Home> Products> automatic generation

{ "products": [ { "_id": "64dd05287191e90001251afb", "fptag": "EDUCAREADV", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "PLAXIS 2D Ultimate Virtuosity Annual Subscription", "description": "Description\nPLAXIS 2D- (Complete Features ) Check For individual features from site\nPLAXIS 2D includes all the essential functionalities to perform everyday deformation and safety analysis for soil and rock that do not require the consideration of creep, steady state groundwater or thermal flow, consolidation analysis, or any time-dependent effects.\n\nFeatures PLAXIS 2D, PLAXIS 2D Advanced & Ultimate \n \n\n#PROJECT AND MODEL PROPERTIES\nSelection of imperial and SI units for length, force, etc.\nSelect between plane strain and axi-symmetric models\nSelect between 6-noded and 15-noded element types\nConstants tab in Project properties\n\n\n#GEOMETRY CREATION\nCreate Borehole Tool\nSelect, Move and Array Tools\nCreate Soil Polygon, Soil Rectangle Tools\nCreate Point & Line Load Tools\nCreate Point & Line Prescribed Displacement Tools\nCreate Embedded Beam Row, Plate, Geogrid, Fixed-End Anchor, Node-to-node Anchor, Interface Tools\nCreate Line Contraction Tool\nCreate Well, Drain and Groundwater Flow Boundary Conditions Tools\nCreate Thermal Flow Boundary Condition Tool\nCreate Added Mass Tool\nTunnel Designer\nReinforcement (Rockbolts) Definition in Tunnel Designer\n\n\n#SOIL MATERIAL MODELS\nLinear elastic\nMohr-Coulomb\nHardening Soil\nHardening Soil Small Strain Stiffness\nModified cam-clay\nJointed Rock model\nNGI-ADP\nHoek-Brown, with Parameter guide\nSoft soil\nSoft Soil creep\nSekiguchi Ohta (Viscid)\nSekiguchi Ohta (Inviscid)\nUDCAM-S and Cyclic Accumulation tool\nConcrete\nUser Defined Soil Models\nUBC3D-PLM (liquefaction)\n\n\n#SOIL MATERIAL DRAINAGE TYPES\nDrained\nUndrained A\nUndrained B\nUndrained C\nNon-porous\n\n\n#STRUCTURAL ELEMENT MATERIAL TYPES\nElastic, elastoplastic & elastoplastic (M-Kappa) Plates\nElastic, elastoplastic, elastoplastic (N-Epsilon) & viscoelastic Geogrids\nElastic, elastoplastic & elastoplastic (M-Kappa) Embedded beam rows\nElastic, elastoplastic & elastoplastic with residual strength Fixed-end and Node-to-node Anchors\n\n#DYNAMIC, GROUNDWATER AND THERMAL FLOW MATERIAL PROPERTIES\nGroundwater properties, incl. soil classification systems (Hypres, USDA etc) and predefined data sets for (Approximate) Van Genuchten models for soil materials\nThermal properties for soil and structural elements (excl. embedded beam row)\nRayleigh damping for soil and structural elements\n\n\n#INITIAL CALCULATION TYPES\nK₀ procedure\nGravity loading\nField stress\nGround water flow only\n\n#DEFORMATION CALCULATION TYPES\nPlastic\nSafety\nConsolidation\nDynamic\nDynamic with consolidation\nFully coupled flow-deformation\n\n#PORE PRESSURE CALCULATION TYPES\nPhreatic level\nUse pore pressures from previous phase\nSteady state groundwater flow\nTransient groundwater flow\n\n#THERMAL CALCULATION TYPES\nIgnore temperature\nEarth gradient\nSteady state thermal flow\nUse temperatures from previous phase\nTransient thermal flow\n\n#MISCELLANEOUS FEATURES, TOOLS AND INTEROPABILITY\nSpatial variation of preconsolidation\nTunnel deconfinement\nCreate cluster field stress\nStaged construction & automatic regeneration of construction stages\nMulticore and parallel calculation\nDesign Approaches\nPseudostatic analysis\nGenerate Stratigraphy from imported CPT Logs\nSoilTest and parameter optimization tool\nSensitivity analysis and Parameter variation\nPLAXIS 2D Classic to PLAXIS 2D CONNECT Edition project converter\nPLAXIS 2D LE model import\nPLAXIS 2D to 3D Converter\nCalculation Manager\nCAD Import and Export\nCommand line input (Input, Output & SoilTest)\nCommand line autocomplete (Input, Output & SoilTest)\nCommands runner (Input, Output & SoilTest)\nMacro library and running macros (Input, Output & SoilTest)\nRemote scripting for Input, Output and SoilTest\nScripting reference\n1D Site response analysis tool\nProjectWise integration, loading from and saving to ProjectWise server\nBentley Cloud Services: personal & project portal, project association\n\n\n#TIME DEPENDENT FUNCTIONS\nTime dependent groundwater flow components for water levels, groundwater flow boundary conditions and soil clusters\nDefinition of groundwater flow functions to specify time dependent changes in head or discharge, etc.\nTime dependent thermal components for thermal flow boundary conditions and soil clusters\nDefinition of thermal flow functions to specify time dependent changes in temperature or heat flux, etc.\nDynamic components in x and y direction for point and line loads or prescribed displacements\nDefinition of Dynamic multipliers to create vibration and earthquake signals\nScaling tools, Fourier, response spectra & Arias intensity plots and drift correction for input earthquake signals\n\n#DYNAMIC BOUNDARY CONDITIONS\nViscous\nTied degrees of freedom\nCompliant base and free field boundaries\nAll nodes fixity\n\n#POSTPROCESSING & RESULTS\nVarious ways to display forces, displacements, stresses and strains in contour, vector, and iso-surface plots\nTables of results with copy, sorting and filter options\nCurve manager to plot graphs of various results across a selection of calculation phases\nLoad-Displacement curves\nCross-section tools and cross-section curves\nAutomatic and manual centerline extraction for structural forces plots of volume plates\nResulting forces view\nPlot annotations\nAnimations\nReport generator\nPrinting and saving plots & curves\nPlots & Curves of accelerations, velocities, structural forces envelopes for Dynamic phases\nCurve plots of Pseudo Spectral Acceleration, relative displacements and switching between time & frequency representations\nPlots and curves of pore pressures for phreatic level calculations\nPlots and curves of pore pressures, saturation, suction, and Darcy flux for steady state groundwater flow calculations\nPlots and curves of pore pressures, saturation, suction, and Darcy flux for transient groundwater flow or fully coupled flow deformation calculations\nPlots and curves of temperature, ice saturation and heat flux for steady state thermal flow calculations\nPlots and curves of temperature, ice saturation and heat flux for transient thermal flow or full thermo-hydro-mechanical coupled calculations\nExport of results to Paraview", "price": 506686.0, "discountamount": 25000.