Curves of accelerations, velocities, structural forces envelopes for Dynamic phases\nCurve plots of Pseudo Spectral Acceleration, relative displacements and switching between time & frequency representations\nPlots and curves of pore pressures for phreatic level calculations\nPlots and curves of pore pressures, saturation, suction, and Darcy flux for steady state groundwater flow calculations\nPlots and curves of pore pressures, saturation, suction, and Darcy flux for transient groundwater flow or fully coupled flow deformation calculations\nPlots and curves of temperature, ice saturation and heat flux for steady state thermal flow calculations\nPlots and curves of temperature, ice saturation and heat flux for transient thermal flow or full thermo-hydro-mechanical coupled calculations\nExport of results to Paraview", "price": 355570.0, "discountamount": 17000.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": null, "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 50, "imageuri": "https://productimages.withfloats.com/actual/64dd0428642e5400011799cf.png", "tileimageuri": "https://productimages.withfloats.com/tile/64dd0428642e5400011799cf.png", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2023-08-16T17:15:18.069Z", "updatedon": "2024-04-01T12:12:50.139Z", "buyonlinelink": null, "producturl": "http://WWW.ADVEDUCARE.COM/products/bentley-plaxis-2d-advanced-virtuosity-annual-subscription/50", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "Bentley", "category": "Bentley Software", "tags": [ "plaxis 2d", "plaxis 3d", "Plaxis Software", "Bentley software", "Geotechnical Software" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "UniquePaymentUrl", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "64dd01af9b00660001a67174", "fptag": "EDUCAREADV", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "PLAXIS 2D Virtuosity Annual Subscription", "description": "PLAXIS 2D- (Complete Features ) Check For individual features from site\nPLAXIS 2D includes all the essential functionalities to perform everyday deformation and safety analysis for soil and rock that do not require the consideration of creep, steady state groundwater or thermal flow, consolidation analysis, or any time-dependent effects.\n\nFeatures PLAXIS 2D, PLAXIS 2D Advanced & Ultimate \n \n\n#PROJECT AND MODEL PROPERTIES\nSelection of imperial and SI units for length, force, etc.\nSelect between plane strain and axi-symmetric models\nSelect between 6-noded and 15-noded element types\nConstants tab in Project properties\n\n\n#GEOMETRY CREATION\nCreate Borehole Tool\nSelect, Move and Array Tools\nCreate Soil Polygon, Soil Rectangle Tools\nCreate Point & Line Load Tools\nCreate Point & Line Prescribed Displacement Tools\nCreate Embedded Beam Row, Plate, Geogrid, Fixed-End Anchor, Node-to-node Anchor, Interface Tools\nCreate Line Contraction Tool\nCreate Well, Drain and Groundwater Flow Boundary Conditions Tools\nCreate Thermal Flow Boundary Condition Tool\nCreate Added Mass Tool\nTunnel Designer\nReinforcement (Rockbolts) Definition in Tunnel Designer\n\n\n#SOIL MATERIAL MODELS\nLinear elastic\nMohr-Coulomb\nHardening Soil\nHardening Soil Small Strain Stiffness\nModified cam-clay\nJointed Rock model\nNGI-ADP\nHoek-Brown, with Parameter guide\nSoft soil\nSoft Soil creep\nSekiguchi Ohta (Viscid)\nSekiguchi Ohta (Inviscid)\nUDCAM-S and Cyclic Accumulation tool\nConcrete\nUser Defined Soil Models\nUBC3D-PLM (liquefaction)\n\n\n#SOIL MATERIAL DRAINAGE TYPES\nDrained\nUndrained A\nUndrained B\nUndrained C\nNon-porous\n\n\n#STRUCTURAL ELEMENT MATERIAL TYPES\nElastic, elastoplastic & elastoplastic (M-Kappa) Plates\nElastic, elastoplastic, elastoplastic (N-Epsilon) & viscoelastic Geogrids\nElastic, elastoplastic & elastoplastic (M-Kappa) Embedded beam rows\nElastic, elastoplastic & elastoplastic with residual strength Fixed-end and Node-to-node Anchors\n\n#DYNAMIC, GROUNDWATER AND THERMAL FLOW MATERIAL PROPERTIES\nGroundwater properties, incl. soil classification systems (Hypres, USDA etc) and predefined data sets for (Approximate) Van Genuchten models for soil materials\nThermal properties for soil and structural elements (excl. embedded beam row)\nRayleigh damping for soil and structural elements\n\n\n#INITIAL CALCULATION TYPES\nK₀ procedure\nGravity loading\nField stress\nGround water flow only\n\n#DEFORMATION CALCULATION TYPES\nPlastic\nSafety\nConsolidation\nDynamic\nDynamic with consolidation\nFully coupled flow-deformation\n\n#PORE PRESSURE CALCULATION TYPES\nPhreatic level\nUse pore pressures from previous phase\nSteady state groundwater flow\nTransient groundwater flow\n\n#THERMAL CALCULATION TYPES\nIgnore temperature\nEarth gradient\nSteady state thermal flow\nUse temperatures from previous phase\nTransient thermal flow\n\n#MISCELLANEOUS FEATURES, TOOLS AND INTEROPABILITY\nSpatial variation of preconsolidation\nTunnel deconfinement\nCreate cluster field stress\nStaged construction & automatic regeneration of construction stages\nMulticore and parallel calculation\nDesign Approaches\nPseudostatic analysis\nGenerate Stratigraphy