Home> Products> advanced material models

{ "products": [ { "_id": "64dcfe3d635f2700010a8435", "fptag": "EDUCAREADV", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "PLAXIS 3D Ultimate Virtuosity Anual Subscription", "description": "PLAXIS 3D Ultimate\nExtend the capabilities of PLAXIS 3D Advanced, to analyze the effects of vibrations in the soil, like earthquakes and moving traffic loads. You can also simulate complex hydrological conditions through time-dependent variations of water levels or flow functions on model boundaries, as well as soil boundaries.\n\nDescription\nPLAXIS 3D Ultimate\nPLAXIS 3D Advanced includes everything that is included in PLAXIS 3D, plus enhances your geotechnical design capabilities with more advanced features and material models. You can consider creep or flow-deformation coupling through consolidation analysis. Additionally, you can solve your problems faster than PLAXIS 3D, by leveraging the multicore solver.\n\nFEATURES COVERED IN PLAXIS 3D Advanced\n\n#PROJECT AND MODEL PROPERTIES\nSelection of imperial and SI units for length, force, etc.\nGEOMETRY CREATION\nCreate Borehole Tool\nSelect, Move, Rotate and Array Tools\nCreate Point, Line, Nurbs Curve and Surface Tools\nPolycurve Designer\nIntersect, Combine, Extrude, Revolve Around Axis, Loft Polycurve and Blend Surfaces Tools\nCreate Point, Line and Surface Load Tools\nCreate Point, Line and Surface Prescribed Displacement Tools\nCreate Embedded Beam, Plate, Geogrid, Fixed-End Anchor, Node-To-Node Anchor, Interface Tools\nCreate Surface Contraction Tool\nCreate Well, Line Drain, Surface Drain and Surface Groundwater Flow Boundary Condition Tools\nCreate Added Mass Tool\nCreate Moving Point and Line Load Tools\nTunnel Designer\nReinforcement (Rockbolts and Umbrella Arches) Definition in the Tunnel Designer\n\nGirder/beam Definition in the Tunnel Designer\n\nTunnel Splitting Tool\n\nDefinition of Excavation Sequence in the Tunnel Designer\n\nAutomatic Generation of Staged Construction Phases for Tunnels\n\n\n#SOIL MATERIAL MODELS\nLinear elastic\nMohr-Coulomb\nHardening Soil\nHardening Soil Small Strain Stiffness\nModified cam-clay\nJointed Rock model\nNGI-ADP\nHoek-Brown, with Parameter guide\nSoft soil\nSoft Soil creep\nSekiguchi Ohta (Viscid)\nSekiguchi Ohta (Inviscid)\nUDCAM-S and Cyclic Accumulation tool\nConcrete\nUser Defined Soil Models\n\nUBC3D-PLM (liquefaction)\n\n#SOIL MATERIAL DRAINAGE TYPES\nDrained\nUndrained A\nUndrained B\nUndrained C\nNon-porous\n\n\n#STRUCTURAL ELEMENT MATERIAL TYPES\nElastic & elastoplastic Plates\nElastic, elastoplastic, elastoplastic (N-Epsilon) & viscoelastic Geogrids\nElastic & elastoplastic Beam\nElastic & elastoplastic Embedded beam\nElastic, elastoplastic & elastoplastic with residual strength Fixed-end and Node-to-node Anchors\n\n\n#DYNAMIC, GROUNDWATER AND THERMAL FLOW MATERIAL PROPERTIES\nGroundwater properties, incl. soil classification systems (Hypres, USDA, etc.) and predefined data sets for (approximate) Van Genuchten models for soil materials\nRayleigh damping for soil and structural elements\n\n#INITIAL CALCULATION TYPES\nK₀ procedure\nGravity loading\nField stress\nGround water flow only\n\n\n#DEFORMATION CALCULATION TYPES\nPlastic\nSafety\nConsolidation\nDynamic\nDynamic with consolidation\nFully coupled flow-deformation\n\n\n#PORE PRESSURE CALCULATION TYPES\nPhreatic level\nUse pore pressures from previous phase\nSteady state groundwater flow\nTransient groundwater flow\n\n\n#MISCELLANEOUS FEATURES, TOOLS AND INTEROPABILITY\nCreate cluster field stress\nStaged construction & automatic regeneration of construction stages\nMulticore and parallel calculation\nPseudostatic analysis\nGenerate Stratigraphy from imported CPT Logs\nSoilTest and parameter optimization tool\nCalculation Manager\nCAD Import (incl. IFC, point clouds, water levels, borehole top and bottom) and Export\nCommand line input (Input, Output & SoilTest)\nCommand line autocomplete (Input, Output & SoilTest)\nCommands runner (Input, Output & SoilTest)\nMacro library and running macros (Input, Output & SoilTest)\nRemote scripting for Input, Output and SoilTest\nScripting reference\nProjectWise integration, loading from and saving to ProjectWise server\nBentley Cloud Services: personal & project portal, project association\nImport of and export to ISM\nPLAXIS 3D Coupling tool for STAAD.Pro\n\n\n#TIME DEPENDENT FUNCTIONS\nTime dependent groundwater flow components for water levels, groundwater flow boundary conditions and soil clusters\nDefinition of groundwater flow functions to specify time dependent changes in head or prescribed discharge, etc.\nDynamic components in x and y direction for point and line loads or displacements\nDefinition of Dynamic multipliers to create vibration and earthquake signals\nScaling tools, Fourier, response spectra & Arias intensity plots and drift correction for input earthquake signals\nDefinition of Movement functions to specify time dependent changes in velocity\nDYNAMIC BOUNDARY CONDITIONS\nViscous\nCompliant base and free field boundaries\nAll nodes fixity\nPOSTPROCESSING & RESULTS\nVarious ways to display forces, displacements, stresses and strains in contour, vector, and iso-surface plots\nTables of results with copy, sorting and filter options\nCurve manager to plot graphs of various results across a selection of calculation phases\nLoad-Displacement curves\nCross-section tools and cross-section curves\nAutomatic and manual centerline extraction for structural forces plots of volumes piles\nResulting forces view\nPlot annotations\nAnimations\nReport generator\nPrinting and saving plots & curves\nPlots & Curves of accelerations, velocities, structural forces envelopes for Dynamic phases\nCurve plots of Pseudo Spectral Acceleration, relative displacements and switching between time & frequency representations\nPlots and curves of pore pressures for phreatic level calculations\nPlots and curves of pore pressures, saturation, suction, and Darcy flux for steady state groundwater flow calculations\nPlots and curves of pore pressures, saturation, suction, and Darcy flux for transient groundwater flow or fully coupled flow deformation calculations\nExport of results to Paraview", "price": 1224935.0, "discountamount": 50000.