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": null, "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 51, "imageuri": "https://productimages.withfloats.com/actual/64dd052a5b2f8700019e19e4.png", "tileimageuri": "https://productimages.withfloats.com/tile/64dd052a5b2f8700019e19e4.png", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2023-08-16T17:19:36.337Z", "updatedon": "2024-04-01T12:12:00.117Z", "buyonlinelink": null, "producturl": "http://WWW.ADVEDUCARE.COM//plaxis-2d-ultimate-virtuosity-annual-subscription/51", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "Bentley", "category": "Bentley Software", "tags": [ "plaxis 2d", "Plaxis 3d", "Plaxis Software", "Geotechnical Software", "Bentley software", "BENTLEY STAAD PRO", "bentley systems" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "UniquePaymentUrl", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "64dd042630ccad00013c8c7e", "fptag": "EDUCAREADV", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "Bentley PLAXIS 2D Advanced Virtuosity Annual Subscription", "description": "Description\nPLAXIS 2D- (Complete Features ) Check For individual features from site\nPLAXIS 2D includes all the essential functionalities to perform everyday deformation and safety analysis for soil and rock that do not require the consideration of creep, steady state groundwater or thermal flow, consolidation analysis, or any time-dependent effects.\n\nFeatures PLAXIS 2D, PLAXIS 2D Advanced & Ultimate \n \n\n#PROJECT AND MODEL PROPERTIES\nSelection of imperial and SI units for length, force, etc.\nSelect between plane strain and axi-symmetric models\nSelect between 6-noded and 15-noded element types\nConstants tab in Project properties\n\n\n#GEOMETRY CREATION\nCreate Borehole Tool\nSelect, Move and Array Tools\nCreate Soil Polygon, Soil Rectangle Tools\nCreate Point & Line Load Tools\nCreate Point & Line Prescribed Displacement Tools\nCreate Embedded Beam Row, Plate, Geogrid, Fixed-End Anchor, Node-to-node Anchor, Interface Tools\nCreate Line Contraction Tool\nCreate Well, Drain and Groundwater Flow Boundary Conditions Tools\nCreate Thermal Flow Boundary Condition Tool\nCreate Added Mass Tool\nTunnel Designer\nReinforcement (Rockbolts) Definition in Tunnel Designer\n\n\n#SOIL MATERIAL MODELS\nLinear elastic\nMohr-Coulomb\nHardening Soil\nHardening Soil Small Strain Stiffness\nModified cam-clay\nJointed Rock model\nNGI-ADP\nHoek-Brown, with Parameter guide\nSoft soil\nSoft Soil creep\nSekiguchi Ohta (Viscid)\nSekiguchi Ohta (Inviscid)\nUDCAM-S and Cyclic Accumulation tool\nConcrete\nUser Defined Soil Models\nUBC3D-PLM (liquefaction)\n\n\n#SOIL MATERIAL DRAINAGE TYPES\nDrained\nUndrained A\nUndrained B\nUndrained C\nNon-porous\n\n\n#STRUCTURAL ELEMENT MATERIAL TYPES\nElastic, elastoplastic & elastoplastic (M-Kappa) Plates\nElastic, elastoplastic, elastoplastic (N-Epsilon) & viscoelastic Geogrids\nElastic, elastoplastic & elastoplastic (M-Kappa) Embedded beam rows\nElastic, elastoplastic & elastoplastic with residual strength Fixed-end and Node-to-node Anchors\n\n#DYNAMIC, GROUNDWATER AND THERMAL FLOW MATERIAL PROPERTIES\nGroundwater properties, incl. soil classification systems (Hypres, USDA etc) and predefined data sets for (Approximate) Van Genuchten models for soil materials\nThermal properties for soil and structural elements (excl. embedded beam row)\nRayleigh damping for soil and structural elements\n\n\n#INITIAL CALCULATION TYPES\nK₀ procedure\nGravity loading\nField stress\nGround water flow only\n\n#DEFORMATION CALCULATION TYPES\nPlastic\nSafety\nConsolidation\nDynamic\nDynamic with consolidation\nFully coupled flow-deformation\n\n#PORE PRESSURE CALCULATION TYPES\nPhreatic level\nUse pore pressures from previous phase\nSteady state groundwater flow\nTransient groundwater flow\n\n#THERMAL CALCULATION TYPES\nIgnore temperature\nEarth gradient\nSteady state thermal flow\nUse temperatures from previous phase\nTransient thermal flow\n\n#MISCELLANEOUS FEATURES, TOOLS AND INTEROPABILITY\nSpatial variation of preconsolidation\nTunnel deconfinement\nCreate cluster field stress\nStaged construction & automatic regeneration of construction stages\nMulticore and parallel calculation\nDesign Approaches\nPseudostatic analysis\nGenerate Stratigraphy from imported CPT Logs\nSoilTest and parameter optimization tool\nSensitivity analysis and Parameter variation\nPLAXIS 2D Classic to PLAXIS 2D CONNECT Edition project converter\nPLAXIS 2D LE model import\nPLAXIS 2D to 3D Converter\nCalculation Manager\nCAD Import and Export\nCommand line input (Input, Output & SoilTest)\nCommand line autocomplete (Input, Output & SoilTest)\nCommands runner (Input, Output & SoilTest)\nMacro library and running macros (Input, Output & SoilTest)\nRemote scripting for Input, Output and SoilTest\nScripting reference\n1D Site response analysis tool\nProjectWise integration, loading from and saving to ProjectWise server\nBentley Cloud Services: personal & project portal, project association\n\n\n#TIME DEPENDENT FUNCTIONS\nTime dependent groundwater flow components for water levels, groundwater flow boundary conditions and soil clusters\nDefinition of groundwater flow functions to specify time dependent changes in head or discharge, etc.\nTime dependent thermal components for thermal flow boundary conditions and soil clusters\nDefinition of thermal flow functions to specify time dependent changes in temperature or heat flux, etc.\nDynamic components in x and y direction for point and line loads or prescribed displacements\nDefinition of Dynamic multipliers to create vibration and earthquake signals\nScaling tools, Fourier, response spectra & Arias intensity plots and drift correction for input earthquake signals\n\n#DYNAMIC BOUNDARY CONDITIONS\nViscous\nTied degrees of freedom\nCompliant base and free field boundaries\nAll nodes fixity\n\n#POSTPROCESSING & RESULTS\nVarious ways to display forces, displacements, stresses and strains in contour, vector, and iso-surface plots\nTables of results with copy, sorting and filter options\nCurve manager to plot graphs of various results across a selection of calculation phases\nLoad-Displacement curves\nCross-section tools and cross-section curves\nAutomatic and manual centerline extraction for structural forces plots of volume plates\nResulting forces view\nPlot annotations\nAnimations\nReport generator\nPrinting and saving plots & curves\nPlots & Curves of accelerations, velocities, structural forces envelopes for Dynamic phases\nCurve plots of Pseudo Spectral Acceleration, relative displacements and switching between time & frequency representations\nPlots and curves of pore pressures for phreatic level calculations\nPlots and curves of pore pressures, saturation, suction, and Darcy flux for steady state groundwater flow calculations\nPlots and curves of pore pressures, saturation, suction, and Darcy flux for transient groundwater flow or fully coupled flow deformation calculations\nPlots and curves of temperature, ice saturation and heat flux for steady state thermal flow calculations\nPlots and curves of temperature, ice saturation and heat flux for transient thermal flow or full thermo-hydro-mechanical coupled calculations\nExport of results to Paraview", "price": 355570.0, "discountamount": 17000.