from imported CPT Logs\nSoilTest and parameter optimization tool\nSensitivity analysis and Parameter variation\nPLAXIS 2D Classic to PLAXIS 2D CONNECT Edition project converter\nPLAXIS 2D LE model import\nPLAXIS 2D to 3D Converter\nCalculation Manager\nCAD Import and Export\nCommand line input (Input, Output & SoilTest)\nCommand line autocomplete (Input, Output & SoilTest)\nCommands runner (Input, Output & SoilTest)\nMacro library and running macros (Input, Output & SoilTest)\nRemote scripting for Input, Output and SoilTest\nScripting reference\n1D Site response analysis tool\nProjectWise integration, loading from and saving to ProjectWise server\nBentley Cloud Services: personal & project portal, project association\n\n\n#TIME DEPENDENT FUNCTIONS\nTime dependent groundwater flow components for water levels, groundwater flow boundary conditions and soil clusters\nDefinition of groundwater flow functions to specify time dependent changes in head or discharge, etc.\nTime dependent thermal components for thermal flow boundary conditions and soil clusters\nDefinition of thermal flow functions to specify time dependent changes in temperature or heat flux, etc.\nDynamic components in x and y direction for point and line loads or prescribed displacements\nDefinition of Dynamic multipliers to create vibration and earthquake signals\nScaling tools, Fourier, response spectra & Arias intensity plots and drift correction for input earthquake signals\n\n#DYNAMIC BOUNDARY CONDITIONS\nViscous\nTied degrees of freedom\nCompliant base and free field boundaries\nAll nodes fixity\n\n#POSTPROCESSING & RESULTS\nVarious ways to display forces, displacements, stresses and strains in contour, vector, and iso-surface plots\nTables of results with copy, sorting and filter options\nCurve manager to plot graphs of various results across a selection of calculation phases\nLoad-Displacement curves\nCross-section tools and cross-section curves\nAutomatic and manual centerline extraction for structural forces plots of volume plates\nResulting forces view\nPlot annotations\nAnimations\nReport generator\nPrinting and saving plots & curves\nPlots & Curves of accelerations, velocities, structural forces envelopes for Dynamic phases\nCurve plots of Pseudo Spectral Acceleration, relative displacements and switching between time & frequency representations\nPlots and curves of pore pressures for phreatic level calculations\nPlots and curves of pore pressures, saturation, suction, and Darcy flux for steady state groundwater flow calculations\nPlots and curves of pore pressures, saturation, suction, and Darcy flux for transient groundwater flow or fully coupled flow deformation calculations\nPlots and curves of temperature, ice saturation and heat flux for steady state thermal flow calculations\nPlots and curves of temperature, ice saturation and heat flux for transient thermal flow or full thermo-hydro-mechanical coupled calculations\nExport of results to Paraview\n", "price": 284455.0, "discountamount": 14000.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": null, "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 49, "imageuri": "https://productimages.withfloats.com/actual/64dd01bd4db8d600010ad2b3.png", "tileimageuri": "https://productimages.withfloats.com/tile/64dd01bd4db8d600010ad2b3.png", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2023-08-16T17:04:47.109Z", "updatedon": "2024-04-01T12:13:33.731Z", "buyonlinelink": null, "producturl": "http://WWW.ADVEDUCARE.COM/products/plaxis-2d-virtuosity-annual-subscription/49", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "Bentley", "category": "Bentley Software", "tags": [ "plaxis 2d", "plaxis 3d", "Bentley software", "BENTLEY STAAD PRO", "Geotechnical Software", "Plaxis Software" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "UniquePaymentUrl", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "64dcfe3d635f2700010a8435", "fptag": "EDUCAREADV", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "PLAXIS 3D Ultimate Virtuosity Anual Subscription", "description": "PLAXIS 3D Ultimate\nExtend the capabilities of PLAXIS 3D Advanced, to analyze the effects of vibrations in the soil, like earthquakes and moving traffic loads. You can also simulate complex hydrological conditions through time-dependent variations of water levels or flow functions on model boundaries, as well as soil boundaries.\n\nDescription\nPLAXIS 3D Ultimate\nPLAXIS 3D Advanced includes everything that is included in PLAXIS 3D, plus enhances your geotechnical design capabilities with more advanced features and material models. You can consider creep or flow-deformation coupling through consolidation analysis. Additionally, you can solve your problems faster than PLAXIS 3D, by leveraging the multicore solver.\n\nFEATURES COVERED IN PLAXIS 3D Advanced\n\n#PROJECT AND MODEL PROPERTIES\nSelection of imperial and SI units for length, force, etc.