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": null, "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 48, "imageuri": "https://productimages.withfloats.com/actual/64dcfe3fa673410001642930.jpeg", "tileimageuri": "https://productimages.withfloats.com/tile/64dcfe3fa673410001642930.jpeg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2023-08-16T16:50:05.605Z", "updatedon": "2024-04-01T12:15:17.078Z", "buyonlinelink": null, "producturl": "http://WWW.ADVEDUCARE.COM/products/plaxis-3d-ultimate-virtuosity-anual-subscription/48", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "Bentley", "category": "Bentley Software", "tags": [ "plaxis 2d", "plaxis 3d", "Plaxis Software", "Bentley software", "Geotechnical Software" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "UniquePaymentUrl", "producttype": "products", "hsncode": null, "gstslab": 0.001, "isnotforsale": false }, { "_id": "64dcc9b39b00660001a67036", "fptag": "EDUCAREADV", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "PLAXIS 3D Advanced Virtuosity Anual Subscription ", "description": "PLAXIS 3D Advanced\nPLAXIS 3D Advanced includes everything that is included in PLAXIS 3D, plus enhances your geotechnical design capabilities with more advanced features and material models. You can consider creep or flow-deformation coupling through consolidation analysis. Additionally, you can solve your problems faster than PLAXIS 3D, by leveraging the multicore solver.\n\nFEATURES COVERED IN PLAXIS 3D Advanced\n\n#PROJECT AND MODEL PROPERTIES\nSelection of imperial and SI units for length, force, etc.\nGEOMETRY CREATION\nCreate Borehole Tool\nSelect, Move, Rotate and Array Tools\nCreate Point, Line, Nurbs Curve and Surface Tools\nPolycurve Designer\nIntersect, Combine, Extrude, Revolve Around Axis, Loft Polycurve and Blend Surfaces Tools\nCreate Point, Line and Surface Load Tools\nCreate Point, Line and Surface Prescribed Displacement Tools\nCreate Embedded Beam, Plate, Geogrid, Fixed-End Anchor, Node-To-Node Anchor, Interface Tools\nCreate Surface Contraction Tool\nCreate Well, Line Drain, Surface Drain and Surface Groundwater Flow Boundary Condition Tools\nCreate Added Mass Tool\nCreate Moving Point and Line Load Tools\nTunnel Designer\nReinforcement (Rockbolts and Umbrella Arches) Definition in the Tunnel Designer\n\nGirder/beam Definition in the Tunnel Designer\n\nTunnel Splitting Tool\n\nDefinition of Excavation Sequence in the Tunnel Designer\n\nAutomatic Generation of Staged Construction Phases for Tunnels\n\n\n#SOIL MATERIAL MODELS\nLinear elastic\nMohr-Coulomb\nHardening Soil\nHardening Soil Small Strain Stiffness\nModified cam-clay\nJointed Rock model\nNGI-ADP\nHoek-Brown, with Parameter guide\nSoft soil\nSoft Soil creep\nSekiguchi Ohta (Viscid)\nSekiguchi Ohta (Inviscid)\nUDCAM-S and Cyclic Accumulation tool\nConcrete\nUser Defined Soil Models", "price": 999149.0, "discountamount": 45000.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "Plate", "length", "Viscid", "Combine", "Extrude", "PROJECT", "Tunnels", "Geogrid", "imperial", "problems", "Concrete", "SI units", "Rockbolts", "Intersect", "Selection", "Mass Tool", "Line Drain", "everything", "Node Anchor", "Nurbs Curve", "Array Tools", "Create Point", "Mohr-Coulomb", "Moving Point", "Borehole Tool", "Embedded Beam", "Surface Drain", "Surface Tools", "Sekiguchi Ohta", "Loft Polycurve", "Umbrella Arches", "Soft Soil creep", "Interface Tools", "material models", "Parameter guide", "flow-deformation", "Fixed-End Anchor", "MODEL PROPERTIES", "multicore solver", "advanced features", "GEOMETRY CREATION", "Surface Load Tools", "Polycurve Designer", "NGI-ADP Hoek-Brown", "Excavation Sequence", "Blend Surfaces Tools", "Automatic Generation", "consolidation analysis", "Girder/beam Definition", "Surface Contraction Tool", "Cyclic Accumulation tool", "User Defined Soil Models", "Staged Construction Phases", "cam-clay Jointed Rock model", "geotechnical design capabilities", "Surface Prescribed Displacement Tools", "Tunnel Designer Tunnel Splitting Tool", "Hardening Soil Small Strain Stiffness", "Line Load Tools Tunnel Designer Reinforcement", "PLAXIS 3D Advanced Virtuosity Anual Subscription", "Surface Groundwater Flow Boundary Condition Tools" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 47, "imageuri": "https://productimages.withfloats.com/actual/64dcc9bc5fd983000138bb55.jpeg", "tileimageuri": "https://productimages.withfloats.com/tile/64dcc9bc5fd983000138bb55.jpeg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2023-08-16T13:05:55.539Z", "updatedon": "2024-04-01T12:16:53.077Z", "buyonlinelink": null, "producturl": "http://WWW.ADVEDUCARE.COM/products/plaxis-3d-advanced-virtuosity-anual-subscription-/47", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "Bentley ", "category": "Bentley Software", "tags": [ "plaxis 2d", "plaxis 3d", "Plaxis Software", "Plaxis 3d", "Bentley software", "BENTLEY STAAD PRO" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "UniquePaymentUrl", "producttype": "products", "hsncode": null, "gstslab": 0.001, "isnotforsale": false }, { "_id": "64dc88f66bde380001a99e24", "fptag": "EDUCAREADV", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "STAAD.Pro Advanced- Annual Subscription License", "description": "Adds more advanced and complex analysis\nPerform comprehensive analysis and design for any structure\nSTAAD is a comprehensive structural finite element analysis and design application that provides you with powerful visualization capabilities and a wide range of international design codes. Using an easy-to-use intuitive interface, engineers can automatically convert physical models into an analytical model for a more streamlined workflow while conducting structural analysis. STAAD makes it easy to integrate structural analysis into a BIM workflow and share synchronized models for multi-discipline collaboration. STAAD’s powerful analysis capabilities allow you to perform analysis on any structure exposed to static, dynamic, wind, earthquake, thermal, and moving loads.\n\nFEATURES COVERED IN STAAD ADVANCED \n#MODELING\nStructure wizard enabling quick creation of models\nBuild models using input with built-in text editor\nCalculate section properties and evaluate section stresses with section wizard\nOver forty-five section libraries tailored to different industries\nPhysical and analytical modeling environments\n\n#BASIC ANALYSIS\nLinear static elastic, P-Delta, dynamic, AISC direct analysis\nFinite element analysis\nAutomated wind and seismic load generation\nAutomated load combination generation according to building codes\n\n#STRUCTURAL DESIGN\nDesign of structural steel elements\nDesign basic reinforced concrete elements\nIntegrated design of basic foundations including column footings (not all types)\nIntegrated design of basic structural steel connections (not all types)\nProduce automated steel drawings and details directly from STAAD model*\n\n#INTEROPERABILITY\nCreate macros using OpenSTAAD API to integrate with Excel or in-house programs\nIntegration with AutoPIPE for analysis of combined piping/structural framing system\n\n#ADVANCED ANALYSIS\nNonlinear geometric and cable analysis\nEigen buckling analysis with in-depth buckling mode evaluation\nFloor spectrum analysis due to time history loading (seismic design)\nSteady state dynamic performance for vibration design\nPushover analysis (FEMA 356)\n\n#REINFORCED CONCRETE DESIGN & DETAILING\nDesign and detailing of reinforced concrete beams, columns, footings, pile caps, walls, and slabs\nDesign reports, material takeoffs, and bill of quantity\nAutomated reinforcing drawings, details, and schedules, with customizable settings\n\n", "price": 152040.0, "discountamount": 10000.