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": null, "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 50, "imageuri": "https://productimages.withfloats.com/actual/64dd0428642e5400011799cf.png", "tileimageuri": "https://productimages.withfloats.com/tile/64dd0428642e5400011799cf.png", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2023-08-16T17:15:18.069Z", "updatedon": "2024-04-01T12:12:50.139Z", "buyonlinelink": null, "producturl": "http://WWW.ADVEDUCARE.COM//bentley-plaxis-2d-advanced-virtuosity-annual-subscription/50", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "Bentley", "category": "Bentley Software", "tags": [ "plaxis 2d", "plaxis 3d", "Plaxis Software", "Bentley software", "Geotechnical Software" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "UniquePaymentUrl", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "64dd01af9b00660001a67174", "fptag": "EDUCAREADV", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "PLAXIS 2D Virtuosity Annual Subscription", "description": "PLAXIS 2D- (Complete Features ) Check For individual features from site\nPLAXIS 2D includes all the essential functionalities to perform everyday deformation and safety analysis for soil and rock that do not require the consideration of creep, steady state groundwater or thermal flow, consolidation analysis, or any time-dependent effects.\n\nFeatures PLAXIS 2D, PLAXIS 2D Advanced & Ultimate \n \n\n#PROJECT AND MODEL PROPERTIES\nSelection of imperial and SI units for length, force, etc.\nSelect between plane strain and axi-symmetric models\nSelect between 6-noded and 15-noded element types\nConstants tab in Project properties\n\n\n#GEOMETRY CREATION\nCreate Borehole Tool\nSelect, Move and Array Tools\nCreate Soil Polygon, Soil Rectangle Tools\nCreate Point & Line Load Tools\nCreate Point & Line Prescribed Displacement Tools\nCreate Embedded Beam Row, Plate, Geogrid, Fixed-End Anchor, Node-to-node Anchor, Interface Tools\nCreate Line Contraction Tool\nCreate Well, Drain and Groundwater Flow Boundary Conditions Tools\nCreate Thermal Flow Boundary Condition Tool\nCreate Added Mass Tool\nTunnel Designer\nReinforcement (Rockbolts) Definition in Tunnel Designer\n\n\n#SOIL MATERIAL MODELS\nLinear elastic\nMohr-Coulomb\nHardening Soil\nHardening Soil Small Strain Stiffness\nModified cam-clay\nJointed Rock model\nNGI-ADP\nHoek-Brown, with Parameter guide\nSoft soil\nSoft Soil creep\nSekiguchi Ohta (Viscid)\nSekiguchi Ohta (Inviscid)\nUDCAM-S and Cyclic Accumulation tool\nConcrete\nUser Defined Soil Models\nUBC3D-PLM (liquefaction)\n\n\n#SOIL MATERIAL DRAINAGE TYPES\nDrained\nUndrained A\nUndrained B\nUndrained C\nNon-porous\n\n\n#STRUCTURAL ELEMENT MATERIAL TYPES\nElastic, elastoplastic & elastoplastic (M-Kappa) Plates\nElastic, elastoplastic, elastoplastic (N-Epsilon) & viscoelastic Geogrids\nElastic, elastoplastic & elastoplastic (M-Kappa) Embedded beam rows\nElastic, elastoplastic & elastoplastic with residual strength Fixed-end and Node-to-node Anchors\n\n#DYNAMIC, GROUNDWATER AND THERMAL FLOW MATERIAL PROPERTIES\nGroundwater properties, incl. soil classification systems (Hypres, USDA etc) and predefined data sets for (Approximate) Van Genuchten models for soil materials\nThermal properties for soil and structural elements (excl. embedded beam row)\nRayleigh damping for soil and structural elements\n\n\n#INITIAL CALCULATION TYPES\nK₀ procedure\nGravity loading\nField stress\nGround water flow only\n\n#DEFORMATION CALCULATION TYPES\nPlastic\nSafety\nConsolidation\nDynamic\nDynamic with consolidation\nFully coupled flow-deformation\n\n#PORE PRESSURE CALCULATION TYPES\nPhreatic level\nUse pore pressures from previous phase\nSteady state groundwater flow\nTransient groundwater flow\n\n#THERMAL CALCULATION TYPES\nIgnore temperature\nEarth gradient\nSteady state thermal flow\nUse temperatures from previous phase\nTransient thermal flow\n\n#MISCELLANEOUS FEATURES, TOOLS AND INTEROPABILITY\nSpatial variation of preconsolidation\nTunnel deconfinement\nCreate cluster field stress\nStaged construction & automatic regeneration of construction stages\nMulticore and parallel calculation\nDesign Approaches\nPseudostatic analysis\nGenerate Stratigraphy from imported CPT Logs\nSoilTest and parameter optimization tool\nSensitivity analysis and Parameter variation\nPLAXIS 2D Classic to PLAXIS 2D CONNECT Edition project converter\nPLAXIS 2D LE model import\nPLAXIS 2D to 3D Converter\nCalculation Manager\nCAD Import and Export\nCommand line input (Input, Output & SoilTest)\nCommand line autocomplete (Input, Output & SoilTest)\nCommands runner (Input, Output & SoilTest)\nMacro library and running macros (Input, Output & SoilTest)\nRemote scripting for Input, Output and SoilTest\nScripting reference\n1D Site response analysis tool\nProjectWise integration, loading from and saving to ProjectWise server\nBentley Cloud Services: personal & project portal, project association\n\n\n#TIME DEPENDENT FUNCTIONS\nTime dependent groundwater flow components for water levels, groundwater flow boundary conditions and soil clusters\nDefinition of groundwater flow functions to specify time dependent changes in head or discharge, etc.\nTime dependent thermal components for thermal flow boundary conditions and soil clusters\nDefinition of thermal flow functions to specify time dependent changes in temperature or heat flux, etc.\nDynamic components in x and y direction for point and line loads or prescribed displacements\nDefinition of Dynamic multipliers to create vibration and earthquake signals\nScaling tools, Fourier, response spectra & Arias intensity plots and drift correction for input earthquake signals\n\n#DYNAMIC BOUNDARY CONDITIONS\nViscous\nTied degrees of freedom\nCompliant base and free field boundaries\nAll nodes fixity\n\n#POSTPROCESSING & RESULTS\nVarious ways to display forces, displacements, stresses and strains in contour, vector, and iso-surface plots\nTables of results with copy, sorting and filter options\nCurve manager to plot graphs of various results across a selection of calculation phases\nLoad-Displacement curves\nCross-section tools and cross-section curves\nAutomatic and manual centerline extraction for structural forces plots of volume plates\nResulting forces view\nPlot annotations\nAnimations\nReport generator\nPrinting and saving plots & curves\nPlots & Curves of accelerations, velocities, structural forces envelopes for Dynamic phases\nCurve plots of Pseudo Spectral Acceleration, relative displacements and switching between time & frequency representations\nPlots and curves of pore pressures for phreatic level calculations\nPlots and curves of pore pressures, saturation, suction, and Darcy flux for steady state groundwater flow calculations\nPlots and curves of pore pressures, saturation, suction, and Darcy flux for transient groundwater flow or fully coupled flow deformation calculations\nPlots and curves of temperature, ice saturation and heat flux for steady state thermal flow calculations\nPlots and curves of temperature, ice saturation and heat flux for transient thermal flow or full thermo-hydro-mechanical coupled calculations\nExport of results to Paraview\n", "price": 284455.0, "discountamount": 14000.