\nGEOMETRY CREATION\nCreate Borehole Tool\nSelect, Move, Rotate and Array Tools\nCreate Point, Line, Nurbs Curve and Surface Tools\nPolycurve Designer\nIntersect, Combine, Extrude, Revolve Around Axis, Loft Polycurve and Blend Surfaces Tools\nCreate Point, Line and Surface Load Tools\nCreate Point, Line and Surface Prescribed Displacement Tools\nCreate Embedded Beam, Plate, Geogrid, Fixed-End Anchor, Node-To-Node Anchor, Interface Tools\nCreate Surface Contraction Tool\nCreate Well, Line Drain, Surface Drain and Surface Groundwater Flow Boundary Condition Tools\nCreate Added Mass Tool\nCreate Moving Point and Line Load Tools\nTunnel Designer\nReinforcement (Rockbolts and Umbrella Arches) Definition in the Tunnel Designer\n\nGirder/beam Definition in the Tunnel Designer\n\nTunnel Splitting Tool\n\nDefinition of Excavation Sequence in the Tunnel Designer\n\nAutomatic Generation of Staged Construction Phases for Tunnels\n\n\n#SOIL MATERIAL MODELS\nLinear elastic\nMohr-Coulomb\nHardening Soil\nHardening Soil Small Strain Stiffness\nModified cam-clay\nJointed Rock model\nNGI-ADP\nHoek-Brown, with Parameter guide\nSoft soil\nSoft Soil creep\nSekiguchi Ohta (Viscid)\nSekiguchi Ohta (Inviscid)\nUDCAM-S and Cyclic Accumulation tool\nConcrete\nUser Defined Soil Models\n\nUBC3D-PLM (liquefaction)\n\n#SOIL MATERIAL DRAINAGE TYPES\nDrained\nUndrained A\nUndrained B\nUndrained C\nNon-porous\n\n\n#STRUCTURAL ELEMENT MATERIAL TYPES\nElastic & elastoplastic Plates\nElastic, elastoplastic, elastoplastic (N-Epsilon) & viscoelastic Geogrids\nElastic & elastoplastic Beam\nElastic & elastoplastic Embedded beam\nElastic, elastoplastic & elastoplastic with residual strength Fixed-end and Node-to-node Anchors\n\n\n#DYNAMIC, GROUNDWATER AND THERMAL FLOW MATERIAL PROPERTIES\nGroundwater properties, incl. soil classification systems (Hypres, USDA, etc.) and predefined data sets for (approximate) Van Genuchten models for soil materials\nRayleigh damping for soil and structural elements\n\n#INITIAL CALCULATION TYPES\nK₀ procedure\nGravity loading\nField stress\nGround water flow only\n\n\n#DEFORMATION CALCULATION TYPES\nPlastic\nSafety\nConsolidation\nDynamic\nDynamic with consolidation\nFully coupled flow-deformation\n\n\n#PORE PRESSURE CALCULATION TYPES\nPhreatic level\nUse pore pressures from previous phase\nSteady state groundwater flow\nTransient groundwater flow\n\n\n#MISCELLANEOUS FEATURES, TOOLS AND INTEROPABILITY\nCreate cluster field stress\nStaged construction & automatic regeneration of construction stages\nMulticore and parallel calculation\nPseudostatic analysis\nGenerate Stratigraphy from imported CPT Logs\nSoilTest and parameter optimization tool\nCalculation Manager\nCAD Import (incl. IFC, point clouds, water levels, borehole top and bottom) and Export\nCommand line input (Input, Output & SoilTest)\nCommand line autocomplete (Input, Output & SoilTest)\nCommands runner (Input, Output & SoilTest)\nMacro library and running macros (Input, Output & SoilTest)\nRemote scripting for Input, Output and SoilTest\nScripting reference\nProjectWise integration, loading from and saving to ProjectWise server\nBentley Cloud Services: personal & project portal, project association\nImport of and export to ISM\nPLAXIS 3D Coupling tool for STAAD.Pro\n\n\n#TIME DEPENDENT FUNCTIONS\nTime dependent groundwater flow components for water levels, groundwater flow boundary conditions and soil clusters\nDefinition of groundwater flow functions to specify time dependent changes in head or prescribed discharge, etc.\nDynamic components in x and y direction for point and line loads or displacements\nDefinition of Dynamic multipliers to create vibration and earthquake signals\nScaling tools, Fourier, response spectra & Arias intensity plots and drift correction for input earthquake signals\nDefinition of Movement functions to specify time dependent changes in velocity\nDYNAMIC BOUNDARY CONDITIONS\nViscous\nCompliant base and free field boundaries\nAll nodes fixity\nPOSTPROCESSING & RESULTS\nVarious ways to display forces, displacements, stresses and strains in contour, vector, and iso-surface plots\nTables of results with copy, sorting and filter options\nCurve manager to plot graphs of various results across a selection of calculation phases\nLoad-Displacement curves\nCross-section tools and cross-section curves\nAutomatic and manual centerline extraction for structural forces plots of volumes piles\nResulting forces view\nPlot annotations\nAnimations\nReport generator\nPrinting and saving plots & curves\nPlots & Curves of accelerations, velocities, structural forces envelopes for Dynamic phases\nCurve plots of Pseudo Spectral Acceleration, relative displacements and switching between time & frequency representations\nPlots and curves of pore pressures for phreatic level calculations\nPlots and curves of pore pressures, saturation, suction, and Darcy flux for steady state groundwater flow calculations\nPlots and curves of pore pressures, saturation, suction, and Darcy flux for transient groundwater flow or fully coupled flow deformation calculations\nExport of results to Paraview", "price": 1224935.0, "discountamount": 50000.