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "STAAD", "complex analysis", "Pro Advanced- Annual Subscription License" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 43, "imageuri": "https://productimages.withfloats.com/actual/64dca49cae548b00013ec035.png", "tileimageuri": "https://productimages.withfloats.com/tile/64dca49cae548b00013ec035.png", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2023-08-16T08:29:42.395Z", "updatedon": "2024-04-01T12:27:52.58Z", "buyonlinelink": null, "producturl": "http://WWW.ADVEDUCARE.COM/products/staad-pro-advanced-annual-subscription-license/43", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "Bentley", "category": "Bentley Software", "tags": [ "STAAD PRO ADVANCED CONNECT EDITION", "STAAD PRO", "STRUCTURAL DESIGN", "STRUCTURAL DESIGN SOFTWARE" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "UniquePaymentUrl", "producttype": "products", "hsncode": null, "gstslab": 0.001, "isnotforsale": false }, { "_id": "64dc81d230ccad00013c8648", "fptag": "EDUCAREADV", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "PLAXIS 3D-Academic Bundle", "description": "Plaxis 3D is a geotechnical engineering software developed by Bentley Systems that is used for the analysis and simulation of complex 3D geotechnical problems. It's widely used by engineers and geotechnical professionals to model and analyze various soil and rock behavior scenarios. Here are some of the key features of Plaxis 3D:\n\n#Geotechnical Analysis: \nPlaxis 3D allows for the comprehensive analysis of geotechnical problems involving soil-structure interaction, consolidation, stress and deformation, groundwater flow, and more.\n\n#3D Modeling: \nThe software specializes in three-dimensional modeling, enabling users to accurately simulate complex geometries, soil layers, structures, and construction sequences.\n\n#Material Models: \nPlaxis 3D offers a variety of material models to simulate the behavior of soils, rocks, and other geotechnical materials under different loading conditions.\n\n#Boundary Conditions: \nUsers can define various boundary conditions including fixed, prescribed displacement, or staged construction sequences to simulate real-world scenarios accurately.\n\n#Finite Element Analysis: \nThe software uses the finite element method to discretize and analyze complex geotechnical problems, allowing for accurate representation of soil behavior.\n\n#Soil-Structure Interaction: \nPlaxis 3D facilitates the modeling of interactions between soil and structures, including retaining walls, foundations, tunnels, and excavations.\n\n#Excavation and Construction Sequences: \nEngineers can simulate construction and excavation processes, studying the behavior of soil and structures during each stage of the project.\n\n#Dynamic Analysis: \nThe software can perform dynamic analyses to study the effects of seismic loads, vibrations, and other dynamic forces on soil-structure systems.\n\n#Groundwater Flow: \nPlaxis 3D can model groundwater flow and its impact on soil behavior, helping to assess factors such as pore pressure buildup and drainage conditions.\n\n#Meshing: \nThe software provides advanced meshing capabilities to create a finite element mesh that accurately represents the geometry and material interfaces of the problem.\n\n#Visualization: \nPlaxis 3D offers visualization tools to help users understand the behavior of the geotechnical system, including deformation, stress distribution, and groundwater flow paths.\n\n#Geosynthetic and Reinforcement Modeling: \nUsers can model the behavior of geosynthetic materials, reinforcements, and geogrids to study their impact on soil stability and behavior.\n\n#Parametric Studies: \nEngineers can perform parametric studies by varying input parameters to analyze how changes in material properties, geometries, or loading conditions affect the system's response.\n\n#Results and Output: \nThe software provides comprehensive output and reporting capabilities, including graphs, contour plots, and tables that help in interpreting and communicating analysis results.\n\n#Import and Export: \nPlaxis 3D supports data exchange with other software applications, enabling users to import geometries from CAD programs and export results to further analysis tools.\n\n#Tunneling and Deep Excavations: \nThe software is particularly well-suited\n", "price": 1345860.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "users", "mining", "stability", "tunneling", "foundations", "embankments", "excavations", "deformation", "geomechanics", "rock mechanics", "geotechnical risk", "trusted computation", "geotechnical engineers", "geoengineering projects", "subsurface environments", "finite element analysis", "geo-engineering projects", "geotechnical engineering", "PLAXIS 3D-Academic Bundle", "CAD-like drawing capabilities", "user-friendly, finite element package" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 37, "imageuri": "https://productimages.withfloats.com/actual/64dc81d44db8d600010a99c7.png", "tileimageuri": "https://productimages.withfloats.com/tile/64dc81d44db8d600010a99c7.png", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2023-08-16T07:59:14.829Z", "updatedon": "2023-08-16T19:15:29.975Z", "buyonlinelink": null, "producturl": "http://WWW.ADVEDUCARE.COM/products/plaxis-3d-academic-bundle/37", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "Bently", "category": "Bentley Software", "tags": [ "Geotechnical Software", "BENTLEY SYSTEMS", "plaxis 3d", "plaxis 2d", "Bentley software" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "None", "producttype": "products", "hsncode": null, "gstslab": 0.001, "isnotforsale": false }, { "_id": "60ceeda10f1ecb0001228fcb", "fptag": "EDUCAREADV", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "OpenBridge Designer-Make your Bridge Design Easy!", "description": "THE APPLICATION CONSOLIDATES THE MODELING CAPABILITIES OF OPENBRIDGE MODELER AND THE ANALYSIS AND DESIGN FEATURES OF LEAP BRIDGE CONCRETE, LEAP BRIDGE STEEL, RM BRIDGE, RM BRIDGE ADVANCED AND RM BRIDGE ENTERPRISE TO MEET THE DESIGN AND CONSTRUCTION NEEDS OF ALL TYPES OF BRIDGES. OPENBRIDGE DESIGNER-MAKE YOUR BRIDGE DESIGN EASY!\n\nWith OpenBridge Designer, you have the advantage of using a single comprehensive package from beginning to end of any bridge design project. You can use one product to create an interoperable physical and analytical model for both steel and concrete bridges that can be utilized throughout the lifecycle of the bridge. OpenBridge Designer uses bridge information modelling (BrIM), the advanced methodology for the bridge design and construction industry.