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": null, "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 49, "imageuri": "https://productimages.withfloats.com/actual/64dd01bd4db8d600010ad2b3.png", "tileimageuri": "https://productimages.withfloats.com/tile/64dd01bd4db8d600010ad2b3.png", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2023-08-16T17:04:47.109Z", "updatedon": "2024-04-01T12:13:33.731Z", "buyonlinelink": null, "producturl": "http://WWW.ADVEDUCARE.COM//plaxis-2d-virtuosity-annual-subscription/49", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "Bentley", "category": "Bentley Software", "tags": [ "plaxis 2d", "plaxis 3d", "Bentley software", "BENTLEY STAAD PRO", "Geotechnical Software", "Plaxis Software" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "UniquePaymentUrl", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "64dcfe3d635f2700010a8435", "fptag": "EDUCAREADV", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "PLAXIS 3D Ultimate Virtuosity Anual Subscription", "description": "PLAXIS 3D Ultimate\nExtend the capabilities of PLAXIS 3D Advanced, to analyze the effects of vibrations in the soil, like earthquakes and moving traffic loads. You can also simulate complex hydrological conditions through time-dependent variations of water levels or flow functions on model boundaries, as well as soil boundaries.\n\nDescription\nPLAXIS 3D Ultimate\nPLAXIS 3D Advanced includes everything that is included in PLAXIS 3D, plus enhances your geotechnical design capabilities with more advanced features and material models. You can consider creep or flow-deformation coupling through consolidation analysis. Additionally, you can solve your problems faster than PLAXIS 3D, by leveraging the multicore solver.\n\nFEATURES COVERED IN PLAXIS 3D Advanced\n\n#PROJECT AND MODEL PROPERTIES\nSelection of imperial and SI units for length, force, etc.\nGEOMETRY CREATION\nCreate Borehole Tool\nSelect, Move, Rotate and Array Tools\nCreate Point, Line, Nurbs Curve and Surface Tools\nPolycurve Designer\nIntersect, Combine, Extrude, Revolve Around Axis, Loft Polycurve and Blend Surfaces Tools\nCreate Point, Line and Surface Load Tools\nCreate Point, Line and Surface Prescribed Displacement Tools\nCreate Embedded Beam, Plate, Geogrid, Fixed-End Anchor, Node-To-Node Anchor, Interface Tools\nCreate Surface Contraction Tool\nCreate Well, Line Drain, Surface Drain and Surface Groundwater Flow Boundary Condition Tools\nCreate Added Mass Tool\nCreate Moving Point and Line Load Tools\nTunnel Designer\nReinforcement (Rockbolts and Umbrella Arches) Definition in the Tunnel Designer\n\nGirder/beam Definition in the Tunnel Designer\n\nTunnel Splitting Tool\n\nDefinition of Excavation Sequence in the Tunnel Designer\n\nAutomatic Generation of Staged Construction Phases for Tunnels\n\n\n#SOIL MATERIAL MODELS\nLinear elastic\nMohr-Coulomb\nHardening Soil\nHardening Soil Small Strain Stiffness\nModified cam-clay\nJointed Rock model\nNGI-ADP\nHoek-Brown, with Parameter guide\nSoft soil\nSoft Soil creep\nSekiguchi Ohta (Viscid)\nSekiguchi Ohta (Inviscid)\nUDCAM-S and Cyclic Accumulation tool\nConcrete\nUser Defined Soil Models\n\nUBC3D-PLM (liquefaction)\n\n#SOIL MATERIAL DRAINAGE TYPES\nDrained\nUndrained A\nUndrained B\nUndrained C\nNon-porous\n\n\n#STRUCTURAL ELEMENT MATERIAL TYPES\nElastic & elastoplastic Plates\nElastic, elastoplastic, elastoplastic (N-Epsilon) & viscoelastic Geogrids\nElastic & elastoplastic Beam\nElastic & elastoplastic Embedded beam\nElastic, elastoplastic & elastoplastic with residual strength Fixed-end and Node-to-node Anchors\n\n\n#DYNAMIC, GROUNDWATER AND THERMAL FLOW MATERIAL PROPERTIES\nGroundwater properties, incl. soil classification systems (Hypres, USDA, etc.) and predefined data sets for (approximate) Van Genuchten models for soil materials\nRayleigh damping for soil and structural elements\n\n#INITIAL CALCULATION TYPES\nK₀ procedure\nGravity loading\nField stress\nGround water flow only\n\n\n#DEFORMATION CALCULATION TYPES\nPlastic\nSafety\nConsolidation\nDynamic\nDynamic with consolidation\nFully coupled flow-deformation\n\n\n#PORE PRESSURE CALCULATION TYPES\nPhreatic level\nUse pore pressures from previous phase\nSteady state groundwater flow\nTransient groundwater flow\n\n\n#MISCELLANEOUS FEATURES, TOOLS AND INTEROPABILITY\nCreate cluster field stress\nStaged construction & automatic regeneration of construction stages\nMulticore and parallel calculation\nPseudostatic analysis\nGenerate Stratigraphy from imported CPT Logs\nSoilTest and parameter optimization tool\nCalculation Manager\nCAD Import (incl. IFC, point clouds, water levels, borehole top and bottom) and Export\nCommand line input (Input, Output & SoilTest)\nCommand line autocomplete (Input, Output & SoilTest)\nCommands runner (Input, Output & SoilTest)\nMacro library and running macros (Input, Output & SoilTest)\nRemote scripting for Input, Output and SoilTest\nScripting reference\nProjectWise integration, loading from and saving to ProjectWise server\nBentley Cloud Services: personal & project portal, project association\nImport of and export to ISM\nPLAXIS 3D Coupling tool for STAAD.Pro\n\n\n#TIME DEPENDENT FUNCTIONS\nTime dependent groundwater flow components for water levels, groundwater flow boundary conditions and soil clusters\nDefinition of groundwater flow functions to specify time dependent changes in head or prescribed discharge, etc.\nDynamic components in x and y direction for point and line loads or displacements\nDefinition of Dynamic multipliers to create vibration and earthquake signals\nScaling tools, Fourier, response spectra & Arias intensity plots and drift correction for input earthquake signals\nDefinition of Movement functions to specify time dependent changes in velocity\nDYNAMIC BOUNDARY CONDITIONS\nViscous\nCompliant base and free field boundaries\nAll nodes fixity\nPOSTPROCESSING & RESULTS\nVarious ways to display forces, displacements, stresses and strains in contour, vector, and iso-surface plots\nTables of results with copy, sorting and filter options\nCurve manager to plot graphs of various results across a selection of calculation phases\nLoad-Displacement curves\nCross-section tools and cross-section curves\nAutomatic and manual centerline extraction for structural forces plots of volumes piles\nResulting forces view\nPlot annotations\nAnimations\nReport generator\nPrinting and saving plots & curves\nPlots & Curves of accelerations, velocities, structural forces envelopes for Dynamic phases\nCurve plots of Pseudo Spectral Acceleration, relative displacements and switching between time & frequency representations\nPlots and curves of pore pressures for phreatic level calculations\nPlots and curves of pore pressures, saturation, suction, and Darcy flux for steady state groundwater flow calculations\nPlots and curves of pore pressures, saturation, suction, and Darcy flux for transient groundwater flow or fully coupled flow deformation calculations\nExport of results to Paraview", "price": 1224935.0, "discountamount": 50000.