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": null, "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 48, "imageuri": "https://productimages.withfloats.com/actual/64dcfe3fa673410001642930.jpeg", "tileimageuri": "https://productimages.withfloats.com/tile/64dcfe3fa673410001642930.jpeg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2023-08-16T16:50:05.605Z", "updatedon": "2024-04-01T12:15:17.078Z", "buyonlinelink": null, "producturl": "http://WWW.ADVEDUCARE.COM/products/plaxis-3d-ultimate-virtuosity-anual-subscription/48", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "Bentley", "category": "Bentley Software", "tags": [ "plaxis 2d", "plaxis 3d", "Plaxis Software", "Bentley software", "Geotechnical Software" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "UniquePaymentUrl", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "64dcc66c18b1700001ed979a", "fptag": "EDUCAREADV", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "MicroStation Virtuosity Annual Subscription", "description": "MicroStation is the instrument professionals rely on to design, model, and manage infrastructure.\nIt’s more sophisticated than a tool, it’s an accessible instrument that offers power, control, efficiency, and security. It enables users to deliver innovative designs and creative visualizations and consolidates critical project elements in a single environment for effective, secure project deliverables.\n\nWith MicroStation, you can:\n\nModel anything, anywhere with geospatial context\nCreate conceptual and detailed drafting, drawing, and modeling for any industry\nDesign, communicate, and deliver your infrastructure projects in a single platform\n\n\n#Develop better design, faster\nDraft in 2D: Develop precise drawings using a comprehensive set of drafting tools to efficiently create 2D geometry. Rapidly progress your designs from concept to completion using persistent constraints to maintain your design intent.\n\nModel in 3D: Develop models in real context with a wide range of 3D modeling tools. Build and edit curve, surface, mesh, feature, and solids models. Build functional and parametric components with predefined variations to simplify managing and finding many similar components.\n\nDevelop Comprehensive Model Documentation: Present documentation and related design information within the spatial context of the 3D model to significantly improve their clarity. Embed links to related Microsoft Office documents and websites. Easily navigate from content in one file or model to others.\n\nAnalyze and Visualize Models: Analyze and visualize models based on their geometry or attributes. Detect and resolve clashes; perform analysis of real-world solar exposure and shading. Apply real-time display styles to visualize models based on each object’s height, slope, aspect angle, and other embedded properties.\n\nAccelerate Workflows: Speed design tasks and related workflows with intelligent interactive snapping. Improve productivity with the AccuDraw tool for dynamic data entry with heads-up display. Customize and group tools and tasks and reduce keystrokes with keyboard position mapping and the ability to customize cursor menus.\n\nSecure your Data: Ensure that only certain individuals can view and/or edit files. You can ensure the integrity of your documents using digital signatures and control the digital rights to view, edit, print, and copy file contents, including a pre-defined expiration date when the file can be accessed\n\n#Better Inform Teams\nCreate Animations Produce realistic movies and simulations from design, construction, and operational models with the built-in VUE rendering engine. Choose from keyframe and time-based animation. Get the results you want, faster, using live on-screen animation previews and distributed network processing.\n\nCreate Lifelike Renderings Create lifelike visualizations using a built-in VUE Rendering engine. Use online and delivered libraries of physically correct materials, lighting, and rich photorealistic content (RPC). Get results faster with distributed network rendering.\n\nGenerate Intelligent Documentation Generate consistent, high-quality paper and digital deliverables such as paper plots, reports, 2D/3D PDFs, and 3D physical models. Automate and speed annotation, display styles, and reports by generating them directly from the embedded properties of objects. This automates and speeds annotation display styles, and visual reports, and gives you confidence that they will always remain in sync with the model during work in progress.\n\nCreate Your Digital Twin Easily start synchronizing your existing designs with an iModel to take advantage of a Digital Twin. Share the Digital Twin with your project team to see the latest revisions and changes to the project.\n\nReview Designs Collaboratively Work in real-time with your project team members reviewing/tracking/ resolving with the Issue Resolution Service. Identify, assign, and review the progress of revisions and changes for any type of issue that arises in the model.