\n\n\nWe are pleased to announce the consolidation of Bentley’s bridge software, forming the new OpenBridge Designer CONNECT Edition. The application consolidates the modeling capabilities of OpenBridge Modeler and the analysis and design features of LEAP Bridge Concrete, LEAP Bridge Steel, RM Bridge, RM Bridge Advanced and RM Bridge Enterprise to meet the design and construction needs of all types of bridges.\n\nWith OpenBridge Designer, you have the advantage of using a single comprehensive package from beginning to end of any bridge design project. You can use one product to create an interoperable physical and analytical model for both steel and concrete bridges that can be utilized throughout the lifecycle of the bridge. OpenBridge Designer uses bridge information modelling (BrIM), the advanced methodology for the bridge design and construction industry.\n\n\nCAPABILITIES\n\n\nANALYZE, DESIGN, AND RATE BRIDGES\nStreamline bridge modeling, analysis, and load-rating for both existing and new bridges with an integrated toolset. Leverage various international design code specifications and rating methodologies for verification.\nCAPTURE ROADWAY GEOMETRY AND TOPOGRAPHY\nReuse civil data obtained directly from Bentley road products such as GEOPAK, Bentley InRoads, or MXROAD, and import roadway information and ground data from LandXML files.\nCOORDINATE MULTI-DISCIPLINE BRIDGE TEAMS\nExchange project information including bridge geometry, materials, loads, prestressing strand pattern, and shear reinforcement to improve decision making. Streamline engineering content management with real-time collaboration and share, reuse, and repurpose data throughout the bridge lifecycle to minimize risk of design error and construction issues.\nDESIGN AND ANALYZE CONCRETE BRIDGES\nIntelligently manage your data and streamline the process of modeling, analysis, design code checking, detailed design reports, and automated drawings. Support everyday concrete bridges of all types, including precast and cast-in-place, reinforced, pre-tensioned, and post-tensioned. Support multiple design codes, including US AASHTO LRFD and LFD, Canadian CHBDC, and Indian IRC Working Stress and Limit States Design.\nDESIGN AND ANALYZE STEEL BRIDGES\nModel, design, analyze, and load-rate and optimize steel I-girder and tub-girder bridges using powerful analysis techniques such as Finite Element Modeling (FEM) and Response Spectrum Analysis, according to AASHTO LRFD Bridge Design specifications.\nGENERATE BRIDGE PROJECT DELIVERABLES\nGenerate detailed reports. Create 3D models and 2D drawings for sections, elevations, and framing plans.\nInteroperate with detailing applications\nDevelop detailed rebar designs, including bar marks, schedules, quantities, and drawings by connecting to ProStructures.\nMANAGE BRIDGE PROJECT CHANGES\nRespond to project changes by effortlessly updating the intelligent bridge model and leveraging built-in parametric relationships between bridge components.\nPERFORM BRIDGE CLASH DETECTION\nMitigate risk by performing conflict analysis of the bridge structure with existing infrastructure to save time, eliminate building errors, and reduce project costs. View clashes in 3D or in table format. Detect clashes with reinforcing steel and other embedments. Check for required minimum clearances between adjacent structures and roadways.\nPUBLISH I-MODELS\n​Exchange project models and information using i-models. With i-models, you can implement unique and powerful workflows for information sharing, distribution, and design review. These workflows can be further enhanced using ProjectWise and other products and services that leverage the power of i-models.\nSEQUENCE CONSTRUCTION AND PHASING\nInvestigate the different stages in stage-wise construction – comparing results, detecting the relevant states, and producing result envelopes for proof checking. Account for creep, shrinkage, and relaxation and solve problems before construction begins.\nVISUALIZE BRIDGE DESIGNS\nExperience instantaneous 3D visualization of the bridge superstructure and substructure. Visualize designs and rapidly verify modeling input as you work. View in-profile, elevation, and cross-section views with solid and transparent view options to help explore areas with complex geometry.", "price": 1037167.0, "discountamount": 103717.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": null, "isarchived": false, "isavailable": false, "applicationid": null, "productindex": 33, "imageuri": "https://productimages.withfloats.com/actual/60ceeda349b34500012df7b4.jpg", "tileimageuri": "https://productimages.withfloats.com/tile/60ceeda349b34500012df7b4.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2021-06-20T07:26:25.512Z", "updatedon": "2023-04-12T07:05:58.3Z", "buyonlinelink": null, "producturl": "http://WWW.ADVEDUCARE.COM/products/openbridge-designer-make-your-bridge-design-easy-/33", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "Bentley Systems", "category": "Bentley Software", "tags": [ "Open Bridge Designer", "OpenBridge", "Bentley system" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "None", "producttype": "products", "hsncode": null, "gstslab": 0.001, "isnotforsale": false }, { "_id": "60ceec31f83dd80001112cbf", "fptag": "EDUCAREADV", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "STAAD Foundation Advanced- A powerful Foundation Design Software", "description": "COMPREHENSIVE FOUNDATION DESIGN SOFTWARE\nFoundation Advanced provides you with a streamlined workflow through its integration with STAAD.Pro or as a stand-alone application for any type of foundation.\nGet efficient foundation design and documentation using plant-specific design tools, multiple design codes with U.S. and metric bar sizes, design optimization, and automatic drawing generation. STAAD Foundation Advanced provides you with a streamlined workflow through its integration with STAAD.Pro or as a stand-alone application. You can design virtually any type of foundation, from basic to the most complex. \nEasily model complex or simple footings, such as plant foundations supporting vertical vessels, horizontal vessels, tanks and other footings\nQuickly model common foundations such as isolated, combined, strip, pile caps, and many more \nSimplify challenging scenarios such as vibrating machine foundation, lateral analysis of piers, or mat design using FEA\nEfficiently use your structural model with the foundation model through integration with STAAD.Pro, including automatically synced changes in both models\n\nCAPABILITIES\n\n\nANALYZE GRAVITY AND LATERAL LOAD\nDesign and analyze simple or complex structures for a wide range of loading conditions, including conditions induced by gravity like dead and live loads, such as skip conditions and tilt-up walls, in combination with lateral loads like wind and seismic.