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": null, "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 48, "imageuri": "https://productimages.withfloats.com/actual/64dcfe3fa673410001642930.jpeg", "tileimageuri": "https://productimages.withfloats.com/tile/64dcfe3fa673410001642930.jpeg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2023-08-16T16:50:05.605Z", "updatedon": "2024-04-01T12:15:17.078Z", "buyonlinelink": null, "producturl": "http://WWW.ADVEDUCARE.COM//plaxis-3d-ultimate-virtuosity-anual-subscription/48", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "Bentley", "category": "Bentley Software", "tags": [ "plaxis 2d", "plaxis 3d", "Plaxis Software", "Bentley software", "Geotechnical Software" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "UniquePaymentUrl", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "64dc898f7191e90001251628", "fptag": "EDUCAREADV", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "STAAD.Pro(Basic)- Annual Subscription License", "description": "Perform comprehensive analysis and design for any structure\nSTAAD is a comprehensive structural finite element analysis and design application that provides you with powerful visualization capabilities and a wide range of international design codes. Using an easy-to-use intuitive interface, engineers can automatically convert physical models into an analytical model for a more streamlined workflow while conducting structural analysis. STAAD makes it easy to integrate structural analysis into a BIM workflow and share synchronized models for multi-discipline collaboration. STAAD’s powerful analysis capabilities allow you to perform analysis on any structure exposed to static, dynamic, wind, earthquake, thermal, and moving loads.\n\nBecause every firm has different needs, there are three flexible STAAD variations: \n\nSTAAD.Pro – The most basic STAAD option including FEM analysis and physical modeling\nSTAAD.Pro Advanced – Adds more advanced and complex analysis\nStructural WorkSuite – The most popular structural applications in a single, cost-effective license\n\nFEATURES COVERED IN STAAD ADVANCED \n#MODELING\nStructure wizard enabling quick creation of models\nBuild models using input with built-in text editor\nCalculate section properties and evaluate section stresses with section wizard\nOver forty-five section libraries tailored to different industries\nPhysical and analytical modeling environments\n\n#BASIC ANALYSIS\nLinear static elastic, P-Delta, dynamic, AISC direct analysis\nFinite element analysis\nAutomated wind and seismic load generation\nAutomated load combination generation according to building codes\n\n#STRUCTURAL DESIGN\nDesign of structural steel elements\nDesign basic reinforced concrete elements\nIntegrated design of basic foundations including column footings (not all types)\nIntegrated design of basic structural steel connections (not all types)\nProduce automated steel drawings and details directly from STAAD model*\n\n#INTEROPERABILITY\nCreate macros using OpenSTAAD API to integrate with Excel or in-house programs\nIntegration with AutoPIPE for analysis of combined piping/structural framing system\n", "price": 85748.0, "discountamount": 2748.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "wind", "STAAD", "thermal", "engineers", "structure", "wide range", "earthquake", "streamlined", "BIM workflow", "moving loads", "physical models", "analytical model", "design application", "synchronized models", "structural analysis", "intuitive interface", "comprehensive analysis", "international design codes", "multi-discipline collaboration", "powerful analysis capabilities", "powerful visualization capabilities", "Pro(Basic)- Annual Subscription License", "comprehensive structural finite element analysis" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 44, "imageuri": "https://productimages.withfloats.com/actual/64dc8999642e540001175498.jpg", "tileimageuri": "https://productimages.withfloats.com/tile/64dc8999642e540001175498.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2023-08-16T08:32:15.296Z", "updatedon": "2024-04-23T08:40:09.801Z", "buyonlinelink": null, "producturl": "http://WWW.ADVEDUCARE.COM//staad-pro-basic-annual-subscription-license/44", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "Bentley Software ", "category": "Bentley Software", "tags": [ "STRUCTURAL DESIGN", "STRUCTURAL DESIGN SOFTWARE", "STAAD", "STAAD PRO", "STAAD PRO CONNECT EDITION", "BENTLEY STAAD PRO", "STAAD.Pro" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "UniquePaymentUrl", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "64dc88f66bde380001a99e24", "fptag": "EDUCAREADV", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "STAAD.Pro Advanced- Annual Subscription License", "description": "Adds more advanced and complex analysis\nPerform comprehensive analysis and design for any structure\nSTAAD is a comprehensive structural finite element analysis and design application that provides you with powerful visualization capabilities and a wide range of international design codes. Using an easy-to-use intuitive interface, engineers can automatically convert physical models into an analytical model for a more streamlined workflow while conducting structural analysis. STAAD makes it easy to integrate structural analysis into a BIM workflow and share synchronized models for multi-discipline collaboration. STAAD’s powerful analysis capabilities allow you to perform analysis on any structure exposed to static, dynamic, wind, earthquake, thermal, and moving loads.