\n\nMaintain and Enforce Standards Ensure the proper application of organizational and project specific standards. Apply templates to control geometry and data standards such as styles for dimensions, text, lines, detail symbols, and more. Once designs are complete, use automated tools to check drawings for standards compliance.\n\n#Freedom to focus on design\nGeospatially Locate Projects Integrate geospatial information from hundreds of supported coordinate systems into your designs. Access data from OGC Web Map Servers, use realtime GPS data, Microsoft Bing maps, and create and reference geospatial PDFs.\n\nIncorporate Common Design Formats Easily read, share, and consume precise data in key industry formats such as Autodesk®’s RealDWG™ (share and consume), IFC (read), Esri SHP (read), and more. Aggregate and assemble multiple file formats including PDF, U3D, 3DS, Rhino 3DM, IGES, Parasolid, ACIS SAT, CGM, STEP AP203/AP214, STL, OBJ, VRMLWorld, SketchUp SKP, and Collada.\n\nIncorporate Referenced Design Content View and work with design information from others in real-time using live referencing of 2D/3D DGN, DWG, and large image files, refreshed on demand. You can even natively reference PDF files into your designs.\n\nIntegrate Point Clouds Easily incorporate a wide range and scale of point-cloud data into the design environment. “Visualize, render, and measure point-cloud data to better understand existing conditions and speed dimensioning and modeling.\n\nIntegrate Raster Imagery Easily incorporate raster imagery of all types, including aerial and satellite imagery, and scanned documents. Choose from dozens of supported file formats including CALS, BMP, TIF, GeoTIFF, JPG, and many more.\n\nIntegrate Reality Meshes Incorporate realistic, photo-textured 3D models or reality meshes into your designs. These highly realistic models can be used directly in the design environment as the basis for your design and construction modeling for faster and better-quality models.\n\nManage Design Changes Track and easily understand changes made to design files, even at the component level, throughout their lifecycle. View, plot, and selectively roll back any individual changes made throughout the history of a file.\n\nWork in a Personalized Environment Confidently work in the right context for each project because the required settings and standards are automatically applied. Take advantage of personalized recommendations to help you get the most from your use of the software.\n\nExtend and Customize Workflows Streamline your workflow and integrate with enterprise systems using a wide range of available tools to customize the user interface. Develop solutions using Microsoft (VBA), .NET, C++, C# as well as user-defined macros.\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\nVIRTUOSO SUBSCRIPTION\nStay nimble and lower costs\n", "price": 108077.0, "discountamount": 5000.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": null, "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 45, "imageuri": "https://productimages.withfloats.com/actual/64dcc66f08869d0001dac4aa.png", "tileimageuri": "https://productimages.withfloats.com/tile/64dcc66f08869d0001dac4aa.png", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2023-08-16T12:51:56.922Z", "updatedon": "2024-04-01T12:14:26.481Z", "buyonlinelink": null, "producturl": "http://WWW.ADVEDUCARE.COM/products/microstation-virtuosity-annual-subscription/45", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "Bentley System", "category": "Bentley Software", "tags": [ "Microstation", "lidar software", "CAD SOFTWARE" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "UniquePaymentUrl", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "64dc876f635f2700010a7f62", "fptag": "EDUCAREADV", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "Structural Worksuite- Annual Subscription License", "description": "Perform analysis and design for any size or type of structure, with any material, quickly and with confidence\nStructural WorkSuite is a bundle of Bentley’s most popular structural applications in a single cost-effective license. This cost-effective bundle of structural analysis applications includes applications like RAM and STAAD. It helps engineers on tight budgets take advantage of comprehensive workflows to take a project from concept through completion.\n\nFEATURES COVERED :-\n\n\n#MODELING\nStructure wizard enabling quick creation of models\nBuild models using input with built-in text editor\nCalculate section properties and evaluate section stresses with section wizard\nOver forty-five section libraries tailored to different industries\nPhysical and analytical modeling environments\n\n#BASIC ANALYSIS\nLinear static elastic, P-Delta, dynamic, AISC direct analysis\nFinite element analysis\nAutomated wind and seismic load generation\nAutomated load combination generation according to building codes\n\n#STRUCTURAL DESIGN\nDesign of structural steel elements\nDesign basic reinforced concrete elements\nIntegrated design of basic foundations including column footings (not all types)\nIntegrated design of basic structural steel connections (not all types)\nProduce automated steel