\n\nANALYZE MACHINE VIBRATION AND SETTLEMENT\nAnalyze machine block foundation for dynamic loading. Leverage wizard-based input for faster FEA solids model creation, including rotating and reciprocating machines, various loading, and soil spring options. Perform in-depth analysis review using dynamic graphs and detailed formulae in reports.\n \nANALYZE STEADY STATE DYNAMIC PERFORMANCE\nIncrease performance up to 2,000 times faster with STAAD’s advanced stiffness matrix solving application. Tackle large geometric models with multiple load cases without compromising analysis quality. Achieve top-notch performance for dynamic analysis.\n\nCALCULATE PUNCHING SHEAR\nCalculate and design concrete slab/column connections for punching shear, including the effects of unbalanced joint moments.\n\nCOMPLY WITH SEISMIC REQUIREMENTS\nDesign and detail seismic force-resisting systems, generating seismic loads according to the relevant building code. Consider these forces in the design of elements and, where applicable, the design of frames and the larger structural system. Enforce the ductility requirements of the selected design code in element proportioning and detailing.\n\nDESIGN FOUNDATIONS TO INTERNATIONAL STANDARDS\nDesign a wide variety of foundations, from simple spread footings to complicated mats and specialized machinery pads. Complete your designs with confidence thanks to extensive support of international standards.\n\nDETAIL AND SCHEDULE CONCRETE REINFORCING\nProduce rebar placing drawings, including sections, plans, details, bar bending schedules, material take-offs and beam/column/footing schedules, all based on the 3D model. All schedules and drawings can be customized to adhere to your company’s standards for concrete projects.\n\nGENERATE DESIGN LOADS AND LOAD COMBINATIONS\nApply code-prescribed wind and seismic loads to the structure using built-in load generators. Calculate relevant loading parameters automatically based on the structural geometry, mass, and selected building code provisions without the need for separate hand calculations. Combine these lateral load cases with gravity and other types of loads using load combination generators.\n\nPRODUCE STRUCTURAL DESIGN DOCUMENTATION\nGenerate structural design documents including necessary plans and elevations that are used to convey the design intent. Changes made to the 3D model are automatically updated in the documentation.\nProduce structural details\nProduce detailed 2D drawings directly from design results established in the structural model. Customize the style and format of the drawings using settings offered within the software.", "price": 150077.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": null, "isarchived": false, "isavailable": false, "applicationid": null, "productindex": 32, "imageuri": "https://productimages.withfloats.com/actual/60ceec36a203ce0001cb6ea7.png", "tileimageuri": "https://productimages.withfloats.com/tile/60ceec36a203ce0001cb6ea7.png", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2021-06-20T07:20:17.951Z", "updatedon": "2023-04-12T08:00:14.599Z", "buyonlinelink": null, "producturl": "http://WWW.ADVEDUCARE.COM/products/staad-foundation-advanced-a-powerful-foundation-design-software/32", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "Bentley Systems", "category": "Bentley Software", "tags": [ "staad.pro", "STAAD FOUNDATION ADVANCED", "STRUCTURAL DESIGN SOFTWARE" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "None", "producttype": "products", "hsncode": null, "gstslab": 0.001, "isnotforsale": false }, { "_id": "5b6b3a6d17b6bc0566d8a096", "fptag": "EDUCAREADV", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "SewerGems Perpetual License- 1000 Pipes", "description": "Modeling Software for Sanitary and Combined Sewers\n \nIf building and preparing your sewer models feels like a never-ending task, SewerGEMS software is for you.\n \nSewerGEMS streamlines the modeling process, so that you have more time for solving wastewater engineering problems, such as improving capacity and limiting sewer overflows, which ultimately enable utilities to comply with sewer regulations set by regulatory agencies.\n \nFor more than three decades, SewerGEMS has provided utilities and wastewater professionals like you with advanced engineering tools to plan, design, maintain, and operate sanitary and combined sewer systems, including:\n \nEngineering decision guidance tools: Leverage SewerGEMS’ what-if scenario management tools to gain a better understanding of the behavior of your wastewater system, improving decision making and response time.\nImproved model accuracy: A well calibrated model decreases the risks of making poor decisions by ensuring that the model uses the best available data. SewerGEMS calibration tools such as SCADA integration enable you to rely on your model results.\nIncreased information mobility: SewerGEMS’ full GIS, CAD, and SCADA interoperability enables the cost-effective sharing and flow of information between utilities’ design, engineering, GIS, and operation departments, and their consultants. You can leverage the data that the utility invested in once and reuse across departments.\nSewerGEMS is a superset of SewerCAD.\n \nCAPABILITIES\n \nAllocate and estimate sanitary loads\n \nApply hydrographs, patterned loads, and unit loads using a comprehensive and customizable engineering library. Use the LoadBuilder module to leverage consumption, flow monitoring, land use, or census data in your GIS to automatically estimate and import sanitary loads for your sewer model.\nAllocate and estimate stormwater loads\n \nLoad models with wet weather runoff flows derived from precipitation using the built-in rainfall distributions or user-defined rainfall events. Runoff flows are computed using the most appropriate runoff method for the project.\nAnalyze hydraulics and combined sewer overflows\n \nEasily switch among multiple solvers according to the type of system you are analyzing: Saint Venant equations, convex/gradually varied flow solver (steady-state analysis for extreme flow conditions and extended period simulations), and rational/gradually varied flow solver.\nAnalyze hydrogen sulfide formation\n \nIdentify areas in your network that are at risk of damage from hydrogen sulfide (H2S) formation, which can lead to potential collapses if not addressed. Produce average concentration runs, display result maps of the network, and compare H2S formation according to various conditions such as temperature.\nAnalyze inlet capacities\n \nCalculate the proportion of stormwater runoff that will enter an inlet versus the proportion that will be carried downstream in a gutter or pond on the road surface. Quickly confirm that the spread of flow in a gutter doesn’t exceed design requirements.