\n\nFEATURES COVERED IN STAAD ADVANCED \n#MODELING\nStructure wizard enabling quick creation of models\nBuild models using input with built-in text editor\nCalculate section properties and evaluate section stresses with section wizard\nOver forty-five section libraries tailored to different industries\nPhysical and analytical modeling environments\n\n#BASIC ANALYSIS\nLinear static elastic, P-Delta, dynamic, AISC direct analysis\nFinite element analysis\nAutomated wind and seismic load generation\nAutomated load combination generation according to building codes\n\n#STRUCTURAL DESIGN\nDesign of structural steel elements\nDesign basic reinforced concrete elements\nIntegrated design of basic foundations including column footings (not all types)\nIntegrated design of basic structural steel connections (not all types)\nProduce automated steel drawings and details directly from STAAD model*\n\n#INTEROPERABILITY\nCreate macros using OpenSTAAD API to integrate with Excel or in-house programs\nIntegration with AutoPIPE for analysis of combined piping/structural framing system\n\n#ADVANCED ANALYSIS\nNonlinear geometric and cable analysis\nEigen buckling analysis with in-depth buckling mode evaluation\nFloor spectrum analysis due to time history loading (seismic design)\nSteady state dynamic performance for vibration design\nPushover analysis (FEMA 356)\n\n#REINFORCED CONCRETE DESIGN & DETAILING\nDesign and detailing of reinforced concrete beams, columns, footings, pile caps, walls, and slabs\nDesign reports, material takeoffs, and bill of quantity\nAutomated reinforcing drawings, details, and schedules, with customizable settings\n\n", "price": 152040.0, "discountamount": 10000.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "STAAD", "complex analysis", "Pro Advanced- Annual Subscription License" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 43, "imageuri": "https://productimages.withfloats.com/actual/64dca49cae548b00013ec035.png", "tileimageuri": "https://productimages.withfloats.com/tile/64dca49cae548b00013ec035.png", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2023-08-16T08:29:42.395Z", "updatedon": "2024-04-01T12:27:52.58Z", "buyonlinelink": null, "producturl": "http://WWW.ADVEDUCARE.COM/products/staad-pro-advanced-annual-subscription-license/43", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "Bentley", "category": "Bentley Software", "tags": [ "STAAD PRO ADVANCED CONNECT EDITION", "STAAD PRO", "STRUCTURAL DESIGN", "STRUCTURAL DESIGN SOFTWARE" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "UniquePaymentUrl", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "60ceec31f83dd80001112cbf", "fptag": "EDUCAREADV", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "STAAD Foundation Advanced- A powerful Foundation Design Software", "description": "COMPREHENSIVE FOUNDATION DESIGN SOFTWARE\nFoundation Advanced provides you with a streamlined workflow through its integration with STAAD.Pro or as a stand-alone application for any type of foundation.\nGet efficient foundation design and documentation using plant-specific design tools, multiple design codes with U.S. and metric bar sizes, design optimization, and automatic drawing generation. STAAD Foundation Advanced provides you with a streamlined workflow through its integration with STAAD.Pro or as a stand-alone application. You can design virtually any type of foundation, from basic to the most complex. \nEasily model complex or simple footings, such as plant foundations supporting vertical vessels, horizontal vessels, tanks and other footings\nQuickly model common foundations such as isolated, combined, strip, pile caps, and many more \nSimplify challenging scenarios such as vibrating machine foundation, lateral analysis of piers, or mat design using FEA\nEfficiently use your structural model with the foundation model through integration with STAAD.Pro, including automatically synced changes in both models\n\nCAPABILITIES\n\n\nANALYZE GRAVITY AND LATERAL LOAD\nDesign and analyze simple or complex structures for a wide range of loading conditions, including conditions induced by gravity like dead and live loads, such as skip conditions and tilt-up walls, in combination with lateral loads like wind and seismic.\n\nANALYZE MACHINE VIBRATION AND SETTLEMENT\nAnalyze machine block foundation for dynamic loading. Leverage wizard-based input for faster FEA solids model creation, including rotating and reciprocating machines, various loading, and soil spring options. Perform in-depth analysis review using dynamic graphs and detailed formulae in reports.\n \nANALYZE STEADY STATE DYNAMIC PERFORMANCE\nIncrease performance up to 2,000 times faster with STAAD’s advanced stiffness matrix solving application. Tackle large geometric models with multiple load cases without compromising analysis quality. Achieve top-notch performance for dynamic analysis.\n\nCALCULATE PUNCHING SHEAR\nCalculate and design concrete slab/column connections for punching shear, including the effects of unbalanced joint moments.\n\nCOMPLY WITH SEISMIC REQUIREMENTS\nDesign and detail seismic force-resisting systems, generating seismic loads according to the relevant building code. Consider these forces in the design of elements and, where applicable, the design of frames and the larger structural system. Enforce the ductility requirements of the selected design code in element proportioning and detailing.\n\nDESIGN FOUNDATIONS TO INTERNATIONAL STANDARDS\nDesign a wide variety of foundations, from simple spread footings to complicated mats and specialized machinery pads. Complete your designs with confidence thanks to extensive support of international standards.\n\nDETAIL AND SCHEDULE CONCRETE REINFORCING\nProduce rebar placing drawings, including sections, plans, details, bar bending schedules, material take-offs and beam/column/footing schedules, all based on the 3D model. All schedules and drawings can be customized to adhere to your company’s standards for concrete projects.\n\nGENERATE DESIGN LOADS AND LOAD COMBINATIONS\nApply code-prescribed wind and seismic loads to the structure using built-in load generators. Calculate relevant loading parameters automatically based on the structural geometry, mass, and selected building code provisions without the need for separate hand calculations. Combine these lateral load cases with gravity and other types of loads using load combination generators.\n\nPRODUCE STRUCTURAL DESIGN DOCUMENTATION\nGenerate structural design documents including necessary plans and elevations that are used to convey the design intent. Changes made to the 3D model are automatically updated in the documentation.\nProduce structural details\nProduce detailed 2D drawings directly from design results established in the structural model. Customize the style and format of the drawings using settings offered within the software.", "price": 150077.