drawings and details directly from STAAD model*\n\n#INTEROPERABILITY\nCreate macros using OpenSTAAD API to integrate with Excel or in-house programs\nIntegration with AutoPIPE for analysis of combined piping/structural framing system\n\n#ADVANCED ANALYSIS\nNonlinear geometric and cable analysis\nEigen buckling analysis with in-depth buckling mode evaluation\nFloor spectrum analysis due to time history loading (seismic design)\nSteady state dynamic performance for vibration design\nPushover analysis (FEMA 356)\n\n#REINFORCED CONCRETE DESIGN & DETAILING\nDesign and detailing of reinforced concrete beams, columns, footings, pile caps, walls, and slabs\nDesign reports, material takeoffs, and bill of quantity\nAutomated reinforcing drawings, details, and schedules, with customizable settings\n\n#INTEGRATED DESIGN\nFull access to RAM Connection, for design of structural steel connections\nFull access to STAAD Foundation Advanced, for integrated design and documentation of foundations\nFull access to specialty design software for post-tensioned concrete slabs and foundations (RAM Concept)\nFull access to specialty design software for multi-story buildings (RAM Structural System)", "price": 161782.0, "discountamount": 10000.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "RAM", "size", "type", "STAAD", "design", "project", "Bentley", "concept", "material", "structure", "advantage", "engineers", "completion", "confidence", "tight budgets", "cost-effective bundle", "comprehensive workflows", "single cost-effective license", "popular structural applications", "structural analysis applications", "Structural Worksuite- Annual Subscription License" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 42, "imageuri": "https://productimages.withfloats.com/actual/64dca5284db8d600010aaf76.jpeg", "tileimageuri": "https://productimages.withfloats.com/tile/64dca5284db8d600010aaf76.jpeg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2023-08-16T08:23:11.154Z", "updatedon": "2024-04-01T12:28:25.854Z", "buyonlinelink": null, "producturl": "http://WWW.ADVEDUCARE.COM/products/structural-worksuite-annual-subscription-license/42", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "Bentley", "category": "Bentley Software", "tags": [], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "UniquePaymentUrl", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "64dc858c9b00660001a66cf2", "fptag": "EDUCAREADV", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "OpenRoads Designer Virtuosity-Annual Subscription License", "description": "OpenRoads Designer creates road designs with construction-driven engineering and analysis\nOpenRoads Designer is an extremely versatile civil design application that is used for all types and sizes of civil projects around the world. The application addresses a wide variety of complex tasks such as interchange design, roundabout design, earthworks, surveying, sanitary and stormwater network design, subsurface utilities, and production of construction staking reports. Traditional 2D methods are manual and tedious, full of communication and data gaps, leaving you frustrated, exhausted, and with a project that costs you accuracy, time, and money. From survey through plan production and construction documentation, OpenRoads Designer is the one application you need to meet project requirements on time, every time, regardless of change.", "price": 301001.0, "discountamount": 10000.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "time", "money", "sizes", "world", "types", "reports", "analysis", "sanitary", "accuracy", "data gaps", "surveying", "earthworks", "wide variety", "road designs", "complex tasks", "communication", "civil projects", "plan production", "one application", "roundabout design", "interchange design", "subsurface utilities", "project requirements", "Traditional 2D methods", "stormwater network design", "construction documentation", "construction-driven engineering", "versatile civil design application", "OpenRoads Designer Virtuosity-Annual Subscription License" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 40, "imageuri": "https://productimages.withfloats.com/actual/64dc859ff3aede0001ad8bd0.jpg", "tileimageuri": "https://productimages.withfloats.com/tile/64dc859ff3aede0001ad8bd0.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2023-08-16T08:15:08.429Z", "updatedon": "2023-08-16T08:15:08.429Z", "buyonlinelink": null, "producturl": "http://WWW.ADVEDUCARE.COM/products/openroads-designer-virtuosity-annual-subscription-license/40", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "Bentley", "category": "Bentley Software", "tags": null, "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "None", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "60ceec31f83dd80001112cbf", "fptag": "EDUCAREADV", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "STAAD Foundation Advanced- A powerful Foundation Design Software", "description": "COMPREHENSIVE FOUNDATION DESIGN SOFTWARE\nFoundation Advanced provides you with a streamlined workflow through its integration with STAAD.Pro or as a stand-alone application for any type of foundation.