\nBuild and manage hydraulic models\n \nJumpstart the model-building process and manage your model effectively, so that you can focus on making the best engineering decisions. Leverage and import virtually any external data format, which maximizes ROI on geospatial and engineering data, and automate terrain extraction and node allocation.\nDesign and analyze culverts\n \nSelect from a library of standard culvert shapes, materials, and entrance conditions, then compute culvert headwater and tailwater elevations using calculation methodologies outlined in Hydraulic Design Series Number 5 from the U.S. Federal Highway Administration.\nDesign and analyze low impact development controls\n \nModel the effect that low impact development controls have in retaining runoff before it enters the stormwater system.\nDesign and analyze pond and outlets\n \nLeverage PondMaker’s guiding process through the confusing maze of pond design steps by following the step-by-step process that provides constant feedback on how the design is progressing. Set the maximum outflow rate, estimate storage, and check the outlet design and final design.\nDesign sanitary sewers\n \nMinimize capital investments by simply entering your design restrictions: velocities, slopes, cover depths, and pipe and manhole matching offsets. SewerCAD/SewerGEMS recommends the most cost-effective pipe sizes and invert elevations, avoiding unnecessary pipe trench excavation, while meeting design restrictions.\nDesign stormwater systems\n \nMinimize capital investments by simply entering your design restrictions: velocities, slopes, cover depths, and pipe and inlet matching offsets. The software product recommends the most cost-effective pipe sizes and invert elevations, avoiding unnecessary pipe trench excavation, while meeting design restrictions.\nSimulate water quality\n \nSimulate the generation, inflow, and transportation and treatment of any number of user-defined pollutants, such as total suspended solids or heavy metals.", "price": 892507.0, "discountamount": 10000.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "pond design steps", "design restrictions", "import sanitary loads", "extreme flow conditions", "appropriate runoff method", "scenario management tools", "advanced engineering tools", "SewerGEMS calibration tools", "Produce average concentration", "analyze low impact development", "wastewater engineering problems", "low impact development controls", "customizable engineering library", "Hydraulic Design Series Number 5", "unnecessary pipe trench excavation" ], "isarchived": false, "isavailable": false, "applicationid": null, "productindex": 6, "imageuri": "https://productimages.withfloats.com/actual/5aaa54e0c9e1f50adc6038d1.jpg", "tileimageuri": "https://productimages.withfloats.com/tile/5aaa54e0c9e1f50adc6038d1.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2018-03-15T11:11:29.006Z", "updatedon": "2023-08-16T06:19:19.92Z", "buyonlinelink": null, "producturl": "http://WWW.ADVEDUCARE.COM/products/sewergems-perpetual-license-1000-pipes/6", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "Bentley Systems", "category": "Bentley Software", "tags": [ "openflow", "SewerGEMS" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "UniquePaymentUrl", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "64dd17a3635f2700010a84f5", "fptag": "EDUCAREADV", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "Bentley OpenFlows SewerGEMS Virtuosity- Unlimited Pipes Annual Subscription License", "description": "Home> Products> Bentley OpenFlows SewerGEMS Virtuosity- 10000 Pipes Annual Subscription License\nBentley OpenFlows SewerGEMS Virtuosity- 10000 Pipes Annual Subscription License\nHome> Products> Bentley OpenFlows SewerGEMS Virtuosity- 10000 Pipes Annual Subscription License\n18000 18000\nDescriptionWastewat\nDescription\nDescription\nBentley Software by Bentley\nBentley OpenFlows SewerGEMS Virtuosity- 10000 Pipes Annual Subscription License\nINR 632269 INR 650269\nYou Save: INR 18000 (2.77%)\nCHECK ONSEND ENQUIRY\nShare this on : \nDescription\nDescription\nWastewater and stormwater management software\nAdvanced tools for sanitary and combined sewer models\nSewerGEMS is an easy-to-use advanced engineering software for you to analyze, design, and operate sanitary and combined sewer systems. You can decrease decision risks by ensuring that the model uses the best available data, built-in hydraulic and hydrology capabilities, and a variety of wet-weather calibration methods. Easily create what-if scenarios to gain a better understanding of wastewater systems to make smarter decisions, and you can improve your response times. SCADA integration provides you with reliable model results, improves capacity and limits sewer overflows. This enables you to comply with sewer regulations set by regulatory agencies. Better understand surface flood depth and velocity, flood hazard, and inundation times with the new user-friendly 1D/2D hydraulic analysis capability.\n\n\n#Interoperability, Interface, and Graphical Editing\nRuns from within four compatible platforms:\nStand-alone Windows\nArcGIS (ArcMap license required)\nMicroStation (MicroStation license required)\nAutoCAD (AutoCAD license required)\nUnlimited undo and redo\nElement morphing, splitting, and reconnection\nMerge nodes in close proximity tool\nAutomatic element labeling\nScaled, schematic, and hybrid environments\nElement prototypes\nAerial view and dynamic zooming\nNamed views library\nMultiple background-layer support\nSeamless compatibility with WaterCAD and HAMMER\n\n\n#Hydraulics, Operations, and Water Quality\nSteady-state and extended-period simulations\nConstituent-concentration analysis\nMulti-species water quality analysis\nTank-mixing analysis\nWater-age analysis\nWater quality batch run\nCriticality analysis\nFire-flow analysis\nRule-based or logical controls\nVariable-speed pumping, with option to use APEX (Automatic Parameter Estimation eXtension)\nNPSH analysis\nSystem head curves\nLeakage and sprinkler modeling\nWater loss analysis\nPressure-dependent demands\nConventional and unidirectional flushing simulations\nSource tracing\nValve modeling\nAir release valve element\nTop fill tank element\nCombination pump curves\nCarbon emission calculation\nOptimization of pipe renewal with Pipe Renewal Planner\nOverride of pump and valve controls using historical SCADA data\nEmergency response simulations for pipe breaks, power outages, fires, and pipe shutdowns\nReal time modeling\nPressure Zone management\nSupport Districted Metered Areas (DMA) design\n\n\n#Model Building and Data Connection\nDGN, DXF, spreadsheet, database, and ODBC connections\nShapefile, geodatabase*, Geometric Network*, and SDE* connections (*when running from within ArcMap)\nOracle Spatial support\nGIS-ID property to maintain associations between records in the data source / GIS and elements in the model\nSCADAConnect unlimited-signal pack for live data connections (to and from SCADA systems)\nGraphical