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": null, "isarchived": false, "isavailable": false, "applicationid": null, "productindex": 32, "imageuri": "https://productimages.withfloats.com/actual/60ceec36a203ce0001cb6ea7.png", "tileimageuri": "https://productimages.withfloats.com/tile/60ceec36a203ce0001cb6ea7.png", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2021-06-20T07:20:17.951Z", "updatedon": "2023-04-12T08:00:14.599Z", "buyonlinelink": null, "producturl": "http://WWW.ADVEDUCARE.COM/products/staad-foundation-advanced-a-powerful-foundation-design-software/32", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "Bentley Systems", "category": "Bentley Software", "tags": [ "staad.pro", "STAAD FOUNDATION ADVANCED", "STRUCTURAL DESIGN SOFTWARE" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "None", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "5b6b3a6d17b6bc0566d8a0d4", "fptag": "EDUCAREADV", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "Ram Connection", "description": "RAM Connection can be used stand alone or fully integrated with RAM Structural System, RAM Elements, and STAAD.Pro® for steel connection design. Powerful connection check or design in seconds. To check a specific connection, design a single connection for multiple joints or optimize each connection in your structure, RAM Connection gets you there quicker than ever before. Integrated Modeling and Documentation Workflows The CONNECT Edition provides a common environment for comprehensive project delivery and connects users, projects, and your enterprise. With the CONNECT Edition, you now have a personal portal to access learning, communities, and project information. You can also share personal files including i-models and PDFs directly from your desktop with other users, or stage them for easy access from a Bentley mobile app, such as Structural Navigator. With the new project portal, your project teams can review project details and status, and gain visibility into project performance. With the CONNECT Edition, your project team may also wish to take advantage of the new ProjectWise® Connection Services including Project Performance Dashboards, Issues Resolution, and Scenario Services. Automated Connection Design Designing, checking, and optimizing shear, moment, gusset, splice, bracket, and base plate connections, according to AISC (ASD or LRFD), EN 1993, BS 5950 and GB 50017, has never been this automated. Designers can assign connections directly to the fi nite element model and have RAM Connection automatically consider member geometric and material properties – and analytical results – to choose the desired connection. The engineer has unlimited flexibility to check a specific connection or optimize all connections individually or in groups. Integrated Connection Design RAM Connection is the first fully integrated steel connection design and optimization tool in the industry. RAM Connection works as a stand-alone program or can be integrated with RAM Elements, STAAD.Pro, and RAM Structural System. Provides Unlimited Flexibility Your own office standards, rules of thumb, or connection expertise can be brought together into the connection designs because RAM Connection allows you to customize a vast part of the design. You can also choose from our large database of predefined connections to meet your design needs. RAM Connection goes even further by providing reports with explicit equations and references to the design standard. A myriad of connections at your fingertips whether you are designing a shear connection (shear tab, clip angle, end plate), a moment connection (flange plates, directly welded flanges), a combined connection (extended end plate) or a gusset connection for braces, RAM Connection is all you need. All design checks are done for you immediately so comparing different connection options for a particular problem is easy. Cutting-edge Graphics RAM Connection also raises the bar with its breakthrough graphics. This feature allows accurate 3D views of fit-up and clearance to ensure your structure will work and reduce on-site connection issues. Details Produced Automatically RAM Connection saves you time and increases your accuracy by generating your details directly from your designs through a DXF output file. Easily Handles Changes RAM Connection can easily handle changes that occur during the life cycle of your project. RAM Connection saves you time even when making sweeping changes to your designs. Seismic Design Included To address ever-changing and time-consuming code requirements, RAM Connection includes AISC seismic provision checks in your designs.\n \nRAM Connection at-a-glance\n \nModeling\n \nUse wide flange beams, wide flange, or HSS columns and virtually any steel section(s) for braces\nBeam-to-column connections (flange or web)\nBeam-to-girder connections\nBeam-to-beam connections\nBeam and column splices\nBrackets\nBase plate design including Anchors\nGusset plates for bracing connections\nExtensive, customizable database of connections provided\nGenerate new connections using the program interface or using Microsoft Excel\n \nControl dozens of design parameters such as:\n \n» Plate dimensions\n \n» Welds (type, size, electrode series, length, etc.)\n \n» Bolts (size, material, N, X, slip critical, hole types, etc.)\n \n» Doublers and stiffeners dimensions\n \n» Top and bottom beam copes\n \n» Sloped and skewed connections\n \nDesign\n \nDesign per AISC 360-05 or 10 (ASD or LRFD)\nDesign per AISC 341-05 or 10 seismic provisions\nMost AISC 358-05 & 10 prequalified moment connections included\nAnchor bolt design per ACI 318-08 Appendix D Design per EN 1993 (EC3) Design per GB 50017-2003\nDesign per BS5950-1:2000\nVerify existing connections\nOptimize connections with our advance algorithms or from your own pre-selected list Output and Documentation\nDesign/check one connection at a time or hundreds at once\nOutput and documentation\nOn-screen verification of connection results\n3D realistic views\n3D transparent views to avoid joint conflicts\nDXF drawing generation\nDXF export to CAD", "price": 170087.0, "discountamount": 5000.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "specific connection", "connection expertise", "RAM Structural System", "base plate connections", "Graphics RAM Connection", "Powerful connection check", "different connection options", "AISC seismic provision checks", "comprehensive project delivery", "Connection Design RAM Connection", "integrated steel connection design", "10 prequalified moment connections", "Easily Handles Changes RAM Connection", "Automated Connection Design Designing", "Details Produced Automatically RAM Connection" ], "isarchived": false, "isavailable": false, "applicationid": null, "productindex": 13, "imageuri": "https://productimages.withfloats.com/actual/60ce32e00b7e900001c1adac.jpeg", "tileimageuri": "https://productimages.withfloats.com/tile/60ce32e00b7e900001c1adac.jpeg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2018-03-15T11:25:35.21Z", "updatedon": "2023-08-16T06:04:48.758Z", "buyonlinelink": null, "producturl": "http://WWW.ADVEDUCARE.COM/products/ram-connection/13", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "Bentley Systems", "category": "Bentley Software", "tags": [], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "UniquePaymentUrl", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "5b6b3a6d17b6bc0566d8a096", "fptag": "EDUCAREADV", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "SewerGems Perpetual License- 1000 Pipes", "description": "Modeling Software for Sanitary and Combined Sewers\n \nIf building and preparing your sewer models feels like a never-ending task, SewerGEMS software is for you.