\nGet efficient foundation design and documentation using plant-specific design tools, multiple design codes with U.S. and metric bar sizes, design optimization, and automatic drawing generation. STAAD Foundation Advanced provides you with a streamlined workflow through its integration with STAAD.Pro or as a stand-alone application. You can design virtually any type of foundation, from basic to the most complex. \nEasily model complex or simple footings, such as plant foundations supporting vertical vessels, horizontal vessels, tanks and other footings\nQuickly model common foundations such as isolated, combined, strip, pile caps, and many more \nSimplify challenging scenarios such as vibrating machine foundation, lateral analysis of piers, or mat design using FEA\nEfficiently use your structural model with the foundation model through integration with STAAD.Pro, including automatically synced changes in both models\n\nCAPABILITIES\n\n\nANALYZE GRAVITY AND LATERAL LOAD\nDesign and analyze simple or complex structures for a wide range of loading conditions, including conditions induced by gravity like dead and live loads, such as skip conditions and tilt-up walls, in combination with lateral loads like wind and seismic.\n\nANALYZE MACHINE VIBRATION AND SETTLEMENT\nAnalyze machine block foundation for dynamic loading. Leverage wizard-based input for faster FEA solids model creation, including rotating and reciprocating machines, various loading, and soil spring options. Perform in-depth analysis review using dynamic graphs and detailed formulae in reports.\n \nANALYZE STEADY STATE DYNAMIC PERFORMANCE\nIncrease performance up to 2,000 times faster with STAAD’s advanced stiffness matrix solving application. Tackle large geometric models with multiple load cases without compromising analysis quality. Achieve top-notch performance for dynamic analysis.\n\nCALCULATE PUNCHING SHEAR\nCalculate and design concrete slab/column connections for punching shear, including the effects of unbalanced joint moments.\n\nCOMPLY WITH SEISMIC REQUIREMENTS\nDesign and detail seismic force-resisting systems, generating seismic loads according to the relevant building code. Consider these forces in the design of elements and, where applicable, the design of frames and the larger structural system. Enforce the ductility requirements of the selected design code in element proportioning and detailing.\n\nDESIGN FOUNDATIONS TO INTERNATIONAL STANDARDS\nDesign a wide variety of foundations, from simple spread footings to complicated mats and specialized machinery pads. Complete your designs with confidence thanks to extensive support of international standards.\n\nDETAIL AND SCHEDULE CONCRETE REINFORCING\nProduce rebar placing drawings, including sections, plans, details, bar bending schedules, material take-offs and beam/column/footing schedules, all based on the 3D model. All schedules and drawings can be customized to adhere to your company’s standards for concrete projects.\n\nGENERATE DESIGN LOADS AND LOAD COMBINATIONS\nApply code-prescribed wind and seismic loads to the structure using built-in load generators. Calculate relevant loading parameters automatically based on the structural geometry, mass, and selected building code provisions without the need for separate hand calculations. Combine these lateral load cases with gravity and other types of loads using load combination generators.\n\nPRODUCE STRUCTURAL DESIGN DOCUMENTATION\nGenerate structural design documents including necessary plans and elevations that are used to convey the design intent. Changes made to the 3D model are automatically updated in the documentation.\nProduce structural details\nProduce detailed 2D drawings directly from design results established in the structural model. Customize the style and format of the drawings using settings offered within the software.", "price": 150077.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": null, "isarchived": false, "isavailable": false, "applicationid": null, "productindex": 32, "imageuri": "https://productimages.withfloats.com/actual/60ceec36a203ce0001cb6ea7.png", "tileimageuri": "https://productimages.withfloats.com/tile/60ceec36a203ce0001cb6ea7.png", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2021-06-20T07:20:17.951Z", "updatedon": "2023-04-12T08:00:14.599Z", "buyonlinelink": null, "producturl": "http://WWW.ADVEDUCARE.COM/products/staad-foundation-advanced-a-powerful-foundation-design-software/32", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "Bentley Systems", "category": "Bentley Software", "tags": [ "staad.pro", "STAAD FOUNDATION ADVANCED", "STRUCTURAL DESIGN SOFTWARE" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "None", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "60ce35040f1ecb0001228d68", "fptag": "EDUCAREADV", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "RAM Structural System-Structural Design for Buildings Make Easy", "description": "RAM Structural System-Complete Structural Design Software\n\nMoreover