SCADA element\nCustomer Meter element\nLateral link (no need to split pipes) Automatic demand allocation from geospatial data\nGeospatial demand allocation from customer meters\nDemand allocation from lump-sum geospatial data\nGeospatial-based water consumption projection\nDaily, weekly, monthly, and superimposed patterns\nUnaccounted for water and leakage estimation\nComposite demands global edition\nArea, count, discharge, and population-based loading\nPipe-length-based demand loading\nElevation extraction from DEM, TIN, and shapefiles\nElevation extraction from CAD drawings and surfaces\nSeries, parallel, branch-trimming, multi-criteria automated skeletonization of pipes\nSkeletonization support for isolation valves\nUser-data extension, including formula based\nBing Maps support\nModel sync In/Out, update a model or sync out to an external file\n\n#Model Management\nUnlimited scenarios and alternatives\nComprehensive scenario management\nGlobal attribute tabular edition\nAutomated model skeletonization\nPersonalizable engineering libraries\nSorting and persistent filtering on tabular reports\nStatistical analysis from tabular reports\nDynamic and static selection sets\nLocal and global engineering-units management\nSub-model management\nDrawing review tools for connectivity consistency\nAutomatic topology review\nOrphaned nodes and dead-end pipes queries\nChange tracking\n#Results Presentation\nThematic mapping with property-based color-coding, symbology, and annotations\nDynamic, multi-parameter, and multi-scenario graphing\nScenario and element comparison\nShapefile contouring\nAdvance profiling\nAdvanced tabular reporting with FlexTables\nCreation of Google Earth (KML) files\nPublishing of i-models in 2D or 3D, including to Bentley Map® Mobile\nVideo recording of result animation\nCustomizable reports\n\n#Optimization (using Genetic Algorithm)\nAutomated model calibration with Darwin Calibrator\nIdentify leaks locations with Darwin Calibrator\nOptimized design and rehabilitation with Darwin Designer\nOptimized pump scheduling with Darwin Scheduler\n\n#Energy and Capital-cost Management\nEnergy cost analysis\nCapital cost analysis\nPump and turbine energy analysis", "price": 869773.0, "discountamount": 43000.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": null, "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 56, "imageuri": "https://productimages.withfloats.com/actual/64dd17a9a673410001642e2f.png", "tileimageuri": "https://productimages.withfloats.com/tile/64dd17a9a673410001642e2f.png", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2023-08-16T18:38:27.407Z", "updatedon": "2024-04-01T12:07:18.04Z", "buyonlinelink": null, "producturl": "http://WWW.ADVEDUCARE.COM/products/bentley-openflows-sewergems-virtuosity-unlimited-pipes-annual-subscription-license/56", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "Bentley", "category": "Bentley Software", "tags": [ "SewerGEMS", "watergems", "Bentley software", "bentley systems" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "UniquePaymentUrl", "producttype": "products", "hsncode": null, "gstslab": 0.001, "isnotforsale": false }, { "_id": "64dd131f7191e90001251b6f", "fptag": "EDUCAREADV", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "Bentley OpenFlows SewerGEMS Virtuosity- 10000 Pipes Annual Subscription License", "description": "Description\nWastewater and stormwater management software\nAdvanced tools for sanitary and combined sewer models\nSewerGEMS is an easy-to-use advanced engineering software for you to analyze, design, and operate sanitary and combined sewer systems. You can decrease decision risks by ensuring that the model uses the best available data, built-in hydraulic and hydrology capabilities, and a variety of wet-weather calibration methods. Easily create what-if scenarios to gain a better understanding of wastewater systems to make smarter decisions, and you can improve your response times. SCADA integration provides you with reliable model results, improves capacity and limits sewer overflows. This enables you to comply with sewer regulations set by regulatory agencies. Better understand surface flood depth and velocity, flood hazard, and inundation times with the new user-friendly 1D/2D hydraulic analysis capability.\n\n\n#Interoperability, Interface, and Graphical Editing\nRuns from within four compatible platforms:\nStand-alone Windows\nArcGIS (ArcMap license required)\nMicroStation (MicroStation license required)\nAutoCAD (AutoCAD license required)\nUnlimited undo and redo\nElement morphing, splitting, and reconnection\nMerge nodes in close proximity tool\nAutomatic element labeling\nScaled, schematic, and hybrid environments\nElement prototypes\nAerial view and dynamic zooming\nNamed views library\nMultiple background-layer support\nSeamless compatibility with WaterCAD and HAMMER\n\n\n#Hydraulics, Operations, and Water Quality\nSteady-state and extended-period simulations\nConstituent-concentration analysis\nMulti-species water quality analysis\nTank-mixing analysis\nWater-age analysis\nWater quality batch run\nCriticality analysis\nFire-flow analysis\nRule-based or logical controls\nVariable-speed pumping, with option to use APEX (Automatic Parameter Estimation eXtension)\nNPSH analysis\nSystem head curves\nLeakage and sprinkler modeling\nWater loss analysis\nPressure-dependent demands\nConventional and unidirectional flushing simulations\nSource tracing\nValve modeling\nAir release valve element\nTop fill tank element\nCombination pump curves\nCarbon emission calculation\nOptimization of pipe renewal with Pipe Renewal Planner\nOverride of pump and valve controls using historical SCADA data\nEmergency response simulations for pipe breaks, power outages, fires, and pipe shutdowns\nReal time modeling\nPressure Zone management\nSupport Districted Metered Areas (DMA) design\n\n\n#Model Building and Data Connection\nDGN, DXF, spreadsheet, database, and ODBC connections\nShapefile, geodatabase*, Geometric Network*, and SDE* connections (*when running from within ArcMap)\nOracle Spatial support\nGIS-ID property to maintain associations between records in the data source / GIS and elements in the model\nSCADAConnect unlimited-signal pack for live data connections (to and from SCADA systems)\nGraphical SCADA element\nCustomer Meter element\nLateral link (no need to split pipes) Automatic demand allocation from geospatial data\nGeospatial demand allocation from customer meters\nDemand allocation from lump-sum geospatial data\nGeospatial-based water consumption projection\nDaily, weekly, monthly, and superimposed patterns\nUnaccounted for water and leakage estimation\nComposite demands global edition\nArea, count, discharge, and population-based loading\nPipe-length-based demand loading\nElevation extraction from DEM, TIN, and shapefiles\nElevation extraction from CAD drawings