\n \nSewerGEMS streamlines the modeling process, so that you have more time for solving wastewater engineering problems, such as improving capacity and limiting sewer overflows, which ultimately enable utilities to comply with sewer regulations set by regulatory agencies.\n \nFor more than three decades, SewerGEMS has provided utilities and wastewater professionals like you with advanced engineering tools to plan, design, maintain, and operate sanitary and combined sewer systems, including:\n \nEngineering decision guidance tools: Leverage SewerGEMS’ what-if scenario management tools to gain a better understanding of the behavior of your wastewater system, improving decision making and response time.\nImproved model accuracy: A well calibrated model decreases the risks of making poor decisions by ensuring that the model uses the best available data. SewerGEMS calibration tools such as SCADA integration enable you to rely on your model results.\nIncreased information mobility: SewerGEMS’ full GIS, CAD, and SCADA interoperability enables the cost-effective sharing and flow of information between utilities’ design, engineering, GIS, and operation departments, and their consultants. You can leverage the data that the utility invested in once and reuse across departments.\nSewerGEMS is a superset of SewerCAD.\n \nCAPABILITIES\n \nAllocate and estimate sanitary loads\n \nApply hydrographs, patterned loads, and unit loads using a comprehensive and customizable engineering library. Use the LoadBuilder module to leverage consumption, flow monitoring, land use, or census data in your GIS to automatically estimate and import sanitary loads for your sewer model.\nAllocate and estimate stormwater loads\n \nLoad models with wet weather runoff flows derived from precipitation using the built-in rainfall distributions or user-defined rainfall events. Runoff flows are computed using the most appropriate runoff method for the project.\nAnalyze hydraulics and combined sewer overflows\n \nEasily switch among multiple solvers according to the type of system you are analyzing: Saint Venant equations, convex/gradually varied flow solver (steady-state analysis for extreme flow conditions and extended period simulations), and rational/gradually varied flow solver.\nAnalyze hydrogen sulfide formation\n \nIdentify areas in your network that are at risk of damage from hydrogen sulfide (H2S) formation, which can lead to potential collapses if not addressed. Produce average concentration runs, display result maps of the network, and compare H2S formation according to various conditions such as temperature.\nAnalyze inlet capacities\n \nCalculate the proportion of stormwater runoff that will enter an inlet versus the proportion that will be carried downstream in a gutter or pond on the road surface. Quickly confirm that the spread of flow in a gutter doesn’t exceed design requirements.\nBuild and manage hydraulic models\n \nJumpstart the model-building process and manage your model effectively, so that you can focus on making the best engineering decisions. Leverage and import virtually any external data format, which maximizes ROI on geospatial and engineering data, and automate terrain extraction and node allocation.\nDesign and analyze culverts\n \nSelect from a library of standard culvert shapes, materials, and entrance conditions, then compute culvert headwater and tailwater elevations using calculation methodologies outlined in Hydraulic Design Series Number 5 from the U.S. Federal Highway Administration.\nDesign and analyze low impact development controls\n \nModel the effect that low impact development controls have in retaining runoff before it enters the stormwater system.\nDesign and analyze pond and outlets\n \nLeverage PondMaker’s guiding process through the confusing maze of pond design steps by following the step-by-step process that provides constant feedback on how the design is progressing. Set the maximum outflow rate, estimate storage, and check the outlet design and final design.\nDesign sanitary sewers\n \nMinimize capital investments by simply entering your design restrictions: velocities, slopes, cover depths, and pipe and manhole matching offsets. SewerCAD/SewerGEMS recommends the most cost-effective pipe sizes and invert elevations, avoiding unnecessary pipe trench excavation, while meeting design restrictions.\nDesign stormwater systems\n \nMinimize capital investments by simply entering your design restrictions: velocities, slopes, cover depths, and pipe and inlet matching offsets. The software product recommends the most cost-effective pipe sizes and invert elevations, avoiding unnecessary pipe trench excavation, while meeting design restrictions.\nSimulate water quality\n \nSimulate the generation, inflow, and transportation and treatment of any number of user-defined pollutants, such as total suspended solids or heavy metals.", "price": 892507.0, "discountamount": 10000.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "pond design steps", "design restrictions", "import sanitary loads", "extreme flow conditions", "appropriate runoff method", "scenario management tools", "advanced engineering tools", "SewerGEMS calibration tools", "Produce average concentration", "analyze low impact development", "wastewater engineering problems", "low impact development controls", "customizable engineering library", "Hydraulic Design Series Number 5", "unnecessary pipe trench excavation" ], "isarchived": false, "isavailable": false, "applicationid": null, "productindex": 6, "imageuri": "https://productimages.withfloats.com/actual/5aaa54e0c9e1f50adc6038d1.jpg", "tileimageuri": "https://productimages.withfloats.com/tile/5aaa54e0c9e1f50adc6038d1.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2018-03-15T11:11:29.006Z", "updatedon": "2023-08-16T06:19:19.92Z", "buyonlinelink": null, "producturl": "http://WWW.ADVEDUCARE.COM/products/sewergems-perpetual-license-1000-pipes/6", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "Bentley Systems", "category": "Bentley Software", "tags": [ "openflow", "SewerGEMS" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "UniquePaymentUrl", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false } ], "hasmoreitems": false, "isapirequest": false, "totalresults": 27, "query": null, "floatingpoint": null }