it save time and money by automating the most tedious, repetitive, and time-consuming project tasks. \nWhen you increase your productivity, you can focus on the more critical aspects of design and also provide a superior and more cost-effective solution to your client. \nRAM Structural System provides you a complete solution for analysis, design, drafting, and documentation for steel and concrete buildings, foundations, and even individual structural components. All the features are compliance with your local building codes. \nRAM Structural System helps engineers like you:\nSave countless hours with an intuitive modelling environment\nDesign structural steel and concrete elements, including foundations, to conform with design and building code provisions\nAnalyse the buildings’ lateral system for wind and seismic loads in the most practical way.\nCalculate the gravity load distribution across the structure using specialized methods, tailored to specific framing systems\nShare your structural data with applications such as Revit, Tekla, and Bentley’s OpenBuildings Designer\nSeamlessly integrate with complimentary applications like RAM Concept and RAM Connection to make the most of your RAM model\n\nStreamline your design and analysis workflows and gain the confidence that your designs will stand up to the test of time. Finally it deliver safe and optimized tilt-up wall designs, on time and on budget.\n\nCAPABILITIES\n\n\nANALYZE GRAVITY AND LATERAL LOAD\nDesign and analyze simple or complex structures for a wide range of loading conditions, including conditions induced by gravity like dead and live loads, such as skip conditions and tilt-up walls, in combination with lateral loads like wind and seismic.\n\nCOMPLY WITH SEISMIC REQUIREMENTS\nDesign and detail seismic force-resisting systems, generating seismic loads according to the relevant building code. Consider these forces in the design of elements and, where applicable, the design of frames and the larger structural system. Enforce the ductility requirements of the selected design code in element proportioning and detailing.\n\nDESIGN LATERAL RESISTING FRAMES\nPerform extensive building-code checks for seismic and wind forces on braced frames and moment frames. Quickly obtain safe and reliable designs for all of your structural projects.\n\nDESIGN TILT-UP WALLS\nCreate a single 3D model that includes your tilt-up walls and roof/floor systems. Simplify modeling accounts for analytical separation between adjacent walls and eccentric gravity loads on walls. Apply pressures with linearly varying magnitudes and automatic distribution over wall openings. Perform elastic second-order analysis for consideration of slenderness effects. Design concrete walls for out-of-plane and in-plane forces, with consideration of reveals and seismic provisions for special walls.\n\nDETAIL AND SCHEDULE CONCRETE REINFORCING\nProduce rebar placing drawings, including sections, plans, details, bar bending schedules, material take-offs and beam/column/footing schedules, all based on the 3D model. All schedules and drawings can be customized to adhere to your company’s standards for concrete projects.\n\nGENERATE DESIGN LOADS AND LOAD COMBINATIONS\nApply code-prescribed wind and seismic loads to the structure using built-in load generators. Calculate relevant loading parameters automatically based on the structural geometry, mass, and selected building code provisions without the need for separate hand calculations. Combine these lateral load cases with gravity and other types of loads using load combination generators.\n\nINTEGRATE SLAB AND FOUNDATION DESIGNS\nDesign slabs and foundations using specialized applications that are integrated within the master analysis model. Create design calculations and reinforcing drawings. Add the design information in BIM models by using ISM.\n\nPRODUCE STRUCTURAL DESIGN DOCUMENTATION\nGenerate structural design documents including necessary plans and elevations that are used to convey the design intent. Changes made to the 3D model are automatically updated in the documentation.", "price": 337000.0, "discountamount": 10000.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": null, "isarchived": false, "isavailable": false, "applicationid": null, "productindex": 26, "imageuri": "https://productimages.withfloats.com/actual/60ce350c44a561000109fcdc.png", "tileimageuri": "https://productimages.withfloats.com/tile/60ce350c44a561000109fcdc.png", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2021-06-19T18:18:44.08Z", "updatedon": "2023-04-12T12:21:21.864Z", "buyonlinelink": null, "producturl": "http://WWW.ADVEDUCARE.COM/products/ram-structural-system-structural-design-for-buildings-make-easy/26", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "Bentley Systems", "category": "Bentley Software", "tags": [], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "None", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false } ], "hasmoreitems": false, "isapirequest": false, "totalresults": 27, "query": null, "floatingpoint": null }