and surfaces\nSeries, parallel, branch-trimming, multi-criteria automated skeletonization of pipes\nSkeletonization support for isolation valves\nUser-data extension, including formula based\nBing Maps support\nModel sync In/Out, update a model or sync out to an external file\n\n#Model Management\nUnlimited scenarios and alternatives\nComprehensive scenario management\nGlobal attribute tabular edition\nAutomated model skeletonization\nPersonalizable engineering libraries\nSorting and persistent filtering on tabular reports\nStatistical analysis from tabular reports\nDynamic and static selection sets\nLocal and global engineering-units management\nSub-model management\nDrawing review tools for connectivity consistency\nAutomatic topology review\nOrphaned nodes and dead-end pipes queries\nChange tracking\n#Results Presentation\nThematic mapping with property-based color-coding, symbology, and annotations\nDynamic, multi-parameter, and multi-scenario graphing\nScenario and element comparison\nShapefile contouring\nAdvance profiling\nAdvanced tabular reporting with FlexTables\nCreation of Google Earth (KML) files\nPublishing of i-models in 2D or 3D, including to Bentley Map® Mobile\nVideo recording of result animation\nCustomizable reports\n\n#Optimization (using Genetic Algorithm)\nAutomated model calibration with Darwin Calibrator\nIdentify leaks locations with Darwin Calibrator\nOptimized design and rehabilitation with Darwin Designer\nOptimized pump scheduling with Darwin Scheduler\n\n#Energy and Capital-cost Management\nEnergy cost analysis\nCapital cost analysis\nPump and turbine energy analysis", "price": 695788.0, "discountamount": 34000.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "3D", "DMA", "DGN", "DXF", "redo", "APEX", "fires", "Local", "count", "ArcGIS", "HAMMER", "option", "weekly", "records", "variety", "formula", "monthly", "Override", "elements", "sanitary", "database", "WaterCAD", "i-models", "capacity", "Creation", "velocity", "schematic", "discharge", "Interface", "symbology", "splitting", "Rule-based", "Operations", "Hydraulics", "shapefiles", "FlexTables", "data source", "Aerial view", "Merge nodes", "Description", "spreadsheet", "pipe breaks", "review tools", "Lateral link", "CAD drawings", "flood hazard", "Google Earth", "Optimization", "Steady-state", "Conventional", "alternatives", "associations", "reconnection", "external file", "views library", "power outages", "SCADA systems", "understanding", "Advanced tools", "Valve modeling", "valve controls", "Unlimited undo", "decision risks", "global edition", "response times", "Orphaned nodes", "rehabilitation", "ArcMap license", "pipe shutdowns", "sewer overflows", "pump scheduling", "leaks locations", "Darwin Designer", "dynamic zooming", "surfaces Series", "AutoCAD license", "Change tracking", "Video recording", "tabular reports", "customer meters", "logical controls", "inundation times", "isolation valves", "Thematic mapping", "Darwin Scheduler", "ODBC connections", "result animation", "Interoperability", "SDE* connections", "Composite demands", "Graphical Editing", "sewer regulations", "SCADA integration", "Bentley OpenFlows", "model calibration", "Darwin Calibrator", "Genetic Algorithm", "smarter decisions", "Advance profiling", "Bing Maps support", "Geometric Network", "leakage estimation", "Real time modeling", "element comparison", "Water-age analysis", "wastewater systems", "sprinkler modeling", "Fire-flow analysis", "Bentley Map® Mobile", "User-data extension", "Unlimited scenarios", "Water loss analysis", "regulatory agencies", "surface flood depth", "best available data", "Shapefile contouring", "MicroStation license", "Customizable reports", "Energy cost analysis", "persistent filtering", "Pipe Renewal Planner", "Sub-model management", "Tank-mixing analysis", "Statistical analysis", "Elevation extraction", "Criticality analysis", "close proximity tool", "static selection sets", "Capital cost analysis", "historical SCADA data", "combined sewer models", "model skeletonization", "KML) files Publishing", "live data connections", "superimposed patterns", "hydrology capabilities", "combined sewer systems", "Customer Meter element", "Oracle Spatial support", "dead-end pipes queries", "Variable-speed pumping", "Seamless compatibility", "reliable model results", "Skeletonization support", "Graphical SCADA element", "multi-scenario graphing", "Water quality batch run", "Capital-cost Management", "turbine energy analysis", "Pressure Zone management", "population-based loading", "lump-sum geospatial data", "connectivity consistency", "Air release valve element", "Automatic topology review", "four compatible platforms", "Pressure-dependent demands", "Automatic element labeling", "Advanced tabular reporting", "Automatic demand allocation", "Carbon emission calculation", "property-based color-coding", "extended-period simulations", "Geospatial demand allocation", "advanced engineering software", "Emergency response simulations", "stormwater management software", "wet-weather calibration methods", "Pipe-length-based demand loading", "Global attribute tabular edition", "NPSH analysis System head curves", "Support Districted Metered Areas", "Comprehensive scenario management", "Multiple background-layer support", "SCADAConnect unlimited-signal pack", "Constituent-concentration analysis", "global engineering-units management", "Personalizable engineering libraries", "Multi-species water quality analysis", "annotations Dynamic, multi-parameter", "hybrid environments Element prototypes", "Automatic Parameter Estimation eXtension", "Top fill tank element Combination pump curves", "unidirectional flushing simulations Source tracing", "Geospatial-based water consumption projection Daily", "new user-friendly 1D/2D hydraulic analysis capability", "SewerGEMS Virtuosity- 10000 Pipes Annual Subscription License", "parallel, branch-trimming, multi-criteria automated skeletonization" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 55, "imageuri": "https://productimages.withfloats.com/actual/64dd1321f3aede0001adbdfb.png", "tileimageuri": "https://productimages.withfloats.com/tile/64dd1321f3aede0001adbdfb.png", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2023-08-16T18:19:11.158Z", "updatedon": "2024-04-01T12:08:29.492Z", "buyonlinelink": null, "producturl": "http://WWW.ADVEDUCARE.COM/products/bentley-openflows-sewergems-virtuosity-10000-pipes-annual-subscription-license/55", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "Bentley", "category": "Bentley Software", "tags": [ "watergems", "Bentley software", "bentley systems", "SewerGEMS" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "UniquePaymentUrl", "producttype": "products", "hsncode": null, "gstslab": 0.001, "isnotforsale": false } ], "hasmoreitems": false, "isapirequest": false, "totalresults": 27, "query": null, "floatingpoint": null }